Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. For chassis-by-wire in four-wheel independent drive electric vehicles (4WID-EVs), a large number of controllable actuators with control systems and electrical systems make the vehicle more sensitive to the failure of electronic components in actuators. When actuator faults occur, the stability and handling performance of 4WID-EVs will deteriorate, even affecting the driving safety. To handle this problem, the typical actuator faults of 4WID-EVs and their characteristics are firstly analyzed in detail. After that, a control-oriented uncertain 7 degrees of freedom vehicle dynamics model is established. Then, a modified sliding mode active fault tolerant control (FTC) scheme with layered architecture is proposed, which contains the upper and lower layers. In the upper layer, a modified sliding mode controller with a nonlinear extended state observer is designed to track the reference states under the influence of model uncertainty. In the lower layer, an improved torque distribution algorithm is proposed to compensate for the limited direct yaw moment caused by in-wheel motor faults. Comparison works are carried out both in simulation and experiment. Simulation results show that the proposed method improves performance by 80.5% and 70.2% compared with existing FTC method under 2 fault conditions, respectively. Furthermore, real vehicle experiments also indicate that the proposed method improves performance by 59.6% and 74.4% under two pre-set fault conditions, respectively. The proposed method might provide a theoretical reference for actual controller design in 4WID-EVs.

In-Wheel Motor Fault Diagnosis For Electric Ground Vehicles

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Active fault-tolerant control scheme for four-wheel independent drive electric vehicles under actuator faults

Model-independent Self-Tuning Fault-Tolerant Control Method for 4WID EV

Research on Fault-Tolerant Control of Distributed-Drive Electric Vehicles Based on Fuzzy Fault Diagnosis

Fault Tolerant Sensorless Control Strategy With Multi-States Switching Method for In-Wheel Electric Vehicle

Active Fault-Tolerant Control Based on Multiple Input Multiple Output-Model Free Adaptive Control for Four Wheel Independently Driven Electric Vehicle Drive System

Adaptive Fault-Tolerant Control for 4WID-4WIS Electric Vehicles under Steering System Failures

Traction fault accommodation system for four wheel independently driven electric vehicle

In-Wheel Motor Fault Diagnosis Using Affinity Propagation Minimum-Distance Discriminant Projection and Weibull-Kernel-Function-Based SVDD

Unified Fault-Tolerant Control and Adaptive Velocity Planning for 4WID-4WIS Vehicles under Multi-Fault Scenarios

Four-Wheel Independent Drive Electric Vehicle Stability Control Using Novel Adaptive Sliding Mode Control

Investigation of a Novel Five-Phase Modular Permanent-Magnet In-Wheel Motor

Intelligent Diagnosis Based on Double-Optimized Artificial Hydrocarbon Networks for Mechanical Faults of In-Wheel Motor

Path tracking fault-tolerant control of intelligent distributed drive electric vehicle based on sliding mode observer

Research on failure classification and control strategy of four-wheel independent drive electric vehicle drive system

Backup Pattern for traction system of FWIA electric vehicle to guarantee maneuverability and stability in presence of motor faults and failures

Dynamic Testing of In-Wheel Motor Based Electric Vehicle in Longitudinal Direction

Fault-tolerant control of in-wheel switched reluctance motor drive systems for vehicles under regenerative braking condition

Fault‐tolerant path‐following control for in‐wheel‐motor‐driven autonomous ground vehicles with differential steering

Vehicle Stability Control with Four-Wheel Independent Braking, Drive and Steering on In-Wheel Motor-Driven Electric Vehicles