Abstract:Ni2P/SBA-15 precursors with Ni2P loadings of 25 wt% and initial P/Ni of 0.8 were prepared using nickel nitride as nickel source, diammonium hydrogen phosphide as phosphorus and mesopore molecular sieve SBA-15 as support. Then Ce was introduced into the Ni2P/SBA-15 precursor. The novel mesoporous Ce-Ni2P/SBA-15 catalysts were prepared after temperature-programmed reduction in flowing H2. The structure was characterized by X-ray diffraction, N2 adsorption–desorption isotherms, NH3 temperature-programmed desorption and X-ray photoelectron spectroscopy. The catalytic activities for the hydrodesulfurization (HDS) of dibenzothiophene (DBT) were evaluated. The results showed that only Ni2P phase was formed in Ce-Ni2P/SAB-15 catalysts with Ce loadings of 0–5 wt%. Ni2P and Ni12P5 phases were existed in 7 wt% Ce-Ni2P/SBA-15 catalyst. The surface area and pore volume increased when Ce was added to Ni2P/SBA-15 catalyst. The strength of the acid sites and total acid amount of Ce-Ni2P/SBA-15 catalysts increased with increasing Ce loadings. Ce existed in the form of Ce3+and Ce4+, Ni existed in the form of Ni2+ and Niδ+, and P existed in the form of Pδ− and P5+. The addition of Ce to the Ni2P/SBA-15 catalyst decreased Niδ+ concentration in Ni2P/SBA-15 catalyst. The activity for HDS of DBT over Ni2P/SBA-15 catalysts was affected by the addition of Ce at 300–340 °C. The catalysts exhibited a good catalytic performance of deep hydrodesulfurization of dibenzothiophene and the conversion of DBT can reach 98.9 % at 380 °C. Biphenyl was the main product over Ce-Ni2P/SBA-15 catalysts and cyclohexylbenzene was the main product over Ni2P/SBA-15 catalyst at 380 °C.

Influences of Cerium on Structure and Catalytic Performance of N-Heptane Hydroisomerization of Ni-HPW/MCM-48

Hydroisomerization of N-Heptane over HPMo-Ni/Ce-MCM-48 Catalysts

Preparation of Pd/Ce(F)-MCM-48 catalysts and their catalytic performance of n-heptane isomerization

Preparation of Pd/Ce(F)-MCM-48 catalysts and their catalytic performance of <i>n</i>-heptane isomerization

Effects of Cerium Doping on Pt–Sn/Al2O3 Catalysts for N-Heptane Reforming

Promotion effect of cerium in ZSM-22 zeolite on the hydroisomerization of n-hexadecane

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Study on the Preparation and N-Heptane Isomerization Performance of MoOx-Pd/Ce-MCM-48 Catalyst.

Synthesis of Ce-MCM-41 mesoporous solids and catalytic evaluation of Ni/Ce-MCM-41 catalysts for hydrogen production

Effect of Ceria Amount on Promoting Ni-Co/SBA-15 Catalyst for n-Dodecane Steam Reforming

The Geometric and Electronic Effects of Ceria on Promoting PdZn Catalyst for Enhanced Acetylene Semi‐Hydrogenation

Hydrogenolysis of Glycerol Aqueous Solution to Glycols over Ni–Co Bimetallic Catalyst: Effect of Ceria Promoting

Ni/Sapo-11 Promoted By Rare Earth Element Ce For Hydroisomerization Of N-Heptane

CO2 Methanation on the Catalyst of Ni/MCM-41 Promoted with CeO2

Crystal-Plane and Shape Influences of Nanoscale CeO2 on the Activity of Ni/CeO2 Catalysts for Maleic Anhydride Hydrogenation

Preparation of novel mesoporous Ce-Ni2P/SBA-15 catalysts and their catalytic performance for hydrodesulfurization of dibenzothiophene

Insights into Influence of CeO2 Crystal Structure Effects on Hydrothermal Hydrogenation for Palmitic Acid over Ni/CeO2 Catalysts

Effect of CeH2.73-CeO2 Composites on the Desorption Properties of Mg2NiH4.

Unusual roles of ceria as the support of a single-atom catalyst in hydroisomerization of n -heptane: Phase boundary acts as transport channels between different active centers

Atomically Dispersed Palladium to Enhance the Propyne Semihydrogenation over CeO2 Catalysts

Ce-introduced Effects on Modification of Acidity and Pt Electronic States on Pt-Sn/γ-Al2O3 Catalysts for Catalytic Reforming