Abstract:A new facility for microdiffraction strain measurements and microfluorescence mapping has been built on beamline 12.3.2 at the advanced light source of the Lawrence Berkeley National Laboratory. This beamline benefits from the hard x-radiation generated by a 6 T superconducting bending magnet (superbend). This provides a hard x-ray spectrum from 5 to 22 keV and a flux within a 1 microm spot of approximately 5x10(9) photons/s (0.1% bandwidth at 8 keV). The radiation is relayed from the superbend source to a focus in the experimental hutch by a toroidal mirror. The focus spot is tailored by two pairs of adjustable slits, which serve as secondary source point. Inside the lead hutch, a pair of Kirkpatrick-Baez (KB) mirrors placed in a vacuum tank refocuses the secondary slit source onto the sample position. A new KB-bending mechanism with active temperature stabilization allows for more reproducible and stable mirror bending and thus mirror focusing. Focus spots around 1 microm are routinely achieved and allow a variety of experiments, which have in common the need of spatial resolution. The effective spatial resolution (approximately 0.2 microm) is limited by a convolution of beam size, scan-stage resolution, and stage stability. A four-bounce monochromator consisting of two channel-cut Si(111) crystals placed between the secondary source and KB-mirrors allows for easy changes between white-beam and monochromatic experiments while maintaining a fixed beam position. High resolution stage scans are performed while recording a fluorescence emission signal or an x-ray diffraction signal coming from either a monochromatic or a white focused beam. The former allows for elemental mapping, whereas the latter is used to produce two-dimensional maps of crystal-phases, -orientation, -texture, and -strain/stress. Typically achieved strain resolution is in the order of 5x10(-5) strain units. Accurate sample positioning in the x-ray focus spot is achieved with a commercial laser-triangulation unit. A Si-drift detector serves as a high-energy-resolution (approximately 150 eV full width at half maximum) fluorescence detector. Fluorescence scans can be collected in continuous scan mode with up to 300 pixels/s scan speed. A charge coupled device area detector is utilized as diffraction detector. Diffraction can be performed in reflecting or transmitting geometry. Diffraction data are processed using XMAS, an in-house written software package for Laue and monochromatic microdiffraction analysis.

An Undulator Based Scanning Microscope at the National Synchrotron Light Source

X-ray microscopy instrumentation developments at NSLS-II: recent progress and future directions

High-resolution soft X-ray emission spectrograph at advanced light source

Design of the New Soft X-ray Beamline for in Situ Analysis of Energy Materials at National Synchrotron Radiation Laboratory

High Resolution Hard X-Ray Microscope On A Second Generation Synchrotron Source

Soft X-ray microscopy using the synchrotron radiation from the NSRL at Hefei

Implementation of Soft X-Ray Microscopy with Several Tens Nanometers Spatial Resolution at NSRL

Multibeam X-ray tomography optical system for narrow-energy-bandwidth synchrotron radiation

Biological X-Ray Spectroscopy On 3rd-Generation Synchrotron-Radiation Sources

Performance of the undulator based ultraviolet and soft x-ray beamline for catalysis and surface science at National Synchrotron Radiation Laboratory

Three Dimensional Imaging of Biological Samples and Nano-materials Using Soft X-ray Microscopy

A Laboratory-based Hard X-ray Monochromator for High-Resolution X-ray Emission Spectroscopy and X-ray Absorption Near Edge Structure Measurements

Indirect detector for ultra‐high‐speed X‐ray micro‐imaging with increased sensitivity to near‐ultraviolet scintillator emission

A Dedicated Superbend X-Ray Microdiffraction Beamline for Materials, Geo-, and Environmental Sciences at the Advanced Light Source

Laboratory x-ray nano-computed tomography for biomedical research

Biological Small-Angle X-Ray Scattering Facility at the Stanford Synchrotron Radiation Laboratory

Design and Commission of A Superconducting Wiggler X-Ray Beamline for Advanced Materials Investigation at the National Synchrotron Radiation Research Center

The new X-ray/visible microscopy MAXWELL technique for fast three-dimensional nanoimaging with isotropic resolution

An innovative in situ AFM system for a soft X-ray spectromicroscopy synchrotron beamline

A High Resolution, Hard X-ray Bio-imaging Facility at SSRL