Abstract:The microstructures in the templates are replicated on the surfaces of large-sized polypropylene samples using microinjection-compression molding in one step. The surfaces molded via the two sieves with different meshes exhibit the dual-level microstructure,which consists of micro pyramids with high aspect ratio and micro ridges. The surfaces molded via four templates, which consist of the aforementioned two sieves stacked with punched plates with different hole diameters, exhibit the three-level microstructure. The three-level microstructure consists of the uniformly distributed micro columns and the aforementioned dual-level microstructures on the top surfaces of the micro columns. All the six surfaces have the static contact angles of above 1500 (i.e., exhibit superhydrophobicity) and the rolling angles of from 5. 5 degrees to more than 9 degrees (i.e., exhibit a wide range of manipulation for the adhesion). For the surface having small-diameter micro columns and a few micro pyramids and micro ridges on their top surfaces, the water droplet forms a global non-composite state,thus high adhesion appears (the petal effect). For the surface having small-diameter micro columns and a number of micro pyramids and micro ridges on their top surfaces, the water droplet forms a localized non-composite state, thus relatively high adhesion appears. For the surfaces having the dual-level microstructures or having large-diameter micro columns and a number of micro pyramids and micro ridges on their top surfaces, the water droplets form a global composite state, thus lower adhesion appears; especially, the surfaces having small-sized micro pyramids and narrower gaps between the micro pyramids exhibit low adhesion (the lotus-leaf effect).

Biomimetic honeycomb-patterned surface as the tunable cell adhesion scaffold

Bioinspired design of honeycomb structure interfaces with controllable water adhesion.

Biomimicking micropatterned surfaces and their effect on marine biofouling.

Synergetic adhesion in highly adaptable bio-inspired adhesive

Designing polystyrene honeycomb-like microstructure with high water adhesion

Mussel-Inspired Modification of Honeycomb Structured Films for Superhydrophobic Surfaces with Tunable Water Adhesion

Design of Honeycomb Structure Surfaces with Controllable Oil Adhesion Underwater

Rapid transfer of hierarchical microstructures onto biomimetic polymer surfaces with gradually tunable water adhesion from slippery to sticky superhydrophobicity

In Situ Growth of A Polyphosphazene Nanoparticle Coating on A Honeycomb Surface: Facile Formation of Hierarchical Structures for Bioapplication

Special Adhesion of Natural Honeycomb Walls and Their Application.

Nature-Inspired Hydrogel Network for Efficient Tissue-Specific Underwater Adhesive

Hybrid Surface Patterns Mimicking the Design of the Adhesive Toe Pad of Tree Frog

Development of wet adhesion of honeybee arolium incorporated polygonal structure with three-phase composite interfaces

Bioinspired Multiscale Wet Adhesive Surfaces: Structures and Controlled Adhesion

Multiple Liquid Manipulations on Patterned Surfaces with Tunable Adhesive Property

A facile approach for preparing biomimetic polymer macroporous structures with petal or lotus effects

Robust And Hydrophilic Polymeric Films With Honeycomb Pattern And Their Cell Scaffold Applications

Orchestrating Asymmetric Surface Functionalities on Hydrogel Stamps where Adhesion Meets Lubrication

Design of Microstructures on Superhydrophobic Polymeric Surfaces with Tunable Adhesion

Ladybug-inspired Hierarchical Composite Adhesives for Enhanced Surface Adaptability

Hydrophilicity–hydrophobicity Adjustable Polymer-Modified Surfaces from One-Step Dip-Coating Method