Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Effect of Interface on Performances of PE-LLD/Al(OH)3 Composites

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

The Preparation of Polyethylene/Collagen Composites by Using Reactive Compatibilization Process

Enhancement of Insulation Properties of LLDPE by PPy-functionalized PS-NPs

Polymer Composite with Enhanced Thermal Conductivity and Insulation Properties through Aligned Al2O3 Fiber

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Influence of Interfacial Adhesion on Stress-Strain Properties of Highly Filled Polyethylene

Effect of Different Surface Treatment Agents on the Physical Chemistry and Electrical Properties of Polyethylene Nano‐alumina Nanocomposites

Enhancing the Interfacial Properties of Polyethylene-Based Carbon Fiber Composites Through Low-Temperature Thermally Reduced Graphene

Enhancement in Electrical and Thermal Properties of LDPE with Al2O3 and h-BN as Nanofiller

The effect of addition of poly(propylene-g-acrylic acid) on the morphology of poly(vinyl methylether) and isotactic polypropylene blend

Effect of Different Coupling Agents on Interfacial Properties of Fibre-Reinforced Aluminum Laminates

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film

High-density polyethylene composite filled with red mud: effect of coupling agent on mechanical and thermal properties

Flow‐field‐assisted Shaping of Linear Low‐density Polyethylene/low‐entanglement Ultra‐high Molecular Weight Polyethylene Blends with Enhanced Mechanical Properties and Thermal Conductivity

High electrical conductivity and elastic modulus composites comprising glass fiber-reinforced carbon-filled high-density polyethylene

Effect of Inorganic–organic Interface Adhesion on Mechanical Properties of Al2O3/polymer Laminate Composites

Effects of Macromolecular Compatibilizers Containing Epoxy Groups on the Properties of Linear Low-Density Polyethylene/Magnesium Hydroxide Composites

Preparation, Microstructure and Properties of Polyethylene/alumina Nanocomposites for HVDC Insulation

Effect of Layered Double Hydroxide and Its Localization on the Structure and Properties of PBAT/PPC Composites