Abstract:Abstract Reliable fluid film bearings for high-performance turbomachinery provide significantly extended operating life with controllable stiffness and damping force coefficients at low cost. Hydrostatic thrust bearings support thrust loads and control axial motions. This paper reports measurements and predictions of static and dynamic load characteristics of a hydrostatic thrust bearing fed with pressurized air. The current bearing model uses dynamic axial periodic motion amplitudes, that is, models as a function of the initial film thickness, to predict the dynamic force coefficients. Note that, presently, the recorded frequencies and their amplitudes of pneumatic hammer instability along the axial direction are implemented as an external excitation source. The measured and predicted static stiffnesses increase as the film thickness decrease and supply pressure into the bearing increase. The predicted dynamic force coefficients show a favorable agreement with the test data. Analysis reveals the negative damping coefficients and damping ratios as a distinctive onset condition of the present pneumatic hammer instability of the test bearing. A careful recess design and adequate operation conditions along with an accurate prediction can avoid or prevent undesirable pneumatic hammer instability in hydrostatic thrust bearings. This work extends the knowledge database of hydrostatic thrust bearings with pneumatic hammer instability and provides their design guideline for various operating conditions.

Analysis of pneumatic hammer in rectangular aerostatic thrust bearing with groove

Pneumatic hammer characteristics of the aerostatic thrust bearing with central orifice and pressure-equalizing groove

Improving the Pneumatic Hammer Stability of Aerostatic Thrust Bearing with Recess Using Damping Orifices

Pneumatic Stability Analysis of Single-Pad Aerostatic Thrust Bearing with Pocketed Orifice

Finite-Element Analysis of Aerostatic Lubrication with Porous Restrictors Based on Hypermesh

Analysis of the dynamic characteristics of downsized aerostatic thrust bearings with different pressure equalizing grooves at high or ultra-high speed

Study on the pneumatic hammer phenomenon of aerostatic bearings based on the empirical mode method: numerical and experimental analysis

Analysis of Dynamic Stiffness and Damping of Partial Porous Aerostatic Thrust Bearings

Experimental Force Coefficients of a Hydrostatic Thrust Bearing and Comparisons to Predictions

On the Analysis of Aerostatic Thrust Bearings with the Differential Quadrature Method

Study on generation mechanism and stability analysis for air hammer of air-bearing slider

Structure optimization of aerostatic thrust bearing based on air film pressure field characteristics analysis

Modelling and performance improvement of an annular grooved thrust air bearing

Aerostatic thrust bearing performances analysis considering the fluid-structure coupling effect

Stability Analysis for Fully Hydrodynamic Gas-Lubricated Protuberant Foil Bearings in High Speed Turbomachinery

Study of Externally Pressurized Air Thrust Bearings with Multi-Rows Supply Holes

Static Analysis of Viscoelastic Supported Gas Foil Thrust Bearing with Journal Inclination

Dynamic analysis of a high-speed micro compressor supported by spiral-grooved hydrodynamic air bearing

Preliminary Experimental Study on Static Loading Characteristics of Multi-Decked Protuberant Foil Thrust Bearing

Static Characteristic Analysis of Aerodynamic Gas Thrust Bearing Based on Finite Difference Method

A Numerical Investigation of the Effects of Groove Texture on the Dynamics of a Water-Lubricated Bearing–Rotor System