Abstract:The laser ablation of aluminum alloy 6061 was studied both experimentally and by computational modeling in this work. Six variations of the number of pulses of irradiation (1, 5, 10, 20, 50, and 100 pulses) combined with four different laser fluence (2.0 J/cm2, 1.5 J/cm2, 1.0 J/cm2, and 0.5 J/cm2) were chosen to study the effect of heat input and laser action time on microstructural changes and the generation of particulate pollutants. Laser fluence and the number of pulses of laser irradiation were found to have a direct influence on thermal diffusion and the ablation depth of aluminum alloy 6061. At a relatively high laser fluence (2 J/cm2) and with the application of 10 pulses of irradiation, ablation cracks were observed on the surface of aluminum alloy 6061 and the production of pollutant particles increased according to a particle counter. Maintaining the laser fluence at 0.5 J/cm2 while increasing the number of pulses of irradiation to 50 also enhanced the depth of thermal diffusion while laser ablation continued to occur. The occurrence of vaporization in the surface region was influenced largely by laser fluence and the number of pulses of irradiation, as evident from the simulation and from experimental results. The single laser pulse duration was 6 ns and the repetition rate was 1 s−1. This article provides a novelty numerical model which could reveal the metal alloys' evapotation at a high-fluence nanosecond laser ablation. A 3D computational model was used to predict the temperature variation upon laser irradiation in a solid material over time. The results of the model (thermal diffusion versus laser ablation) agreed well with the experimental results.

Numerical Simulation of Heat Accumulation Effects with Different Repetition Rate Pulse Laser

Simulation and Analysis of the Time Evolution of Laser Power and Temperature in Static Pulsed XPALs

Numerical simulation of heat transfer properties of skin tissue acted on repetitive laser irradiation

Numerical analysis of wave-type heat transfer propagating in a thin foil irradiated by short-pulsed laser

Two-dimensional Numerical Simulation of Laser-Ablation of Aluminum Material by Nanosecond Laser Pulse

Numerical and Experimental Investigation on Pulsed Nanosecond Laser Ablation Processing of Aluminum Alloy

Numerical simulation of the accumulative photo-thermal effect in silicon under illumination with sequential laser pulses

Numerical Simulation of Temperature Field of Rolling Flying Target Irradiated by Laser

Non-Fourier conduction model with thermal source term of ultra short high power pulsed laser ablation and temperature evolvement before melting

Numerical simulation on the temperature field induced by a nanosecond pulsed excimer laser in the phase-change film

Numerical Simulation of the Temperature Field in Laser-Driven Flyer Plates by High Power Nanosecond Laser–material Interactions

Numerical Analysis of the Temperature Field in Skin-tissue by High Power Nd∶YAG Pulses Laser

Multiscale Investigation of Femtosecond Laser Pulses Processing Aluminum in Burst Mode

Numerical Simulation and Experiments of Multiple Reflection and Stratified Absorption Mechanism of Pulsed Laser in Picosecond Laser

Numerical Analysis and Experimental Verification of Time-Dependent Heat Conduction under the Action of Ultra-Short Pulse Laser

Numerical study on thermal-mechanical impact failure mechanism for annular-focusing laser thrusters

Numerical simulation and experimental study on the heat and mass transfer behavior during the pulsed laser cladding process

Numerical Simulation on Pulsed Laser Ablation of the Single-Crystal Superalloy Considering Material Moving Front and Effect of Comprehensive Heat Dissipation

Numerical simulation of the thermal-mechanical process of high current pulsed electron beam treatment

Theoretical Analysis and Simulation of Pulsed Laser Heating at Interface

High Precision Simulation and Analysis of Non-Fourier Heat Transfer During Laser Processing