Abstract:In this paper, a coupled thermal-fluid-structure numerical model is presented to investigate interactive effects of supersonic airflow, high power laser and metallic target. The numerical model is validated by experiments recently carried out by Lawrence Livermore National Laboratory. The numerical simulation also verified some experimental observations, which show that the convective heat transfer effects of airflow and the aerodynamic pressure play important roles to the damage behavior of laser irradiated target. The convective heat transfer of airflow reduces the temperature of laser irradiated area therefore delays the time reaching damage. When a thin-walled metallic panel is heated up to a high temperature below the melting point, it is softened and the strength nearly vanishes, the aerodynamic pressure becomes a dominant factor that controls the damage pattern even when it is in a low magnitude. The effects of airflow velocity and laser power on the damage behavior of irradiated metallic target are investigated with the aid of the coupled thermal-fluid-structure numerical model, where critical irradiation times to reach the yield failure t yield and melting failure t yield are the main concern. Results show that, when the incidence laser power increases from 500 W/cm2 to 5000 W/cm2, significant drop in failure times are found as the incidence laser power increases. When the Mach number of airflow increases from 1.2 to 4.0 at a given incident laser power, a critical airflow velocity is found for the irradiation time to reach the yield strength and melting point, i.e., the maximum irradiation time to reach failure is found at the Mach 1.8~2.0. The competition of aerodynamic heating before the laser is switch on and airflow cooling after the target is heated up accounts for effects.

Numerical study on thermal-mechanical impact failure mechanism for annular-focusing laser thrusters

Study on Thermal-Mechanical Impact Effects on Parabolic Laser Thrusters

Numerical study on impulse characteristics of laser-supported air-breathing pulsed detonation thrusters

Response of Parabolic Laser Thrusters under Impulsive Thermomechanical Loading

Analysis on the Effects of Optics Thermal Deformation on the Ion Thruster Operation

Influence of Focusing System Structure on Propulsion Performance of Laser Thruster

Experimental Investigation on Ablation Mode of Laser Propulsion

Numerical Analysis of Ultrashort Pulse Laser-Induced Thermomechanical Response of Germanium Thin Films

Coupled Thermal-Fluid-structure Behavior of Airflow over Target Irradiated by High-Power Laser

Analytical and Numerical Study of the Air Breathing Model for Laser Propulsion

Experimental Study on Temperature Effect of Aluminium Rotating Parabolic Laser Thruster

Numerical Simulation of the Temperature Field in Laser-Driven Flyer Plates by High Power Nanosecond Laser–material Interactions

Progress in Thermal-Mechantical Effects Induced by Laser

Thermal Effects in Laser-Induced Strong Shock-Waves

Thermal-mechanical Effects on Rotating Internally Pressured Cylindrical Shell Irradiated by Laser Beam

Thermal and Mechanical Effects of Shells with Inner Pressure Exposed to Continuous-Wave Laser

Critical pulse in multi-shot femtosecond laser ablation on metallic surfaces

Numerical Simulation of a Continuous Wave Laser Powered Thruster with Argon Propellant

Mechanism analysis and numerical simulation of air-breathing model for laser propulsion

Numerical Simulation of Multi-Pulsed Femtosecond Laser Ablation: Effect of a Moving Laser Focus

A Thermo-mechanical Investigation on Laser Ablation of Aluminum Alloy