Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Fabrication of Fiber Bragg Gratings in Embedded-Core Hollow Optical Fiber

Compact Microfiber Bragg Gratings with High-Index Contrast

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Fiber Bragg Grating Inscribed in Dual-Core Photonic Crystal Fiber

Fiber Bragg gratings inscribed in nanobore fibers.

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser

Miniature Fabry-Perot Cavity Based on Fiber Bragg Gratings Fabricated by Fs Laser Micromachining Technique

Fibre Bragg Grating Inscription into a Seven Core Fibre and Its Application As a Vector Bending Sensor

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

High-quality fiber Bragg grating inscribed in ZBLAN fiber using femtosecond laser point-by-point technology.

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

A Novel High-Sensitivity Chirp Tuning Device of Fiber Grating

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Refractive index sensor in eccentric fiber Bragg gratings using a point-by-point IR femtosecond laser