Abstract:The three-dimensional coupled implicit Reynolds Averaged Navier–Stokes (RANS) equations and the two equation standard k–ε turbulence model has been employed to numerically simulate the cold flow field in a typical cavity-based scramjet combustor. The numerical results show reasonable agreement with the schlieren photograph and the pressure distribution available in the open literature. The pressure distribution after the first pressure rise is under-predicted. There are five shock waves existing in the cold flow field of the referenced combustor. The first and second pressure rises on the upper wall of the combustor are predicted accurately with the medium grid. The other three shock waves occur in the core flow of the combustor. The location of the pressure rise due to these three shock waves could not be predicted accurately due to the presence of recirculation zone downstream of the small step. Further, the effect of length-to-depth ratio of the cavity and the back pressure on the wave structure in the combustor has been investigated. The obtained results show that there is an optimal length-to-depth ratio for the cavity to restrict the movement of the shock wave train in the flow field of the scramjet combustor. The low velocity region in the cavity affects the downstream flow field for low back pressure. The intensity of the shock wave generated at the exit of the isolator depends on the back pressure at the exit of the combustor and this in turn affects the pressure distribution on the upper wall of the combustor.

Investigation of the Scramjet Temperature Distribution by Wall Mounted Thermal Couples

Experimental and Numerical Study on Temperature Variation and Air Flow Distribution in Trapped Votex Combustor

Experimental Investigation on the Wall Pressure Influential Factors of Supersonic Combustion

An Investigation on One-Dimensional Model of Heat Release Distribution in Scramjet Combustor

Wall Heat Transfer Measurements in High-Pressure Combustion Devices

Numerical Validation and Parametric Investigation on the Cold Flow Field of a Typical Cavity-Based Scramjet Combustor

Numerical Investigation on Flame-Stabilization Mechanism of Supersonic-Combustor-based High-Temperature CO/H2 Jet

Experimental study on the effect of combustor configuration on the performance of dual-mode combustor

Investigation on the Combustion Mode Translation of Thermal Choked Scramjet

Effect of Combustor Geometry and Fuel Injection Scheme on the Combustion Process in a Supersonic Flow

Experimental and Numerical Analysis of Temperature Distribution on Floating-Wall Flame Tube of Combustor

NUMERICAL SIMULATION OF A DUAL-COMBUSTIORSCRAMJET FLOW-FIELD

Experimental study on measurement and calculation of heat flux in supersonic combustor of scramjet

Experimental study of a flush wall scramjet combustor equipped with strut/wall fuel injection

Numerical Investigation on Performance of Axisymmetric Variable Geometry Scramjet Combustor Equipped with Strut Flame Holder

Experimental Investigation of Combustion Mechanisms of Kerosene-Fueled Scramjet Engines with Double-Cavity Flameholders

Experimental Investigation of Performance of a Strut-Cavity Based Scramjet Combustor in Clean Air

Numerical Study on Strut/Cavity-Based Scramjet Combustor

Non-reacting Flow Visualization of Supersonic Combustor Based on Cavity and Cavity–strut Flameholder

Experimental Investigation on Ignition Schemes of A Supersonic Combustor with the Rearwall-Expansion Cavity

Temperature Measurement at the Exit of Annular Combustor with Slinger in Turbojet Engine