Abstract:Wake vortex evolution of a square cylinder with a slot synthetic jet issuing from the cylinder’s rear surface has been experimentally investigated using the time-resolved particle image velocimetry technique. The Reynolds number based on the side length of the square cylinder is $Re=836$. The excitation frequency normalized by the natural shedding frequency $f_{e}/f_{0}$ varies from 0 to 6 at the dimensionless stroke length $L_{0}/w=72.6$. The distributions of the time-averaged Reynolds stresses present significant differences as the excitation frequency increases. With control, the mean streamwise velocity deficit of the wake recovers more quickly in comparison with the natural case, and the vertical velocity fluctuation intensity becomes weaker. Moreover, a drag reduction can be achieved for the control cases, especially, for $f_{e}/f_{0}=4$ and $f_{e}/f_{0}=6$, a thrust instead of drag reduction can be obtained. The profiles of the mean streamwise velocity tend to have jet-like distributions. The wake vortex dynamics and its evolution with the excitation frequency are revealed. (i) For the low excitation frequency cases ($f_{e}/f_{0}=0.5$, 1, 2), no significant changes in the dominant frequency and the spanwise vortex structures are observed in comparison with the natural case. (ii) For the moderate excitation frequency case ($f_{e}/f_{0}=3$), the wake vortex shedding frequency is locked on half of the control frequency. In this case, the shear layer is divided into two parts by the synthetic jet vortex, and the wake vortices with smaller scales still shed asymmetrically and appear closer to the square cylinder. (iii) For the high excitation frequency case ($f_{e}/f_{0}=6$), the flow is governed by the synthetic jet. As a result of strong perturbations of the synthetic jet, the wake vortex shedding becomes symmetric with the shedding frequency consistent with the control frequency. And the separation is suppressed effectively. The different control effects of the slot synthetic jet on a square cylinder and a circular cylinder are also compared in detail. Generally speaking, the circular cylinder is easier to be controlled due to its non-fixed separation points.

On The Effect Of Various Shrouds On The Wake Of A Circular Cylinder

Experimental Investigation On Flow Around A Cylinder Group In Free Surface Cross Flow

Experimental study on wake structures of a circular cylinder enclosed in a screen shroud using PIV

Wake Vortex Evolution of Square Cylinder with A Slot Synthetic Jet Positioned at the Rear Surface

Experimental research on the flow characteristics and vortex shedding in the flow around a circular cylinder

SUPPRESSION OF VORTEX SHEDDING FROM THIN RECTANGULAR CYLINDERS

Suppression of vortex shedding and vortex-induced vibration of a circular cylinder using screen shrouds

An investigation of wake flows produced by asymmetrically structured porous coated cylinders

Experimental and numerical investigation on the wake flow and vortex shedding of a rotating circular cylinder

Control of Vortex Shedding from Two Side-by-side Cylinders Using a Pair of Tangential Jets

Numerical study on the effect of shape modification to the flow around circular cylinders

Wind and Water Tunnel Experiments on Flow Control for a Circular Cylinder with Axial-Rod Shrouds Attached

Wake of two tandem square cylinders

Suppression of vortex shedding in the wake of a circular cylinder through high-frequency in-line oscillation

Fluid Dynamics Behind a Circular Cylinder Embedded with an Active Flapping Jet Actuator

Numerical Study of Porous Treatments on Controlling Flow around a Circular Cylinder

Suppression of Vortex-Induced Vibration and Phase-Averaged Analysis of the Wake Generated by a Circular Cylinder Covered with Helical Grooves

Effects of Distributed Suction Through the Porous Side-Walls of a Square Cylinder on Separation and Wake Flows

Unsteady large-scale wake structure behind levitated freestream-aligned circular cylinder

Attenuation of vortex street by suction through the structured porous surface

An experimental investigation of the flow control of a circular cylinder in near wake with parallel plates at Re = 7500