Molecular Dynamics Simulation of the Diffusion Behavior of Water in Poly(Vinylidene Fluoride)/Silica Hybrid Membranes

Ruibing Bai,Huixia Wang,Pan Zhang,Bo Xiao,Bo Jiang,Ge Zhou

DOI: https://doi.org/10.1039/c5ra09261b

IF: 4.036

2015-01-01

RSC Advances

Abstract:The effects of inorganic SiO2 particles on the diffusion properties of small penetrant molecules in PVDF/SiO2 hybrid membranes are investigated using MD simulations.

What problem does this paper attempt to address?

Atomistic Simulations of Biofouling and Molecular Transfer of a Cross-linked Aromatic Polyamide Membrane for Desalination

Md Symon Jahan Sajib,Ying Wei,Ankit Mishra,Lin Zhang,Ken-Ichi Nomura,Rajiv K. Kalia,Priya Vashishta,Aiichiro Nakano,Sohail Murad,Tao Wei

DOI: https://doi.org/10.1021/acs.langmuir.0c01308

IF: 3.9

2020-01-01

Langmuir

Abstract:Reverse osmosis through a polyamide (PA) membrane is an important technique for water desalination and purification. In this study, molecular dynamics simulations were performed to study the biofouling mechanism (i.e., protein adsorption) and nonequilibrium steady-state water transfer of a cross-linked PA membrane. Our results demonstrated that the PA membrane surface's roughness is a key factor of surface's biofouling, as the lysozyme protein adsorbed on the surface's cavity site displays extremely low surface diffusivity, blocking water passage, and decreasing water flux. The adsorbed protein undergoes secondary structural changes, particularly in the pressure-driven flowing conditions, leading to strong protein-surface interactions. Our simulations were able to present water permeation close to the experimental conditions with a pressure difference as low as 5 MPa, while all the electrolytes, which are tightly surrounded by hydration water, were effectively rejected at the membrane surfaces. The analysis of the self-intermediate scattering function demonstrates that the dynamics of water molecules coordinated with hydrogen bonds is faster inside the pores than during the translation across the pores. The pressure difference applied shows a negligible effect on the water structure and content inside the membrane but facilitates the transportation of hydrogen-bonded water molecules through the membrane's sub-nanopores with a reduced coordination number. The linear relationship between the water flux and the pressure difference demonstrates the applicability of continuum hydrodynamic principles and thus the stability of the membrane structure.
Solvent Diffusion in Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres by Pulsed Field Gradient Nmr Techniques

Binbo Jiang,Yong Yang,Lijun Du,Carlos Mattea,Jingdai Wang,Siegfried Stapf,Yongrong Yang

DOI: https://doi.org/10.1002/app.40161

IF: 3

2013-01-01

Journal of Applied Polymer Science

Abstract:Polymer-coated SiO2 particles are prepared by precipitation of poly[styrene-co-(acrylic acid)] on SiO2 microspheres through an improved phase inversion method. The diffusion resistance of the polymer membrane was considered to be the critical reason for producing tailor-made polyethylene by catalysts supported on these polymer-coated particles. This paper employs pulsed field gradient NMR (PFG-NMR) to distinguish diffusion of n-hexane in different regimes, i.e., in the space between each particle, the pores in SiO2 and the polymer shell, by their respective diffusion coefficients. By varying the observation time, the time scale of the molecular exchange is discussed. A three-region ansatz was used to interpret the exchange and diffusion in polymer-coated SiO2 system, and was compared with results acquired with noncoated particles. At long diffusion times, the mean-squared displacement, and thus the averaged self-diffusion coefficient, of hexane in the system of polymer-coated SiO2 particles is significantly reduced. The PSA membrane is identified as an efficient barrier against molecular exchange between the pores in SiO2 and the intraparticle space. Consistently, the relaxation measurements indicated that the mobility of n-hexane molecules, especially the rotation of n-hexane, was limited by the PSA membrane. (c) 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40160.
Influence of Solvents on the PVDF Membrane Properties

LU Yin,ZHANG Lin,REN Yuan-long,WANG Ji-zhong

DOI: https://doi.org/10.3969/j.issn.1008-9357.2005.03.014

2005-01-01

Abstract:The action of solvent on the polyvinylidene difluoride (PVDF) membrane prepared by the phase separation method is discussed. The phase separation data were measured by cloud point method for the solution of w__(PVDF)=0.12 with the solvent of DMSO,DMF,DMA,NMP and TMP respectively. The advanced velocity of the phase separation front line when the casting solution was contacted with water was measured by microscope photo method. The pore size of membrane was measured by bulb point method. The results shown that DMSO, TMP and DMA are good solvents to cast PVDF membrane by phase separation method.
Methanol distribution and electroosmotic drag in hydrated poly(perfluorosulfonic) acid membrane.

Xiaobo Ji,Liuming Yan,Suhua Zhu,Liangmiao Zhang,Wencong Lu

DOI: https://doi.org/10.1021/jp8066469

2008-01-01

Abstract:The methanol distribution and electroosmotic drag in hydrated poly(perfluorosulfonic) acid electrolyte membrane are studied using molecular dynamics simulations under various electric fields applied. The results indicate that the methanol molecules are preferentially distributed near the hydrophobic PFSA backbones with their methyl groups in contact with the fluorine atoms and their hydroxyl groups pointing to the hydrophilic subphase. As the hydroxyl groups of methanol forming hydrogen bonds, hydroxyl groups are more likely to accept hydrogen atoms than to donate hydrogen atoms. The calculated methanol diffusion coefficient is in good correspondence with experimental values, and the electroosmotic drag coefficient for methanol is much smaller than that of water molecules.
Molecular Dynamics Simulations of Electroosmosis in Perfluorosulfonic Acid Polymer

Liuming Yan,Xiaobo Ji,Wencong Lu

DOI: https://doi.org/10.1021/jp7121449

2008-01-01

Abstract:An atomistic MD simulation method has been developed to study the electroosmotic drag in the hydrated perfluorosulfonic acid polymer. The transport characteristics of the hydroniums and water molecules are evaluated from their velocity distribution functions with an electric field applied. It is shown that the microstructure of the hydrated perfluorosulfonic acid polymer is not perturbed significantly by the electric field up to 2 V/microm, and the velocity distribution functions obey the peak shifted Maxwell velocity distribution functions. The evaluated peak shifting velocities are only about 1% of the average thermal motion. The hydronium flow and water flow are evaluated from the average transport velocities or the peak shifting velocities. The electroosmotic drag coefficients from the MD simulations are in good correspondence with the experimental values. It is also shown that the electroosmotic drag coefficient has no or weak temperature dependence.
Impact of SiO2 doping on the structure and oil–water separation properties of a PVDF membrane: insights from molecular dynamics simulation

Yi Liu,Jing Zhang,Jiale Li,Yuxing Zhao,Ming Zhang

DOI: https://doi.org/10.1039/d4ra03807j

IF: 4.036

2024-08-02

RSC Advances

Abstract:Hybrid inorganic particles combined with polymers are widely used to modify the properties of polymer membranes. However, the mechanism by which particles affect membranes remains unclear. This study investigates SiO 2 -hybridized PVDF membranes through molecular dynamic simulation, focusing on the interaction between SiO 2 clusters and PVDF chains. It examines the impact of varying SiO 2 concentrations (3.5 wt%, 6.8 wt%, 9.9 wt%, 12.8 wt%, and 15.5 wt%) on membrane stability and structure. The results indicate that adding SiO 2 can inhibit PVDF chain mobility in the membrane with minimal effect on fractional free volume (FFV), except for altering interactions between PVDF–PVDF, PVDF–SiO 2 , and SiO 2 –SiO 2 , thereby affecting the structure of hybrid membranes. The adsorption and diffusion behavior of water and oil molecules on these membranes were also studied. It was observed that the adsorption energy and diffusion coefficient initially increase and then decrease with increasing SiO 2 concentration, reaching an optimum between 6.8 wt% and 12.8 wt%. This phenomenon is attributed to the ability of optimal SiO 2 concentrations to create hydrophilic channels in PVDF membranes, enhancing water affinity and reducing oil affinity. Consequently, water permeation through the hybrid membrane is promoted, improving the efficiency of oil/water separation compared to pure PVDF membranes. This research contributes to understanding the function of adding inorganic particles to polymer membranes and provides insights for designing advanced functional hybrid membranes.

chemistry, multidisciplinary
Molecular dynamics simulation of the transport of H 2 , O 2 , Ar , CH 4 and nC 4 H 10 in composite poly ( 4-methyl-2-pentyne ) and nanoparticle of cristobalite silica and faujasite

Q. Yang,L. E. Achenie

2013-01-01

Abstract:In industrial processes membranes made of composite polymer material are widely employed to separate gas mixtures. These membranes have better performance than membranes consisting of polymer alone. To understand the mechanism and therefore aid membrane design it is essential to explore the penetrant transport in the complex composites from the molecular level, but few researchers have done such research to our knowledge. Silica has different crystalline form. The transport properties of penetrants in the composite of PMP and nanoparticles of these two types of silica are obviously different. Molecular dynamics method was done successfully in the research to explore the transport of different penetrants in the composites of PMP and nanoparticles of two forms of silica, the cristobalite form (PMPC) and the faujasite form (PMPF). .
Effect of Coagulation Bath Temperature on Formation Mechanism of Poly(vinylidene Fluoride) Membrane

Xuyun Wang,Lin Zhang,Dahai Sun,Quanfu An,Huanlin Chen

DOI: https://doi.org/10.1002/app.28169

IF: 3

2008-01-01

Journal of Applied Polymer Science

Abstract:Effects of coagulation bath temperature on the membrane formation mechanism and the morphologies of the formed membranes were studied. The binodal and spinodal lines in the phase diagrams of water/DMAc/Poly(vinylidene fluoride) (PVDF) were calculated based on the thermodynamics equations of membrane formation, and the gel phase boundaries of the systems at 25 degrees C and 60 degrees C were determined via cloud point measurement. The obtained ternary phase diagrams of water/DMAc/PVDF contain three regions: the one-phase region, the liquid-liquid two-phase region, and the gel region. In the phase diagrams, the liquid-liquid demixing line (binodal) is located inside the gelation line. At low temperature, there exists a wide region between gelation line and binodal line. Gelation Could occur in the absence of liquid-liquid demixing, and becomes the dominant membrane formation mechanism. At high temperatures (60 degrees C), however, the gelation line approaches the binodal line, which results in a much smaller gelation zone. The kinetics of the solvent out-flux and water influx were enhanced, liquid-liquid demixing is the dominant mechanism. The membrane formation mechanisms at different temperature were confirmed by the light transmission measurements during membrane forming process and the morphologies of the membranes examined by SEM imaging. (C) 2008 Wiley Periodicals, Inc.
Insight of organic molecule dissolution and diffusion in cross-linked polydimethylsiloxane using molecular simulation

Ali Ahmad,Shen-Hui Li,Zhi-Ping Zhao

DOI: https://doi.org/10.1016/j.memsci.2020.118863

IF: 9.5

2021-02-01

Journal of Membrane Science

Abstract:Polymeric membranes have gained an immense importance for the pervaporation (PV) of biofuels. The PV performance is influenced by several complex elements and significant understanding is empirically fairly difficult. Furthermore, it is essential to specify membrane swelling in different solvents prior to the PV. A molecular dynamics simulation protocol was applied to examine the swelling of cross-linked PDMS membranes in 1-butanol, ethanol, acetone, and water, the dissolution of organic molecule in dilute aqueous solution in PDMS, the PV through these swollen membranes and dissolution rate of guest molecules in membranes. The agglomeration effects of water as well as organic molecules inside cross-linked PDMS membrane during sorption and diffusion processes were also investigated. The effects of predicted cross-linked PDMS on separation performance of membranes, interactions of the guest molecules on the swelling degree and diffusion coefficients follow the experimental trend. The predicted dissolution and diffusion, the diffusion selectivity and mean square displacement of different agglomerated forms of water and alcohol molecules through cross-linked membrane fairly matches the reported experimental results. Moreover, their reliability on the interaction between solvent and polymer, void size distribution and temperature were investigated. The micro level insights into the swelling of cross-linked polymer membranes, dissolution and diffusion of organic molecules and understanding of mass transfer were provided by simulation, which are valuable for making new membranes for high PV performance.

engineering, chemical,polymer science
Molecular Dynamics Simulation of Water Diffusion in Liquid Silicone Rubber

Zhanglei Shi,Zhidong Jia

DOI: https://doi.org/10.1109/icempe51623.2021.9509224

2021-01-01

Abstract:Moisture intrusion plays a major role in the aging of silicone rubber for external insulation, which is essential for grid safety. In order to study the diffusion characteristics of water in silicone rubber from the microscopic point of view, a series of models of liquid silicone rubber containing water molecules were constructed. Based on molecular dynamics simulation, the diffusion coefficients of water were calculated. The results show that water existed in the form of nano clusters when 0.1wt% of water molecules were added, and the interface between silicon dioxide and silicone rubber adsorbed water. The water sensitivity of the interface between silica and silicone rubber and the interface between silicone rubber and silicone rubber was evaluated. Because of the existence of hydroxyl groups on the surface of silica, the interface between silicon dioxide and silicone rubber was more easily invaded by water.
Molecular Dynamics Simulations of Water Structure and Diffusion in a 1 nm Diameter Silica Nanopore as a Function of Surface Charge and Alkali Metal Counterion Identity

Marie Collin,Stéphane Gin,Baptiste Dazas,Thiruvillamalai Mahadevan,Jincheng Du,Ian C. Bourg,Stéphane Gin

DOI: https://doi.org/10.1021/acs.jpcc.8b03902

2018-08-01

The Journal of Physical Chemistry C

Abstract:Water confined in nanoporesparticularly in pores narrower than 2 nmdisplays distinct physicochemical properties that remain incompletely examined despite their importance in nanofluidics, molecular biology, geology, and materials sciences. Here, we use molecular dynamics simulations to investigate the coordination structure and mobility of water and alkali metals (Li, Na, K, Cs) inside a 1 nm diameter cylindrical silica nanopore as a function of surface charge density, a model system particularly relevant to the alteration kinetics of silicate glasses and minerals in geologic formations. We find that the presence of a negative surface charge and adsorbed counterions within the pore strongly impacts water structure and dynamics. In particular, it significantly orients water O–H bonds toward the surface and slows water diffusion by almost 1 order of magnitude. Ion crowding in the charged nanopore enhances the tendency of counterions to coordinate closely with the silica surface, which moderates the impact of ions on water dynamics. Co-ions are strongly excluded from the nanopore at all surface charges, suggesting that the 1 nm diameter cylindrical silica nanopores likely exhibit nearly ideal semipermeable membrane transport properties.
Computer simulation of zwitterionic polymer brush grafted silica nanoparticles to modify polyvinylidene fluoride membrane

Tinglu Chen,Fenghe Wu,Zheng Chen,Jinhao Huo,Yue Zhao,Lizhi Zhang,Jian Zhou

DOI: https://doi.org/10.1016/j.jcis.2020.11.122

IF: 9.9

2021-04-01

Journal of Colloid and Interface Science

Abstract:Dissipative particle dynamics (DPD) simulations was adopted to investigate the modification of polyvinylidene fluoride (PVDF) membrane by adding zwitterionic polymer brush poly (sulfobetaine methacrylate)- tetraethyl orthosilicate (PSBMA-TEOS) grafted silicon nanoparticles (SNPs) to the casting solution. The effects of polymer concentration and grafting architecture (PSBMA length and SNPs grafting ratio) on membrane morphology are discussed. When the polymer concentration reaches 40%, part of the SNPs is embedded in the membrane; the optimal polymer concentration is around 25-30%. In the SNPs system with the grafting ratio of 1, some SNPs are eluted into solution during phase separation. Compared with different grafting architectures, M8-5, M10-5 and M12-5 system (Mx-y, where x represents the length of the zwitterionic polymer brush and y represents the grafting ratio of the silica nanoparticles) exhibited stable membrane morphologies. This work can provide guidance for the design and modification of organic-inorganic composite membrane and help understand the distribution of modified materials on the membrane surface.

chemistry, physical
A molecular dynamic simulation method to elucidate the interaction mechanism of nano-SiO2 in polymer blends

Qinghua Wei,Yingfeng Zhang,Yanen Wang,Mingming Yang

DOI: https://doi.org/10.1007/s10853-017-1330-0

IF: 4.5

2017-07-21

Journal of Materials Science

Abstract:A molecular dynamics simulation is employed to investigate the effects of nano-SiO2 particles on the properties of polyvinyl alcohol (PVA)/poly(vinyl pyrrolidone) (PVP) blends and demonstrate the interaction mechanism of nano-SiO2 particles in blend systems. Six blend systems with different concentrations of SiO2 particles (0–12.8%) and two interfacial interaction models of polymers on the SiO2 surface were designed and analyzed in terms of density distribution, mechanical properties, fractional free volume, and X-ray diffraction patterns. The incorporation of nano-SiO2 particles into the PVA/PVP blend systems increased their mechanical properties, densities, and semicrystalline character. Density distribution analysis indicated PVA molecular chains are more easily adsorbed on the SiO2 surface than PVP molecular chains. Finally, an analysis of binding energies and pair correlation functions of interfacial interaction models revealed the interaction mechanism of nano-SiO2 particles in PVA/PVP systems. Hydrogen bond interactions between polar functional groups in polymer molecular chains and the hydroxyl groups of the SiO2 surface are involved in adsorption of the polymers on the SiO2 surface and explain why nano-SiO2 particles can significantly influence the properties of PVA/PVP systems.

materials science, multidisciplinary
Molecular Dynamics Insights into the Structural and Diffusive Properties of ZIF-8/PDMS Mixed Matrix Membranes in the N-Butanol/water Pervaporation Process

Tao Sun,Manquan Fang,Zhen Wu,Lixin Yu,Jiding Li

DOI: https://doi.org/10.1088/1361-651x/aa584f

IF: 2.421

2017-01-01

Modelling and Simulation in Materials Science and Engineering

Abstract:Molecular dynamics (MD) simulation was used to study the structural and diffusive properties of zeolitic imidazolate framework-8 (ZIF-8)/polydimethylsiloxane (PDMS), a novel alcohol-permselective mixed matrix membrane (MMM). Simulation models of one pure PDMS membrane and three ZIF-8/PDMS MMMs with increasing loadings were successfully constructed. Non-bond energy turned out to be a strong attractive interaction between the PDMS matrix and ZIF-8 cells. The morphology and mobility of PDMS chains were characterized by mean square displacement (MSD). The fraction of free volume (FFV) of the pure membrane and MMMs was calculated and showed declining trends with increasing ZIF-8 loadings. The diffusion coefficients of n-butanol and water molecules were calculated by the Einstein relation. Dn-butanol first increased then decreased, while D-water decreased with the increasing loadings. The mechanism of selective diffusion behaviour was investigated and it was found that the inner channels of ZIF-8 provided selective pathways for n-butanol. Diffusion coefficients were correlated with FFV and the results showed that the logarithm of D-water demonstrated a good linear relation with the inverse FFV and was in agreement with the free volume theory, while Dn-butanol showed a significant deviation in the case of MMM-1 due to the selective diffusion channels provided by ZIF-8.
Fluid simulation of different solvents and additives for the preparation of PVDF blended membranes by NIPS method

Li XinQing,Fang Ping,Liu Kang,Jiang YuMeng

DOI: https://doi.org/10.1007/s10965-024-04131-z

IF: 3.061

2024-09-15

Journal of Polymer Research

Abstract:Membrane separation technology is one of the most widely studied methods for wastewater treatment. This paper is based on the non-solvent-induced phase separation (NIPS) method, which is combined with phase-field simulation to develop a fluid model for the volume fraction of tetrameric polyvinylidene fluoride (PVDF).In this paper, DMSO, DMAc and DMF are used as solvents, and pure water is used as a gel bath to simulate the relevant parameters of PVDF membrane; and PVP and LiCl are used as additives, and DMF and DMAc are used as solvents for the two-by-two combinations, and by calculating the relevant parameters of the PVDF quaternary membrane system, comparing and verifying the simulation results through experiments. results show that: the different solvents on the PVDF membrane in the order of DMSO > DMAc > DMF; additive LiCl system, the polymer diffusion rate in the polymer solution layer are faster than the PVP system. However, the top layer of the polymer solution layer in the PVP system is relatively flat, while the top layer of the polymer solution layer in the additive LiCl system is more undulating or even broken, indicating that LiCl has a greater influence on the membrane than PVP.

polymer science
Two-Dimensional Atr-Ftir Spectroscopic Study on the Water Diffusion Behavior in Polyimide/Silica Nanocomposite

Yi Shen,Hai-tao Wang,Wei Zhong,Pei-yi Wu

DOI: https://doi.org/10.1360/cjcp2006.19(6).481.4

2006-01-01

Abstract:To consider the reliability and performance of electronic devices based on polyimide derivatives, dynamic water sorption and diffusion behavior in a polyimide derivative: poly (4'4-oxydiphenylene pyromellitimide) (PMDA-ODA)/silica nanocomposite was investigated by two-dimensional ATR-FTIR spectroscopy, by which three states of water molecules owning different H-bonding strength were distinguished. The amounts and strength of H-bonding also played a significant role in determining the diffusion rate of the different states of water molecules. The type of aggregated water molecules which also formed H-bonding with silicic acid (residues) or polyimide system was the last one diffusing to the polymer side in contact with the ATR crystal element because the polymeric matrix blocked their diffusion to a great extent. The diffusion coefficient was also estimated to gain the information of the dynamic diffusion behavior.
Dynamic Sorption and Transport of Water Vapor in Dense Polyimide Membranes

Chuyi Zeng,Jiding Li,Tianquan Chen,Jian Chen,Cuixian Chen

DOI: https://doi.org/10.1002/app.24265

IF: 3

2006-01-01

Journal of Applied Polymer Science

Abstract:Series of polyimide membranes were synthesized using varied monomers such as pyromellitic dianhydride, 3,3'4,4'-benzophenonetetracarboxylic dianhydride, 4,4'-diaminodiphenylether, 4,4-diaminodiphenylmethane, and phenylenediamine, and the properties of polyimide membranes were measured by experimental techniques. The dynamic sorption and transport processes of water vapor in those dense polyimide membranes were measured using computer on-line recorded gravimetric sorption method at 298.15 and 308.15 K. Modeling of these processes involved the total change of excess Gibbs free energy, which was considered as a sum of three parts calculated by the modified Scatchard-Hildebrand model, Flory-Huggins theory, and linear viscoelastic theory, respectively. The calculated results were in agreement with the experimental data and the maximal relative deviation was no more than 8.57% and the average relative deviation is 4.62%. The calculated results had also shown that this model describe not only Fickian diffusion but also non-Fickian very well. Furthermore, the influence of chemical structure, morphological structure, etc. of polyimide membranes on the water sorption concentration and water diffusion coefficient were interpreted by considering the experimental data and calculation results. (c) 2006 Wiley Periodicals, Inc.
Structural and Diffusion Properties of Water in Hydrophobic Micropores by Molecular Simulation

YC Liu,Q Wang,LH Lu,LZ Zhang

DOI: https://doi.org/10.3866/pku.whxb20050113

2005-01-01

Abstract:The structural and diffusion properties of water confined in hydrophobic micropores were studied by means of molecular dynamics (MD) simulations. The effects of pore width, temperature, and pressure on density distribution in the channel direction and on self-diffusion coefficient were investigated and analyzed, and the radial distribution functions of water in micropores at different temperatures were calculated. In small-size micropores, the distribution of water molecules along the channel direction becomes very inhomogeneous as the temperature decreases, which leads to gas-liquid phase separation. The diffusivity in the direction parrallel with the channel is generally 4 similar to 5 times larger than those in the direction perpendicular to the channel. Finally, a model was proposed to describe the diffusivity of water in micropores as a function of temperature and density.
Study of the Dissolution and Diffusion of Propane, Propylene and Nitrogen in Polydimethylsiloxane Membranes with Molecular Dynamics Simulation and Monte Carlo Simulation

Weibin Cai,Mingqian Wang,Gary Q. Yang,Zhijun Zhang,Yujun Wang,Jiding Li

DOI: https://doi.org/10.3390/separations9050116

2022-05-10

Separations

Abstract:Volatile organic compounds (VOCs) are important sources of atmospheric pollutants on account of their high recycling value. The membrane of dense silicone rubber polydimethylsiloxane (PDMS) has wide-ranging prospects for the separation and recovery of VOCs. In this study, PDMS membrane body models were established in BIOVIA Materials Studio (MS) to simulate VOCs with C3/N2 gases, and to study the structure of PDMS membranes and the dissolution and diffusion process of gas in the membranes. The free volume fraction (FFV), cohesive energy density (CED), radial distribution function (RDF), diffusion coefficient and solubility coefficient of C3H8, C3H6 and N2 in PDMS membranes were calculated, and the permeability coefficients were calculated according to these values. At the same time, the effects of temperature and mixed gas on the dissolution and diffusion of C3/N2 in PDMS membranes were investigated. The results show that the mass transfer process of C3 in PDMS membranes is mainly controlled by the dissolution process, while that of N2 is mainly controlled by the diffusion process. In a C3/N2 mixed gas system, there is a synergistic relationship between gases in the diffusion process, while there is competitive adsorption in the dissolution process. With an increase in temperature, the diffusion coefficients of the three gases in PDMS gradually increase, the solubility coefficients gradually decrease, and the overall permeability selectivity coefficients of the gases gradually decrease. Therefore, low-temperature conditions are more conducive to the separation of C3/N2 in PDMS membranes. The simulation results of the permeability selectivity coefficients of pure C3 and N2 in PDMS are similar to the experimental results, and the relationship between the micro- and macro-transport properties of PDMS membranes can be better understood through molecular simulation.

chemistry, analytical

Molecular Dynamics Simulation of the Diffusion Behavior of Water in Poly(Vinylidene Fluoride)/Silica Hybrid Membranes

Atomistic Simulations of Biofouling and Molecular Transfer of a Cross-linked Aromatic Polyamide Membrane for Desalination

Solvent Diffusion in Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres by Pulsed Field Gradient Nmr Techniques

Influence of Solvents on the PVDF Membrane Properties

Methanol distribution and electroosmotic drag in hydrated poly(perfluorosulfonic) acid membrane.

Molecular Dynamics Simulations of Electroosmosis in Perfluorosulfonic Acid Polymer

Impact of SiO2 doping on the structure and oil–water separation properties of a PVDF membrane: insights from molecular dynamics simulation

Molecular dynamics simulation of the transport of H 2 , O 2 , Ar , CH 4 and nC 4 H 10 in composite poly ( 4-methyl-2-pentyne ) and nanoparticle of cristobalite silica and faujasite

Effect of Coagulation Bath Temperature on Formation Mechanism of Poly(vinylidene Fluoride) Membrane

Insight of organic molecule dissolution and diffusion in cross-linked polydimethylsiloxane using molecular simulation

Molecular Dynamics Simulation of Water Diffusion in Liquid Silicone Rubber

Molecular Dynamics Simulations of Water Structure and Diffusion in a 1 nm Diameter Silica Nanopore as a Function of Surface Charge and Alkali Metal Counterion Identity

Computer simulation of zwitterionic polymer brush grafted silica nanoparticles to modify polyvinylidene fluoride membrane

A molecular dynamic simulation method to elucidate the interaction mechanism of nano-SiO2 in polymer blends

Molecular Dynamics Insights into the Structural and Diffusive Properties of ZIF-8/PDMS Mixed Matrix Membranes in the N-Butanol/water Pervaporation Process

Fluid simulation of different solvents and additives for the preparation of PVDF blended membranes by NIPS method

Two-Dimensional Atr-Ftir Spectroscopic Study on the Water Diffusion Behavior in Polyimide/Silica Nanocomposite

Dynamic Sorption and Transport of Water Vapor in Dense Polyimide Membranes

Structural and Diffusion Properties of Water in Hydrophobic Micropores by Molecular Simulation

Study of the Dissolution and Diffusion of Propane, Propylene and Nitrogen in Polydimethylsiloxane Membranes with Molecular Dynamics Simulation and Monte Carlo Simulation