Modeling and Simulation of High-Density Photonic Integrated Circuits

chenglin xu,kai jiang,dong zhou,ningning feng,weiping huang

DOI: https://doi.org/10.1364/ipra.2005.ime1

2005-01-01

Abstract:Mathematical models and simulation techniques for modeling and simulation of complex photonic devices and integrated circuits made of high index contrast materials and structures are reviewed and discussed.

What problem does this paper attempt to address?

Scalability of Large-Scale Photonic Integrated Circuits

Yikai Su,Yu He,Xuhan Guo,Weiqiang Xie,Xingchen Ji,Hongwei Wang,Xinlun Cai,Limin Tong,Siyuan Yu

DOI: https://doi.org/10.1021/acsphotonics.2c01529

IF: 7

2023-01-01

ACS Photonics

Abstract:To keep up with the growing bandwidth demands, photonic integrated circuits (PICs) have been widely employed in various application scenarios where high capacity and high-bandwidth density interconnects are required. However, it is challenging to scale the PICs toward future petabit per second capacity requirements. We study the scalability bottlenecks of PICs in terms of guiding materials, dense integration approaches, wide-band optical sources, and high efficiency tunable and modulation devices. We also look for possible solutions to address these challenges. In the end, we provide a perspective on future PIC development. Moore's law for integrated photonics may last for a much shorter time than that in the microelectronics industry, requiring significant innovations and technological breakthroughs in PIC research.
Coupled Optical and Electronic Simulations of Electrically Pumped Photonic-Crystal-Based Leds

G Veronis,Y Liu,W Suh,MH Han,Z Wang,RW Dutton,SH Fan

DOI: https://doi.org/10.1117/12.590899

IF: 2.877

2005-01-01

Journal of Applied Physics

Abstract:We use coupled optical and electronic simulations to investigate design tradeoffs in electrically pumped photonic crystal light emitting diodes. A finite-difference frequency-domain electromagnetic solver is used to calculate the spontaneous emission enhancement factor and the extraction efficiency as a function of frequency and of position of the emitting source. The calculated enhancement factor is fed into an electronic simulator, which solves the Coupled continuity equations for electrons and holes and Poisson's equation. We simulate a two-dimensional structure consisting of a photonic-crystal slab with a single-defect cavity. and investigate different pumping configurations for such a cavity.
Modeling and Simulation of Nano-Interconnects for Nanophotonics

irfan ahmed,hongson chu,w b ewe,erping li,zhizhang chen

DOI: https://doi.org/10.1109/EPTC.2007.4469845

2007-01-01

Abstract:In this paper we model and simulate some nano-interconects for nanophotonics. Both frequency- and time-domain methods are used for their analyses. Different cases are considered for nano-interconnects, including the nanostrips and coupled nanowires. It is observed that these structures guide the signals to the desired positions effectively at nano scale level.
Modeling And Analysis Of Silicon-On-Insulator Elliptical Microring Resonators For Future High-Density Integrated Photonic Circuits

Kang Xiong,Xi Xiao,Ying-Tao Hu,Zhi-Yong Li,Tao Chu,Yu-De Yu,Jin-Zhong Yu

DOI: https://doi.org/10.1088/1674-1056/21/7/074203

2012-01-01

Abstract:We propose a novel resonator containing an elliptical microring based on a silicon-on-insulator platform. Simulations using the three-dimensional finite-difference time-domain method show that the novel elliptical microring can efficiently enhance the mode coupling between straight bus waveguides and resonator waveguides or between adjacent resonators while preserving relatively high intrinsic quality factors with large free spectral range. The proposed resonator would be an alternative choice for future high-density integrated photonic circuits.
Simulation of Massless Dirac Dynamics in Plasmonic Waveguide Arrays

Beibei Xu,Tao Li,Shining Zhu

DOI: https://doi.org/10.1364/oe.26.013416

IF: 3.8

2018-01-01

Optics Express

Abstract:The recent simulation of quantum behavior in condensed matter physics by well-designed photonic structures has opened unprecedented opportunities to steer the flow of light in novel manners. Here, we propose a design to simulate massless Dirac dynamics in evanescently coupled plasmonic ridge waveguide arrays with alternating positive and negative coupling coefficients. The coupling coefficients are carefully tailored by adjusting the geometric parameters of the waveguide in arrays, which are supposed to be feasible with advanced nanofabrication techniques. Further theoretical studies are also carried out based on the coupled mode theory to discuss the influence of excitation condition on beam propagation in this massless Dirac dynamics simulation case.
Modeling and Characterization of On‐Chip Interconnects

wenyan yin,wensheng zhao

DOI: https://doi.org/10.1002/047134608X.W8196

2013-01-01

Abstract:Abstract： In this article, one distributed circuit model for the on-chip single interconnect will be introduced at first, where all the lumped elements are frequency-independent and can be directly obtained from its geometrical and physical parameters. This ensures proper scalability of the model parameters because no optimization tuning or fitting for them is involved. Some popular and low-cost techniques, such as patterned ground shield (PGS) structures for suppressing the substrate loss of silicon substrate at high frequencies and differential signal transmission are also addressed here. Then, electromagnetic modeling of on-chip coupled (a)symmetrical interconnects will be performed, including all distributed parameters. The average power handling capability (APHC) of on-chip interconnects and even thin-film microstrip lines (TFML) are also addressed here. Finally, the electrothermal analysis of multilevel interconnects under electrostatic discharge (ESD) stress will be reported using the time-domain FEM.
Finite-Element-Based Generalized Impedance Boundary Condition for Modeling Plasmonic Nanostructures

Shiquan He,Wei E. I. Sha,Lijun Jiang,Wallace C. H. Choy,Weng Cho Chew,Zaiping Nie

DOI: https://doi.org/10.1109/tnano.2011.2171987

2012-01-01

IEEE Transactions on Nanotechnology

Abstract:The superior ability of plasmonic structures to manipulate light has propelled their extensive applications in nanophotonics techniques and devices. Computational electromagnetics plays a critical role in characterizing and optimizing the nanometallic structures. In this paper, a general numerical algorithm, which is different from the commonly used discrete dipole approximation, the finite-difference time-domain, and the surface integral equation (SIE) method, is proposed to model plasmonic nanostructures. In this algorithm, the generalized impedance boundary condition (GIBC) based on the finite element method (FEM) is formulated and converted to the SIE. The plasmonic nanostructures with arbitrary inhomogeneity and shapes are modeled by the FEM. Their complex electromagnetic interactions are accurately described by the SIE method. As a result, the near field of plasmonic nanostructures can be accurately calculated. The higher order basis functions, together with the multifrontal massively parallel sparse direct solver, are involved to provide a higher order accurate and fast solver.
Modeling and Simulation of Active Plasmonics with the FDTD Method by Using Solid State and Lorentz–Drude Dispersive Model

Iftikhar Ahmed,Eng Huat Khoo,Oka Kurniawan,Er Ping Li

DOI: https://doi.org/10.1364/josab.28.000352

2011-01-01

Abstract:An approach for the simulation of active plasmonics devices is presented in this paper. In the proposed approach, a multilevel multielectron quantum model is applied to the solid state part of a structure, where the electron dynamics are governed by the Pauli exclusion principle, state filling, and dynamical Fermi-Dirac thermalization, while for the metallic part, the Lorentz-Drude dispersive model is incorporated into Maxwell's equations. The finite difference time domain method is applied to the resulting equations. For numerical results, the developed methodology is applied to a metal-semiconductor-metal plasmonic waveguide and a microcavity resonator. (C) 2011 Optical Society of America
Simulation approach of hybrid optical-electrical on-chip interconnects for multicore systems

Ji-yang YU,Peng LIU,Xing-cheng HUA,Xiang MA,Jian-yi YANG

DOI: https://doi.org/10.3785/j.issn.1008-973X.2015.11.025

2015-01-01

Abstract:A simulation approach of optical-electrical interconnects for multicore systems was proposed to address the accuracy of simulation for optical-electrical on-chip interconnects of multicore systems,to support the system simulation,and to study and evaluate hybrid optical-electrical on-chip interconnects and microarchitectures.The optical devices and electrical devices were accurately modeled,and the device library worked cooperatively with the functional model.timing model,and cost model.A cycle-synchronization mechanism was employed to achieve cycle-accurate simulation for optical-electrical on-chip interconnects.A multithreading mechanism was implemented to extend the simulation scale from 16-node to 256-node.The experimental results show that the proposed simulation approach can analyze the network performance of 256-node systems,in terms of network power consumption and latency.The cross-layer simulation solution can explore the design space of optical-electrical on-chip networks architecture.
3D Modeling of Photonic Devices Using Dynamic Thermal Electron Quantum Medium Finite-Different Time-Domain (Dteqm-Fdtd) Method

E. H. Khoo,S. T. Ho,I. Ahmed,E. P. Li,Y. Y. Huang

DOI: https://doi.org/10.1109/omems.2008.4607863

2008-01-01

Abstract:This paper reports on the modeling of the semiconductor photonic devices using 3D DTEQM-FDTD. The model includes the physics of Pauli Exclusion principle, Fermi-Dirac thermalization and state filling to describe the complex electron dynamics in semiconductor media to realize the full potential of FDTD. The carrier intraband and interband transition dynamics, energy band filling and thermal equilibrium are demonstrated in the model. The DTEQM-FDTD model includes the essential physics of complex dynamical media and yet computational efficient. It is applicable to a wide range of atomic and molecular media by applying the appropriate rate equations and energy level structure.
Multiphysics modeling of plasmonic nanodevices

erping li,ping bai,iftikhar ahmed,hong son chu

DOI: https://doi.org/10.1109/URSIGASS.2011.6050392

2011-01-01

Abstract:Plasmonic devices are modeled and simulated by incorporating a Lorentz-Drude model for the metallic materials and a multi-level multi-electron quantum model for the semiconductor materials into Maxwell's equations. Some novel plasmonic devices such as a detector consisting of a dipole nanoantenna and a metal-semiconductor-metal detector, and a ring resonator based on a hybrid dielectric loaded waveguide are investigated with developed multiphysics modeling method. Simulation results show that the devices are very promising and can be combined with nanoelectronic integrated circuits to further improve their performance.
Silicon Photonic Network-on-chip and Enabling Components

Ting Hu,Chen Qiu,Ping Yu,LongZhi Yang,WanJun Wang,XiaoQing Jiang,Mei Yang,Lei Zhang,JianYi Yang

DOI: https://doi.org/10.1007/s11431-012-5112-2

2013-01-01

Abstract:As the transistor’s feature scales down and the integration density of the monolithic circuit increases continuously,the traditional metal interconnects face significant performance limitation to meet the stringent demands of high-speed,low-power and low-latency data transmission for on-and off-chip communications.Optical technology is poised to resolve these problems.Due to the complementary metal-oxide-semiconductor（CMOS） compatible process,silicon photonics is the leading candidate technology.Silicon photonic devices and networks have been improved dramatically in recent years,with a notable increase in bandwidth from the megahertz to the multi-gigahertz regime in just over half a decade.This paper reviews the recent developments in silicon photonics for optical interconnects and summarizes the work of our laboratory in this research field.
Characteristics Modeling of Photonic Crystal by Using Numerical Techniques

S Yan,WL Yuan,YJ Zhang,EP Li,MS Leong

DOI: https://doi.org/10.1109/apace.2003.1234456

2003-01-01

Abstract:Photonic band-gap (PBG) materials are periodic dielectric crystals that exhibit a photonic band-gap analogous to the electronic band-gap present in semiconductors. Their fabrication, however, requires extremely high resolution and is very costly. Due to the high expense in experimental fabrication, accurate modeling and prediction of a novel PBG structure characteristics are highly desirable. This paper presents an investigation on the effects of dielectric material properties and structures on the photonic band characteristics by using numerical simulation approaches.
Time-domain Simulation for Plasmonic Devices

Er‐Ping Li,Hong‐Son Chu

DOI: https://doi.org/10.1017/cbo9781139208802.005

2014-01-01

Abstract:In this chapter, the finite-difference time-domain method (FDTD) is developed and implemented for the modeling and simulation of passive and active plasmonic devices. For the simulation of passive devices, the Lorentz–Drude (LD) dispersive model is incorporated into the time-dependent Maxwell equations. For the simulation of active plasmonics, a hybrid approach, which combines the multilevel multi-electron quantum model (to simulate the solid state part of a structure) and the LD dispersive model (to simulate the metallic part of the structure), is used. In addition, the multilevel multi-electron quantum mode (solid-state model) is modified to simulate the semiconductor plasmonics. For numerical results, the methodologies developed here are applied to simulate nanoparticles, metal–semiconductor–metal (MSM) waveguides, microcavity resonators, spasers, and surface plasmon polariton (SPP) extraction from spaser. To enhance the simulation speed, graphics processing units (GPUs) are used for the computation, and, as an example, an application of a passive plasmonic device is examined.
LioeSim: A Network Simulator for Hybrid Opto-Electronic Networks-on-Chip Analysis

xiang ma,jiyang yu,xingcheng hua,chao wei,yi huang,longzhi yang,defeng li,qinfen hao,peng liu,xiaoqing jiang,jianyi yang

DOI: https://doi.org/10.1109/JLT.2014.2356515

2014-01-01

Abstract:The development of nanophotonics in the last decades indicates a good opportunity for constructing the opto-electronic networks on chip. Hybrid opto-electronic network-on-chip (HNoC) is an emerging communication architecture that can offer high bandwidth and low latency to many-core systems-on-chip. Photonic devices are fundamentally different from conventional electronic devices so that new modeling and analysis methods are urgently needed in order to analyze both physical-level and system-level performances of HNoCs. In this paper, we introduce LioeSim, a network simulator for HNoCs analysis that incorporates an accurate parameterized all-round photonic device library. We also describe how to construct mesh-based HNoCs with the fundamental mesh-based topology inside LioeSim. To demonstrate the diverse capabilities of LioeSim, we perform some case studies of clustered mesh-based HNoCs and two typical HNoCs with optical bus by illustrating the comparisons with latency, power consumptions, and efficiency.
Integrated System-Level Electronic Design Automation (EDA) for Designing Plasmonic Nanocircuits

Hongson Chu,Oka Kurniawan,Wenzu Zhang,Dongying Li,Erping Li

DOI: https://doi.org/10.1109/TNANO.2012.2194507

2012-01-01

IEEE Transactions on Nanotechnology

Abstract:This paper proposes a system-level circuit simulation framework for nanoplasmonic devices, and presents an example of the simulation of a plasmonic nanocircuit. The electronic design automation environment provides an equivalent circuit model library for several plasmonic metal-insulator-metal-based devices. The accuracy of the equivalent models for the plasmonic nanocircuit library is verified by using full-wave simulations and analytical equations. These models are then used to design an ultracompact Mach–Zehnder plasmonic modulator. It is shown that the voltage required to achieve a π phase shift V $_\\pi$ in the modulator can be predicted by the simulator with reasonable accuracy. The optimized design of the modulator is also presented that reduces the value of V $_\\pi$ according to the required specification.
Photonic Integrated Circuits with Bound States in the Continuum

Z. E. J. I. E. YU,X. I. A. N. G. XI,J. I. N. G. W. E. N. MA,H. O. N. K. I. TSANG,CHANG-LING ZOU,X. I. A. N. K. A. I. SUN

DOI: https://doi.org/10.1364/optica.6.001342

IF: 10.4

2019-01-01

Optica

Abstract:We experimentally demonstrated photonic integrated circuits with bound states in the continuum by patterning low-refractive-index waveguides on a high-refractive-index substrate. We also demonstrated high-Q microcavities, directional couplers, and electro-optic modulators working under this principle.
EPHIC Models: General SPICE Photonic Models for Closed-Loop Electronic-Photonic Co-Simulation

Da Ming,Yuhang Wang,Zhicheng Wang,Ken Xingze Wang,Ciyuan Qiu,Min Tan

DOI: https://doi.org/10.1109/tcsi.2024.3353459

2024-01-01

Abstract:This paper presents general SPICE photonic models for closed-loop electronic-photonic co-simulation. SPICE models are originally intended for electronic devices, which have significantly different physics compared to photonic devices. Most existing SPICE photonic models are specialized and fail to capture important features like multi-dimensional signals. It remains a key challenge to represent general photonic devices using SPICE models that include their essential features. To address the above challenge, we separate the signal meaning from its numerical result and adopt a numerically-equivalent approach to construct photonic models using native SPICE primitives. And the designer is left to interpret the meaning of the numerically-equivalent electronic signals, such as wavelength and polarization. Our models encompass the features of existing SPICE models, including wavelength dependence and bi-directional transmission, as well as new features beyond those. Specifically, polarization, optical Kerr effect, two-photon absorption, free carrier absorption, and free carrier dispersion are included in our SPICE models. Closed-loop polarization simulation is realized for the first time. We can quickly achieve frequency-domain simulation by DC sweep instead of stepped frequency transient simulations or frequency chirp-based methods. Our SPICE photonic models show excellent agreement with the simulation results of Verilog-A models and Lumerical models. Our SPICE photonic models are more efficient in co-simulation with SPICE electronic models than Verilog-A photonic models due to less compiling time and better compatibility. Our general models make the circuit design of electronics-photonics convergence (EPC) as convenient as that of traditional integrated circuits, paving the way for the circuit-level convergence of electronics and photonics.

engineering, electrical & electronic
Simulation of Plasmonics Nanodevices with Coupled Maxwell and Schrödinger Equations Using the FDTD Method

Iftikhar Ahmed,Erping Li

DOI: https://doi.org/10.7716/aem.v1i1.40

2012-01-01

Advanced Electromagnetics

Abstract:Maxwell and Schrödinger equations are coupled to incorporate quantum effects for the simulation of plasmonics nanodevices. Maxwell equations with Lorentz-Drude (LD) dispersive model are applied to large size plasmonics components, whereas coupled Maxwell and Schrödinger equations are applied to components where quantum effects are needed. The finite difference time domain method (FDTD) is applied to simulate these coupled equations.
Research Progress of Integrated Photonic Quantum Simulation

Chen Yang,Zhang Tian-Yang,Guo Guang-Can,Ren Xi-Feng

DOI: https://doi.org/10.7498/aps.71.20221938

IF: 0.906

2022-01-01

Acta Physica Sinica

Abstract:Quantum simulation is to use a controllable quantum system to simulate other complicated or hard-to-control quantum system, and to deal with some complex unknown quantum systems that cannot be simulated on classical computers due to the exponential explosion of the Hilbert space. Among different kinds of physical realizations of quantum simulation, integrated optical systems have emerged as an appropriate platform in recent years due to the advantages of flexible control, weak decoherence, and no interaction in optical systems. In this review, we attempt to introduce some of the basic models used for quantum simulation in integrated photonic systems. This review article is organized as follows. In Section 2, we introduce the commonly used material platforms for integrated quantum simulation, including the silicon-based, lithium niobate-based integrated circuits, and the femtosecond laser direct writing optical waveguides. Several integrated optical platforms such as the coupled waveguide arrays, photonic crystals, coupled resonator arrays, and multiport interferometers are also introduced. In Section 3, we focus on the analog quantum simulations in the integrated photonic platform, including Anderson localization of light in disordered systems, various kinds of topological insulators, nonlinear and non-Hermitian systems. More specifically, in Subsection 3.1, we present the integrated photonic realizations of disordered and quasi-periodic systems. In Subsection 3.2, we review the integrated photonic realizations of the topological insulators with and without time-reversal symmetry, including Floquet topological insulators, quantum spin hall system, anomalous quantum hall system, valley hall system, Su-Schrieffer-Heeger (SSH) model, and photonic topological Anderson insulators. Besides, topological insulator lasers and topologically protected quantum photon sources are briefly reviewed. In Subsection 3.3, we review the nonlinear and non-Hermitian integrated optical systems. In Section 4 we present the integrated digital quantum simulations based on the multiport interferometers, including the discrete-time quantum random walk, Boson sampling, and molecular simulation. In Section 5, we summarize the content of the article and present the outlook on the future perspectives of the integrated photonic quantum simulation. We believe that the integrated photonic platforms will continue to provide an excellent platform for quantum simulation. More practical applications will be found based on this system through combining the fields of topological photonics, laser technologies, quantum information, nonlinear and non-Hermitian physics.

Modeling and Simulation of High-Density Photonic Integrated Circuits

Scalability of Large-Scale Photonic Integrated Circuits

Coupled Optical and Electronic Simulations of Electrically Pumped Photonic-Crystal-Based Leds

Modeling and Simulation of Nano-Interconnects for Nanophotonics

Modeling And Analysis Of Silicon-On-Insulator Elliptical Microring Resonators For Future High-Density Integrated Photonic Circuits

Simulation of Massless Dirac Dynamics in Plasmonic Waveguide Arrays

Modeling and Characterization of On‐Chip Interconnects

Finite-Element-Based Generalized Impedance Boundary Condition for Modeling Plasmonic Nanostructures

Modeling and Simulation of Active Plasmonics with the FDTD Method by Using Solid State and Lorentz–Drude Dispersive Model

Simulation approach of hybrid optical-electrical on-chip interconnects for multicore systems

3D Modeling of Photonic Devices Using Dynamic Thermal Electron Quantum Medium Finite-Different Time-Domain (Dteqm-Fdtd) Method

Multiphysics modeling of plasmonic nanodevices

Silicon Photonic Network-on-chip and Enabling Components

Characteristics Modeling of Photonic Crystal by Using Numerical Techniques

Time-domain Simulation for Plasmonic Devices

LioeSim: A Network Simulator for Hybrid Opto-Electronic Networks-on-Chip Analysis

Integrated System-Level Electronic Design Automation (EDA) for Designing Plasmonic Nanocircuits

Photonic Integrated Circuits with Bound States in the Continuum

EPHIC Models: General SPICE Photonic Models for Closed-Loop Electronic-Photonic Co-Simulation

Simulation of Plasmonics Nanodevices with Coupled Maxwell and Schrödinger Equations Using the FDTD Method

Research Progress of Integrated Photonic Quantum Simulation