Abstract:The effect of nonspherical (i.e. cylindrical) bomb geometry on the evolution Of Outwardly propagating flames and the determination of laminar flame speeds using the conventional constant-pressure technique is investigated experimentally and theoretically. The cylindrical chamber boundary modifies the propagation rate through the interaction of the wall with the flow induced by thermal expansion across the flame (even with constant pressure), which leads to significant distortion of the flame surface for large flame radii. These departures from the unconfined case, especially the resulting nonzero burned gas velocities, can lead to significant errors in flame speeds calculated using the conventional assumptions, especially for large flame radii. For example, at a flame radius of 0.5 times the wall radius, the flame speed Calculated neglecting confinement: effects can be low by similar to 15% (even with constant pressure). A methodology to estimate the effect of nonzero burned gas velocities on the measured flame speed in cylindrical chambers is presented. Modeling and experiments indicate that the effect of confinement can be neglected for flame radii less than 0.3 times the wall radius while still achieving acceptable accuracy (within 3%). The methodology is applied to correct the flame speed for nonzero burned gas speeds, in order to extend the range of flame radii useful for flame speed measurements. Under the proposed scaling, the burned gas speed can be well approximated as a function of only flame radius for a given chamber geometry - i.e. the correction function need only be determined once for an apparatus and then it can be used for any mixture. Results indicate that the flow correction can be used to extract flame speeds for flame radii tip to 0.5 times the wall radius with somewhat larger, yet still acceptable uncertainties for the cases Studied. Flow-corrected burning velocities are measured for hydrogen and syngas mixtures at atmospheric and elevated pressures. Flow-corrected flame speeds in the small cylindrical chamber used here agree well with previously reported flame speeds from large spherical chambers. Previous papers presenting burning velocities from cylindrical chambers report performing data analysis on flame radii less than 0.5 or 0.6 times the wall radius, where the flame speed calculated neglecting confinement effects may be low by similar to 15 or 20%, respectively. For cylindrical chambers, data analysis should be restricted to flame radii less than 0.3 times the wall radius or a flow correction should be employed to account for the burned gas motions. With regard to the design of future vessels, larger vessels that minimize the flow aberrations for the same flame radius are preferred. Larger vessels maximize the relatively unaffected region of data allowing for a more straightforward approach to interpret the experimental data. (c) 2009 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

On the Accurate Determination of Flame Speeds at Normal and Elevated Pressures by Using a Spherical Bomb: the Effects of Compression and Stretch

Effects of Compression and Stretch on the Determination of Laminar Flame Speeds Using Propagating Spherical Flames

Experimental Investigation of the Flame Front Propagation Characteristic During Light-round Ignition in an Annular Combustor

Studies of Radiation Absorption on Flame Speed and Flammability Limit of CO2 Diluted Methane Flames at Elevated Pressures

A study of propagation of spherically expanding flames at low pressure using direct measurements and numerical simulations

Development of an Optically Accessible Apparatus to Characterize the Evolution of Spherically Expanding Flames under Constant Volume Conditions

On the accuracy of laminar flame speeds measured from outwardly propagating spherical flames: Methane/air at normal temperature and pressure

Nonlinear Effects in the Extraction of Laminar Flame Speeds from Expanding Spherical Flames

Effects of Radiation on the Uncertainty of Flame Speed Determination Using Spherically Propagating Flames with CO/CO2/H2O Dilutions at Elevated Pressures

Radiation-induced Uncertainty in Laminar Flame Speed Measured from Propagating Spherical Flames

On the Extraction of Laminar Flame Speed and Markstein Length from Outwardly Propagating Spherical Flames

On the uncertainty of extrapolation of laminar flame speed and markstein length from expanding spherical flames

Tailored Mixture Properties for Accurate Laminar Flame Speed Measurement from Spherically Expanding Flames: Application to H2/O2/N<…

Effect of Cylindrical Confinement on the Determination of Laminar Flame Speeds Using Outwardly Propagating Flames

Numerical Studies on the Ignition and Propagation for Spherically Expanding Premixed Cool Flames under Gravitational Conditions

Effects of radiation and compression on propagating spherical flames of methane/air mixtures near the lean flammability limit

Optimizing Mixture Properties for Accurate Laminar Flame Speed Measurement from Spherically Expanding Flame: Application to H2/O2/N2/He Mixtures

Effects of radiation absorption on spherical flame propagation and radiation-induced uncertainty in laminar flame speed measurement

Studies of the dynamics of autoignition assisted outwardly propagating spherical cool and double flames under shock-tube conditions

Experimental and Numerical Studies of Spectral Radiation Reabsorption on CO2 Diluted Flames

The effect of finite molecular volume on the propagation of unsteady spherical flame front