Abstract:The uncertainty on the laminar flame speed extracted from spherically expanding flames can be minimized by using large flame radius data for the extrapolation to zero stretch-rate. However, at large radii, the hydrodynamic and thermo-diffusive instabilities would induce the wrinkling of the flame surface and limit the range of usable data. In the present study, we have employed the flame stability theory of Matalon to tailor the properties of the initial mixture so that onset of cellular flame would occur at a pre-determined, large radius. This approach was employed to measure the laminar flame speeds of H2/O2/N2/He mixtures with equivalence ratios from 0.6 to 2.0, at pressures of 50/80/100 kPa and initial temperature of 300 K. For most experiments we performed, the uncertainty related to the extrapolation to zero stretch-rate (performed with the linear curvature model) was below 2% as shown by the position of the data points in the (Lb/Rf,U, Lb/Rf,L) plan, where Lb is the burned Markstein length; and Rf,L and Rf,U are the flame radii at the lower and upper bounds of the extrapolation range. Unsteady 1-D simulations using four chemical mechanisms were performed to show that unstretched laminar flame speed can be well-characterized with relative error below 10% for most conditions. The flame dynamical response to stretch rate could be captured by the mechanisms only under some conditions. Further analyses on critical flame radius were carried out: (i) the dominant parameters were identified based on a local sensitivity analysis; and (ii) the uncertainty on the predicted critical radius was determined through an uncertainty propagation approach. Uncertainty in critical flame radius calculation comes mostly from the uncertainty on fundamental transport and kinetic data. The present work indicates that although the stability theory of Matalon provides a well defined framework to tailor the mixture properties for improved flame speed measurement, the inaccuracy of some of the required parameters can result in significantly over-estimated critical radius for cellular flame onset which compromises the accuracy of the tailoring procedure.

On the uncertainty of extrapolation of laminar flame speed and markstein length from expanding spherical flames

Uncertainty in Stretch Extrapolation of Laminar Flame Speed from Expanding Spherical Flames

Uncertainty Reduction in Laminar Flame Speed Extrapolation for Expanding Spherical Flames

Extrapolation of Laminar Flame Speeds from Stretched Flames: Role of Finite Flame Thickness

Extrapolations of Laminar Flame Speeds from Expanding Spherical Flames Based on the Finite-Structure Stretched Flames

Numerical Study of Synthetic Spherically Expanding Flames for Optimization of Laminar Flame Speed Experiments

On the Extraction of Laminar Flame Speed and Markstein Length from Outwardly Propagating Spherical Flames

Propagation of Expanding Ellipsoid-Shaped Flame

Non-linear Extrapolation of Laminar Flame Properties from Spherically Expanding Flames

Nonlinear Effects in the Extraction of Laminar Flame Speeds from Expanding Spherical Flames

Tailored Mixture Properties for Accurate Laminar Flame Speed Measurement from Spherically Expanding Flames: Application to H2/O2/N<…

Extrapolation and DNS-mapping in Determining Laminar Flame Speeds of Syngas/air Mixtures

Optimizing Mixture Properties for Accurate Laminar Flame Speed Measurement from Spherically Expanding Flame: Application to H2/O2/N2/He Mixtures

On the accuracy of laminar flame speeds measured from outwardly propagating spherical flames: Methane/air at normal temperature and pressure

Extrapolation of Laminar Ethylene/Air Flame Speeds at Elevated Pressures with Flame Chemistry Analysis

Generalized description and extrapolation of extinction stretch rates from spherically expanding flames

Effects of Compression and Stretch on the Determination of Laminar Flame Speeds Using Propagating Spherical Flames

Effects of Lewis number and ignition energy on the determination of laminar flame speed using propagating spherical flames

Determination of Burning Velocities from Spherically Expanding H 2 /air Flames

Radiation-induced Uncertainty in Laminar Flame Speed Measured from Propagating Spherical Flames

Reassessing the 2-D velocity boundary effect on the determination of extinction stretch rate and laminar flame speed using the counterflow flame configuration