Abstract:In recent years, coal and biomass synthetic natural gas have become a hot issue. The traditional natural gas synthesis route is based on the conversion of carbon raw materials, through the catalytic conversion reaction of methanation, to synthesize natural gas. Among all the active components of methanation catalysts, nickel-based catalysts have been widely used for their high reactivity, methane selectivity and low cost. However, nickel-based catalysts are prone to form nickel carbonyl at low temperature (200-300 degrees C) and low hydrogen-carbon ratio, which results in nickel particle sintering. It is possible to produce high molecular carbon at 500 degrees centigrade and decrease in activity at 500 degree Celsius. This may be due to the thermal sintering of the carrier, the formation of carbon deposition, or the growth of nickel crystals due to the migration and reduction of particles. In order to further improve the high temperature stability and sulfur tolerance of the catalyst, a series of xNi/TiO2 and 20Ni/xMn-TiO2 catalyst were prepared by impregnation method and the effect of Ni and Mn loading on the catalytic performance for CO Methanation was studied respectively. XRD, SEM, TG/DTG and evaluation of activity were used to examine the catalysts. A fixed bed tubular reactor is used as the catalyst evaluation device. The reactor was heated in three stages. The bed temperature was measured by a thermocouple extending into the bed. Spectrometer (Agilent-GC7890B) analysis, thermal conductivity tank detector (TCD) analysis of CH4, CO2, CO, H-2. Hydrogen flame ionization detector (FID) was used to analyze other alkanes in the product. The activity of the catalyst was evaluated and characterized by XRD, SEM and TG/DTG. The results show that the activity of 20Ni/TiO2 is the highest, up to 99%, in the xNi/TiO2, while the Ni loading affect xNi/TiO2 activity is not the main factor; With 20 Ni/TiO2 catalysts for the further study, add Mn in the xNi/TiO2 catalyst will improve its CH4 selectivity and temperature interval. Characterization analysis found that adding Mn will increase the degree of dispersion of active components. The reduction method and temperature test of 20Ni/8Mn-TiO2 shows that the catalyst reduced under 400 degrees C TPR performance better.

Doping Effects of Manganese on the Catalytic Performance and Structure of NiMgO Catalysts for Controllabe Synthesis of Multi-Walled Carbon Nanotubes

Synthesis of Multi-Walled Carbon Nanotubes Using Comnmgo Catalysts Through Catalytic Chemical Vapor Deposition

Bismuth-doped Manganese Molybdenum Bimetallic Oxide Nanorods As a Highly Efficient Nitrogen Reduction Catalyst

Promoting effects of chromium on Ni/MgO catalysts for CNTs synthesis by chemical vapor deposition method

Effect of the catalyst structure on the formation of carbon nanotubes over Ni/MgO catalyst

In Situ Synthesis of Multiwalled Carbon Nanotubes over Lanio3 As Support of Cobalt Nanoclusters Catalyst for Catalytic Applications

Regulation of Ni-CNT Interaction on Mn-Promoted Nickel Nanocatalysts Supported on Oxygenated CNTs for CO2 Selective Hydrogenation.

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

Synergy of Mn and Ni Enhanced Catalytic Performance for Toluene Combustion over Ni-doped Α-Mno2 Catalysts

Promotion of manganese on Fe-based catalyst for the production of carbon nanotubes (CNTs) from plastics

Study of Preparation of Ni-Mg-O Catalysts for Growth of Carbon Nanotubes by CCVD Method

Cerium Oxide Promoted Ni/Mgo Catalyst for the Synthesis of Multi-Walled Carbon Nanotubes

Doped Mn modulates the local charge distribution of cobalt-based spinel catalysts to promote the availability of ligand lattice oxygen for complete oxidation of methane

Manganese promoting effects on the Co–Ce–Zr–Ox nano catalysts for methane dry reforming with carbon dioxide to hydrogen and carbon monoxide

Lattice Distortion in Co3O4/Mn3O4-Guided Synthesis via Carbon Nanotubes for Efficient Lean Methane Combustion

Ni Doping Promotes C-H Bond Activation and Conversion of Key Intermediates for Total Oxidation of Methane over Co<sub>3</sub>O<sub>4</sub> Catalysts

THE INFLUENCE OF Mn PROMOTER FOR SUPPORTED Ni/TiO2 CATALYST CO METHANATION

Unveiling the Mechanistic Synergy in Mn-doped NiO Catalysts with Atomic-Burry Structure: Enhanced CO Oxidation Via Ni-OH and Mn Bifunctionality

Manganese Oxides Supported on Multi-Walled Carbon Nanotubes for Selective Catalytic Reduction of NO with NH3: Catalytic Activity and Characterization

Effects of Ni modification on NO-CO reaction with MnO x -CuO/TiO2 catalysts

Construction of Co/Mn-based nanowires with adjustable surface state for boosting lean methane catalytic oxidation