Abstract:Different symmetry phases are identified in PbZr0.6Ti0.4O3 ferroelectric thin films as function of the strain introduced by CaF2, SrTiO3 and PMN‐PT substrates. Measured strain‐temperature paths are successfully described by a multi‐domain LGD‐model that predicts the symmetry phases and phase transitions, and the observed enhanced piezoelectricity in one of the phases. Lead based bulk piezoelectric materials, e.g., PbZrxTi1‐xO3 (PZT), are widely used in electromechanical applications, sensors, and transducers, for which optimally performing thin films are needed. The results of a multi‐domain Landau–Ginzberg‐Devonshire model applicable to clamped ferroelectric thin films are used to predict the lattice symmetry and properties of clamped PZT thin films on different substrates. Guided by the thermal strain phase diagrams that are produced by this model, experimentally structural transitions are observed. These can be related to changes of the piezoelectric properties in PZT(x = 0.6) thin films that are grown on CaF2, SrTiO3 (STO) and 70% PbMg1/3Nb2/3O3‐30% PbTiO3 (PMN‐PT) substrates by pulsed laser deposition. Through temperature en field dependent in situ X‐ray reciprocal space mapping (RSMs) and piezoelectric force microscopy (PFM), the low symmetry monoclinic phase and polarization rotation are observed in the film on STO and can be linked to the measured enhanced properties. The study identifies a monoclinic ‐rhombohedral MC‐MA‐R crystal symmetry path as the polarization rotation mechanism. The films on CaF2 and PMN‐PT remain in the same symmetry phase up to the ferroelectric‐paraelectric phase transition, as predicted. These results support the validity of the multi‐domain model which provides the possibility to predict the behavior of clamped, piezoelectric PZT thin films, and design films with enhanced properties.

Piezoelectric Activity and Its Stability of Polytetrafluoroethylene(ptfe)films

Temperature dependence of piezo- and ferroelectricity in ultrathin P(VDF-TrFE) films

Enhanced Piezoelectric Coefficient of PVDF-TrFE Films via In Situ Polarization

PYROELECTRIC AND THERMAL STRAIN EFFECTS OF PIEZOELECTRIC (PVDF AND PZT) DEVICES

Tuned Dielectric, Pyroelectric and Piezoelectric Properties of Ferroelectric P(Vdf-Trfe) Thin Films by Using Mechanical Loads

Piezoelectric Enhancement in P(VDF-TrFE) Copolymer Films via Controlled and Template-Induced Epitaxy

Macro-dipoles in soft/hard expanded-polytetrafluoroethylene + fluoroethylenepropylene (ePTFE + FEP) fluoropolymer-film systems for high-output piezoelectric ferroelectret-transducer applications

Preparation and Property Enhancement of Poly(Vinylidene Fluoride) (PVDF)/Lead Zirconate Titanate (PZT) Composite Piezoelectric Films

Optimized piezoelectric properties and temperature stability in PSN‐PMN‐PT by adjusting the phase structure and grain size

Unveiling the piezoelectric nature of polar α-phase P(VDF-TrFE) at quasi-two-dimensional limit

AN EXPERIMENTAL INVESTIGATION INTO THE COMPLEX ELECTROMECHANICAL BEHAVIOR OF PZT53

Piezoelectric properties of PVDF‐TrFE/BaTiO3 composite foams with different contents of TrFE units

Impact of Thermal Stress on the Piezoelectric and Dielectric Properties of Pbtio3 Thick Films on Various Substrates

Electrically induced strains and piezoelectric properties of thin layer ferroelectrics

The effects of ceramic fillers' performance and preparation process on PZT-based/P(VDF-TrFE) flexible composite films

Enhancement of Energy-Storage Density in PZT/PZO-Based Multilayer Ferroelectric Thin Films

Pmn-Pt Based Quaternary Piezoceramics With Enhanced Piezoelectricity And Temperature Stability

Enhanced Piezoelectricity by Polarization Rotation through Thermal Strain Manipulation in PbZr0.6Ti0.4O3 Thin Films

Ferroelectric and Ferroelastic Domain Related Formation and Influential Mechanisms of Vapor Deposited Piezoelectric Thin Films

Induced Polarization Imparts Piezoelectricity in Non-Crystalline Polymer Films

Piezoelectric PVDF‐TrFE nanocomposite mats filled with BaTiO3 nanofibers: The effect of poling conditions