Abstract:A typical cryogenic upper stage mission requires a reliable liquid-gas phase separation prior to engine restart in space, and auxiliary engines are usually used to provide positive acceleration effect to satisfy vapor-free liquid supplement purpose. To assist thruster logic design for an upper stage, bubble distribution inside a delivery tube and bubble spilling behaviors should be known previously. In the present paper, a CFD approach is adopted to numerically study the bubble generation and bubble movement in liquid hydrogen (LH2) delivery tube under microgravity, and the bubble spilling upward behaviors under different situations are significantly analyzed. The results show that space heat from surroundings brings about liquid evaporation inside the delivery tube, and weak convection effect induced by bubble generation process could result in random bubble distribution in the whole tube range. The maximum bubble reaches the size of tube inner diameter. Under positive acceleration effect, the bubbles spill upward and bring about gas amount decrease in the delivery tube range. Moreover, the bubble spilling upward is not a continuous process, and only the big bubble discharge exerts a significant contribution to the gas amount decrease. In addition, the tube layout and the initial gas amount have slight influence on the bubble discharge performance, but the space acceleration level plays the primary effect on this process. For the present objective, the acceleration with 10- 3g0 could drive the bubble to be discharged within 700 s. When the acceleration increases to 10- 1g0, the required time correspondingly decreases to less than 100 s. Under the acceleration level of 10-4g0, however, the bubble could not spill upward any more but a vapor amount increase phenomenon is observed. Generally, the present work provides an opportunity to understand the bubble properties inside the cryogenic delivery tube in microgravity, and the results on acceleration influence as well as acceleration period are beneficial to the sequence design of space engine restart.

Research On Fluid Transmission Performance Of Propellant Acquisition Vane Under Microgravity Environment

Experiment Investigation on Fluid Transportation Performance of Propellant Acquisition Vanes in Microgravity Environment

Experimental investigation of liquid transport in a vane type tank of satellite with microgravity

Design, Development, and Performance of an Ammonia Self-Managed Vaporization Propulsion System for Micro-Nano Satellites.

Simulation Analysis of Liquid Flow in a Vane-type Surface Tension Tank

An Effective Method for Improving the Lifetime of Double Acting Vane Pump

Flow Analysis In A Vane-Type Surface Tension Propellant Tank

Lubrication and Fluid Film Study on the Vane Tip in a Vane Pump Hydraulic Transmission Considering a Fluid and Structure Interaction

Study on propellant management device in plate surface tension tanks

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

A three-dimensional flow model of screen channel liquid acquisition devices for propellant management in microgravity

Parametric optimization and analysis of thermodynamic venting system in liquid hydrogen tank under microgravity

Numerical Investigation on Spilling Upward Performance of Hydrogen Bubbles Inside a Delivery Tube under Low-Gravity Environment

A microgravity experiment of the on-orbit fluid transfer technique using swirl flow

Static profiles of capillary surfaces in the annular space between two coaxial cones under microgravity

Study on Liquid Climbing Behavior During Filling Process in Tank Models Aboard the Chinese Space Station

Experimental Study on Refrigeration Performance and Fluid Thermal Stratification of Thermodynamic Vent

An advance in transfer line chilldown heat transfer of cryogenic propellants in microgravity using microfilm coating for enabling deep space exploration

Research on the aerostatic rotary table for micro-gravity test based on micro-orifice throttling

Gravity-Independent Experimental Study on a High-Speed Rotor Supported by Aerostatic Bearings

A Study on the Mechanical Characteristics and Self-Preservation Performance of a Deployment Mechanism with a Large Exhibition Ratio during Its Gathering Process