Abstract:The influences of excitation current on the evaluation of the corrosion with a cylindrical shape in a semi-infinite plate are presented in this paper. First, axi-symmetric model of the cylindrical coil above the corroded plate is established and an analytical solution to the surface magnetic field is derived by means of the truncated region eigenfunction expansion method (TREE). Then, the effect of the excitation current frequency and amplitude on the surface magnetic field is investigated and quantitatively evaluated. It is found that the radial magnetic induction intensity increases as the excitation current frequency increases, whereas the axial magnetic induction intensity decreases. The excitation current amplitude is proportional to the radial and axial magnetic induction intensities and does not affect the phase of magnetic induction intensity. As a result, the influence node for detecting the radius and the hollow depth for detecting the hidden depth are obviously dependent on the excitation current frequency in terms of the butterfly-shaped graph. The calculation results are in good agreement with the numerical simulation, showing that the developed model can be used to predict the optimal excitation current frequency. This work indicates that an appropriate excitation current frequency, such as f = 500 Hz, can improve the characteristic parameter resolution for detecting the corrosion radius. For the detection of hidden depth, the lower excitation current frequency, such as f = 100 Hz, can amplify the defect phenomenon and improve the detection accuracy. It is not only helpful to develop the analytical model for the surface magnetic field, but also to optimise the parameters of the test device.

Modeling of Structural Steels and Magnetite for Nde Corrosion Sensing

Measuring and Modeling of Corrosion in Structural Steels Using Magnetoelastic Sensors

Phenomenological Modeling for Magneto-Mechanical Couplings of Martensitic Variant Reorientation in Ferromagnetic Shape Memory Alloys

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Theoretical and Experimental Investigation on the Magnetomechanical Effect of Steel Bars Subjected to Cyclic Load

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Dynamic Electrochemical Model of Steel Corrosion in Concrete Microenvironment under Multifield Action of Heat-Moisture-Chlorine

Early corrosion detection in structural carbon steels using electromagnetic sensors

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

A Multiphysics Model for Studying Transient Crevice Corrosion of Stainless Steel

Influences of Excitation Current Frequency and Amplitude on Corrosion Evaluation Based on Analytical Model for Surface Magnetic Field

Quantitative Model for the Prediction of the Corrosion Rate of Cold-Rolled 316L STEEL

Modified Jiles-Atherton-Sablik Model For Asymmetry In Magnetomechanical Effect Under Tensile And Compressive Stress

Experimental study of hysteretic behavior of corroded steel with multi-angle welding joints

Research on a theoretical model of magnetic nondestructive testing for ferromagnetic materials based on the magneto–mechanical coupling effect

Hysteretic behavior and cyclic constitutive model of corroded low-alloy steel in a corrosive environment

A regressor-based hysteresis formulation for the magnetic characterisation of low carbon steels

A Multiscale Inelastic Internal State Variable Corrosion Model

A Modified Residual Stress Dependent Jile-Atherton Hysteresis Model

A Thermodynamic Model for the Prediction of Mild Steel Corrosion Products in an Aqueous Hydrogen Sulfide Environment

Multi-Physics Coupling Analysis on the Time-Dependent Localized Corrosion Behavior of Carbon Steel in CO2-H2O Environment