Atomistic Approach to Design Favored Compositions for the Ternary Al–Mg–Ca Metallic Glass Formation

S. Zhao,J. H. Li,J. B. Liu,S. N. Li,B. X. Liu

DOI: https://doi.org/10.1039/c5ra12956g

IF: 4.036

2015-01-01

RSC Advances

Abstract:An interatomic potential was constructed and applied to design favoured compositions for the ternary Al–Mg–Ca metallic glasses formation.

What problem does this paper attempt to address?

Interatomic Potential to Predict the Favored Glass-Formation Compositions and Local Atomic Arrangements of Ternary Al-Ni-Ti Metallic Glasses

Yang,Li,Lai,Liu,Liu

DOI: https://doi.org/10.3390/cryst12081065

IF: 2.7

2022-07-29

Crystals

Abstract:An empirical potential under the formalism of second-moment approximation of tight-binding potential is constructed for an Al-Ni-Ti ternary system and proven reliable in reproducing the physical properties of pure elements and their various compounds. Based on the constructed potential, molecular dynamic simulations are employed to study metallic glass formations and their local atomic arrangements. First, a glass-formation range is determined by comparing the stability of solid solutions and their corresponding counterparts, reflecting the possible composition region energetically favored for the formation of amorphous phases. Second, a favored glass-formation composition subregion around Al0.05Ni0.35Ti0.60 is determined by calculating the amorphous driving forces from crystalline-to-amorphous transition. Moreover, various structural analysis methods are used to characterize the local atomic arrangements of Al0.05NixTi0.95-x metallic glasses. We find that the amorphous driving force is positively correlated with glass-formation ability. It is worth noting that the addition of Ni significantly increases the amorphous driving force configurations of fivefold symmetry and structural disorder in Al0.05NixTi0.95-x metallic glasses until the content of Ni reaches approximately 35 at%.

materials science, multidisciplinary,crystallography
Atomistic Design Favored Compositions and Atomic-Level Structure of Mg–Ca–Ag Ternary Metallic Glasses

Fengjiao Chen,Songqi Cheng,Jian-bo Liu,Jiahao Li,Shuai Zhao,Shunning Li,Qilin Yang,Baixin Liu

DOI: https://doi.org/10.1063/1.5100912

IF: 1.697

2019-01-01

AIP Advances

Abstract:A realistic interatomic potential of Mg–Ca–Ag system is constructed under a proposed modified tight-binding scheme with the aid of ab initio calculations. Then, the favored and optimized compositions for forming Mg–Ca–Ag metallic glasses are investigated by means of the potential-based molecular dynamics simulations of atomistic modeling. The calculation shows that the Mg–Ca–Ag ternary system is liable to form amorphous alloys and the favored compositions for metallic glass formation locate at a sub-region, where the amorphization driving force is greater than that of other regions. Notably, we improve the conventional method of removing the facets in the amorphous structure analysis, and we introduce K-means clustering to eliminate the facets of the Voronoi polyhedra, which allows more reasonable description of various geometries of the different central atoms and their neighboring atoms. Then, both the Voronoi tessellation method and the Honeycutt–Andersen pair analysis are used to describe the disordered structure in Mg50Ca30Ag20 metallic glass based on the result of K-means clustering. Our work provides good guidance for composing the Mg–Ca–Ag metallic glasses, and further verifies the microstructure of the amorphous alloys.
Atomistic modeling to investigate the favored composition for metallic glass formation in the Ca-Mg-Ni ternary system.

S Zhao,J H Li,S M An,S N Li,B X Liu

DOI: https://doi.org/10.1039/c7cp00466d

IF: 3.3

2017-01-01

Physical Chemistry Chemical Physics

Abstract:A realistic interatomic potential was first constructed for the Ca-Mg-Ni system and then applied to Monte Carlo simulations to predict the favored composition for metallic glass formation in the ternary system. The simulations not only predict a hexagonal composition region, within which the Ca-Mg-Ni metallic glass formation is energetically favored, but also pinpoint an optimized sub-region within which the amorphization driving force, i.e. the energy difference between the solid solution and disordered phase, is larger than that outside. The simulations further reveal that the physical origin of glass formation is the solid solution collapsing when the solute atom exceeds the critical solid solubility. Further structural analysis indicates that the pentagonal bi-pyramids dominate in the optimized sub-region. The large atomic size difference between Ca, Mg and Ni extends the short-range landscape and facilitates the development of a hybridized packing model in the medium-range, and eventually enhancing the glass formation in the system. The predictions are well supported by the experimental observations reported so far, and could be of help for designing the ternary glass formation.
Computation Assisted Design of Favored Composition for Ternary Mg-Cu-Y Metallic Glass Formation

S. Zhao,J. H. Li,S. M. An,S. N. Li,B. X. Liu

DOI: https://doi.org/10.1039/c5cp00556f

IF: 4.036

2017-01-01

RSC Advances

Abstract:With the aid of ab initio calculations, a realistic interatomic potential was constructed for the Mg-Cu-Y ternary system under the proposed formalism of smoothed and long-range second-moment approximation of tight-binding. Taking the potential as the starting base, an atomistic computation/simulation route was developed for designing favored and optimized compositions for Mg-Cu-Y metallic glass formation. Simulations revealed that the physical origin of metallic glass formation is the collapse of crystalline lattice when solute concentration exceeds a critical value, thus leading to predict a hexagonal region in the Mg-Cu-Y composition triangle, within which metallic glass formation is energetically favored. It is proposed that the hexagonal region can be defined as the intrinsic glass formation region, or quantitative glass formation ability of the system. Inside the hexagonal region, the driving force for formation of each specific glassy alloy was further calculated and correlated with its forming ability in practice. Calculations pinpointed the optimized stoichiometry in the Mg-Cu-Y system to be Mg64Cu16Y20, at which the formation driving force reaches its maximum, suggesting that metallic glasses designed to have compositions around Mg64Cu16Y20 are most stable or easiest to obtain. The predictions derived directly from the atomistic simulations are supported by experimental observations reported so far in the literature. Furthermore, Honeycutt-Anderson analysis indicated that pentagonal bipyramids (although not aggregating to form icosahedra) dominate in the local structure of the Mg-Cu-Y metallic glasses. A microscopic picture of the medium-range packing can then be described as an extended network of the pentagonal bipyramids, entangled with the fourfold and sixfold disclination lines, jointly fulfilling the space of the metallic glasses.
Favored Composition Design and Atomic Structure Characterization for Ternary Al-Cu-Y Metallic Glasses Via Proposed Interatomic Potential.

Q. Wang,J. H. Li,J. B. Liu,B. X. Liu

DOI: https://doi.org/10.1021/jp502167t

IF: 3.466

2014-01-01

The Journal of Physical Chemistry B

Abstract:A realistic interatomic potential is constructed for the Al-Cu-Y system under a newly proposed formulism and applied to perform atomistic simulations, leading to predicting a hexagonal composition region within which metallic glass formation is energetically favored and the region is defined as the quantitative glass formation ability of the system. Amorphization driving force of a glassy alloy is then calculated to correlate the readiness of its forming ability in practice, and a local optimized stoichiometry is pinpointed to be Al74Cu14Y12, of which the metallic glass could be most stable or easiest obtainable. The predictions are well supported by the experimental observations reported so far in the literature. Further structural analysis indicates that adding Y extends the short-range landscape and facilitates developing a hybridized icosahedral- and fcc-like packing in the medium-range, eventually enhancing the glass formation ability of the system.
Atomistic Design of Favored Compositions for Synthesizing the Al-Ni-Y Metallic Glasses

Q. Wang,J. H. Li,J. B. Liu,B. X. Liu

DOI: https://doi.org/10.1038/srep16218

IF: 4.6

2015-01-01

Scientific Reports

Abstract:For a ternary alloy system promising for obtaining the so-called bulk metallic glasses (BMGs), the first priority issue is to predict the favored compositions, which could then serve as guidance for the appropriate alloy design. Taking the Al-Ni-Y system as an example, here we show an atomistic approach, which is developed based on a recently constructed and proven realistic interatomic potential of the system. Applying the Al-Ni-Y potential, series simulations not only clarify the glass formation mechanism, but also predict in the composition triangle, a hexagonal region, in which a disordered state, i.e., the glassy phase, is favored energetically. The predicted region is defined as glass formation region (GFR) for the ternary alloy system. Moreover, the approach is able to calculate an amorphization driving force (ADF) for each possible glassy alloy located within the GFR. The calculations predict an optimized sub-region nearby a stoichiometry of Al 80 Ni 5 Y 15 , implying that the Al-Ni-Y metallic glasses designed in the sub-region could be the most stable. Interestingly, the atomistic predictions are supported by experimental results observed in the Al-Ni-Y system. In addition, structural origin underlying the stability of the Al-Ni-Y metallic glasses is also discussed in terms of a hybrid packing mode in the medium-range scale.
Atomic-Approach to Predict the Energetically Favored Composition Region and to Characterize the Short-, Medium-, and Extended-Range Structures of the Ti-Nb-Al Ternary Metallic Glasses

Bei Cai,Jianbo Liu,Jiahao Li,Menghao Yang,Baixin Liu

DOI: https://doi.org/10.3390/ma12030432

IF: 3.4

2019-01-31

Materials

Abstract:Ab initio calculations were conducted to assist the construction of the n-body potential of the Ti-Nb-Al ternary metal system. Applying the constructed Ti-Nb-Al interatomic potential, molecular dynamics and Monte Carlo simulations were performed to predict a quadrilateral composition region, within which metallic glass was energetically favored to be formed. In addition, the amorphous driving force of those predicted possible glassy alloys was derived and an optimized composition around Ti15Nb45Al40 was pinpointed, implying that this alloy was easier to be obtained. The atomic structure of Ti-Nb-Al metallic glasses was identified by short-, medium-, and extended-range analysis/calculations, and their hierarchical structures were responsible to the formation ability and unique properties in many aspects.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Construction of Al-Mg-Zn Interatomic Potential and the Prediction of Favored Glass Formation Compositions and Associated Driving Forces

Bei Cai,Jiahao Li,Wensheng Lai,Jianbo Liu,Baixin Liu

DOI: https://doi.org/10.3390/ma15062062

2022-03-11

Abstract:An interatomic potential is constructed for the ternary Al-Mg-Zn system under a proposed modified tight-binding scheme, and it is verified to be realistic. Applying this ternary potential, atomistic simulations predict an intrinsic glass formation region in the composition triangle, within which the glassy alloys are more energetically favored in comparison with their solid solution counterparts. Kinetically, the amorphization driving force of each disordered state is derived to correlate the readiness of its glass-forming ability in practice; thus, an optimal stoichiometry region is pinpointed around Al35Mg35Zn30. Furthermore, by monitoring the structural evolution for various (Al50Mg50)1-xZnx (x = 30, 50, and 70 at.%) compositions, the optimized-glass-former Al35Mg35Zn30 is characterized by both the highest degree of icosahedral ordering and the highest phase stability among the investigated compositions. In addition, the icosahedral network in Al35Mg35Zn30 exhibits a much higher cross-linking degree than that in Al25Mg25Zn50. This suggests that there is a certain correlation between the icosahedral ordering and the larger glass-forming ability of Al35Mg35Zn30. Our results have significant implications in clarifying glass formation and hierarchical atomic structures, and in designing new ternary Al-Mg-Zn glassy alloys with high GFA.
Interatomic Potential to Predict the Favored and Optimized Compositions for Ternary Cu-Zr-Hf Metallic Glasses

S. Y. Luo,Y. Y. Cui,Y. Dai,J. H. Li,B. X. Liu

DOI: https://doi.org/10.1063/1.4766389

IF: 2.877

2012-01-01

Journal of Applied Physics

Abstract:Under the framework of smoothed and long range second-moment approximation of tight-binding, a realistic interatomic potential was first constructed for the Cu-Zr-Hf ternary metal system. Applying the constructed potential, Monte Carlo simulations were carried out to compare the relative stability of crystalline solid solution versus its disordered counterpart over the entire composition triangle of the system (as a function of alloy composition). Simulations not only reveal that the origin of metallic glass formation but also determine, in the composition triangle, a quadrilateral region, within which metallic glass formation is energetically favored. It is proposed to define the energy differences between the crystalline solid solutions and disordered states as the driving force for amorphization and the corresponding calculations pinpoint an optimized composition locating at an composition of Cu55Zr10Hf35, around which the driving force for metallic glass formation reaches its maximum, suggesting that the ternary Cu-Zr-Hf metallic glasses designed to have the compositions around Cu55Zr10Hf35 could be more stable than other alloys in the system. Moreover, for the Cu55Zr10Hf35 metallic glass, the Voronoi tessellation calculations reveal some interesting features of its atomic configurations and coordination polyhedra distribution.
Atomic modeling to design favored compositions for the ternary Ni–Nb–Zr metallic glass formation

s y luo,j h li,j b liu,b x liu

DOI: https://doi.org/10.1016/j.actamat.2014.06.003

IF: 9.4

2014-01-01

Acta Materialia

Abstract:An interatomic potential is constructed for the Ni–Nb–Zr ternary metal system under the newly proposed long-range empirical formulism, which has been verified to be applicable for face-centered cubic, body-centered cubic and hexagonal close-packed transition metals and their alloys. Applying the constructed potential, Monte Carlo simulations were performed to study the alloy compositions favored for Ni–Nb–Zr metallic glass formation. Simulations reveal that the underlying physics of metallic glass formation is the collapse of the crystalline lattice when the solute concentration exceeds a critical value. An intrinsic glass formation region for the Ni–Nb–Zr system can then be predicted, reflecting the possible composition region energetically favored for metallic glass formation. Furthermore, an optimal composition sub-region was pinpointed within which the driving forces for the crystalline-to-amorphous transition are larger than those outside the sub-region. The Ni–Nb–Zr amorphous alloys with the optimal compositions are expected to be more stable or easier to be produced in practice. Moreover, Voronoi tessellation analysis reveals that the atomic structure of the Ni–Nb–Zr ternary metallic glass is obviously influenced by the alloy composition, the size difference and chemical interactions of constituent metals. Ni- (or Nb-centered) icosahedral clusters are inferred as the basic local structural feature in the Ni–Nb–Zr metallic glass.
Atomistic modeling to optimize composition and characterize structure of Ni-Zr-Mo metallic glasses.

Yang M H,Li S N,Li Y,Li J H,Liu B X

DOI: https://doi.org/10.1039/c5cp00512d

IF: 3.3

2015-01-01

Physical Chemistry Chemical Physics

Abstract:An interatomic potential was constructed for the Ni-Zr-Mo ternary metal system with the newly proposed long-range empirical formulism, which has been verified to be applicable for fcc, hcp and bcc transition metals and their alloys. Applying the constructed potential, molecular dynamics simulations predict a hexagonal composition region within which metallic glass formation is energetically favored. Based on the simulation results, the driving force for amorphous phase formation is derived, and thus an optimized composition is pinpointed to Ni45Zr40Mo15, of which the metallic glass could be most stable or easiest to obtain. Further structural analysis indicates that the dominant interconnected clusters for Ni64Zr36-xMox MGs are < 0, 0, 12, 0 >, < 0, 1, 10, 2 >, < 0, 2, 8, 2 > and < 0, 3, 6, 4 >. In addition, it is found that the appropriate addition of Mo content could not only make a more ordered structure with a higher atomic packing density and a lower energy state, but also improve the glass formation ability of Ni-Zr-Mo alloys. Moreover, inherent hierarchical atomic configurations for ternary Ni-Zr-Mo metallic glasses are clarified via the short-range, medium-range and further in the extended scale of the icosahedral network.
Favored Composition Region for Metallic Glass Formation and Atomic Configurations in the Ternary Ni–Zr–Ti System Derived from N-Body Potential Through Molecular Dynamics Simulations

Zhao S. Z.,Li J. H.,Liu B. X.

DOI: https://doi.org/10.1557/jmr.2011.154

2011-01-01

Abstract:An atomistic scheme is developed based on constructed n-body potential to investigate the glass-forming composition region and atomic configurations in Ni–Zr–Ti system. The glass-forming ranges derived from the n-body potentials through molecular dynamics simulations for the binary Ni–Zr, Ni–Ti, Zr–Ti, and ternary Ni–Zr–Ti systems turns out to be very compatible with theoretical studies and experimental observations. Moreover, the coordination numbers (CNs), microchemical inhomogeneity parameter, and Honeycutt and Anderson pair analysis are also computed to exam the local atomic configurations during crystal-to-amorphous phase transition. It is found that average total CNs of amorphous phases are significantly larger compared with those in solid solution counterparts, owing to the increased fractions of CNs from 13 to 16. A tendency in forming the chemical short-range orders also exists in binary and ternary metallic glasses in the Ni–Zr–Ti system and icosahedra-related atomic configurations play important role in forming those orders.
Thermodynamic Calculation And Interatomic Potential To Predict The Favored Composition Region For The Cu-Zr-Al Metallic Glass Formation

Y Y Cui,T L Wang,J H Li,Y Dai,B X Liu

DOI: https://doi.org/10.1039/c0cp01722a

IF: 3.3

2011-01-01

Physical Chemistry Chemical Physics

Abstract:For the Cu-Zr-Al system, the glass forming compositions were firstly calculated based on the extended Miedema's model, suggesting that the amorphous phase could be thermodynamically favored over a large composition region. An n-body potential was then constructed under the smoothed and long-range second-moment-approximation of tight-binding formulism. Applying the constructed Cu-Zr-Al potential, molecular dynamics simulations were conducted using solid solution models to compare relative stability of crystalline solid solution versus its disordered counterpart. Simulations reveal that the physical origin of metallic glass formation is crystalline lattice collapsing while solute concentration exceeding the critical value, thus predicting a hexagonal composition region, within which the Cu-Zr-Al ternary metallic glass formation is energetically favored. The molecular dynamics simulations predicted composition region is defined as the quantitative glass-forming-ability or glass-forming-region of the Cu-Zr-Al system.
Atomistic Simulation Study of Favored Compositions of Ni-Nb-Al Metallic Glasses

Bei Cai,MengHao Yang,JianBo Liu,JiaHao Li,BaiXin Liu

DOI: https://doi.org/10.1007/s11431-018-9342-3

2018-01-01

Science China Technological Sciences

Abstract:This study investigates the formation process of Ni-Nb-Al metallic glasses. To this end, a long-range n-body potential was constructed for the Ni-Nb-Al ternary metal system, and applied to atomistic simulations. The simulations not only showed the physical origins of the amorphous phase formation, but also quantitatively predicted a hexagonal compositional region that energetically favors the glass formation. The energy difference between the solid solution and metallic glass, which generates the amorphization driving force (ADF), was suggested to indicate the glass-formation ability (GFA) of each alloy. Based on the computed ADFs, the Ni55Nb25Al20 alloy exhibited the highest GFA among the Ni-Nb-Al members, implying that the glass formed by this amorphous alloy is more thermodynamically stable than other alloys in the system. In a Voronoi tessellation analysis, the knee point of the coordination-number distribution curve corresponded to the glass-formation region of the Ni-Nb-Al system.
Atomic approach to the optimized compositions of Ni–Nb–Ti glassy alloys with large glass-forming ability

yang li,jiahao li,jianbo liu,baixin liu

DOI: https://doi.org/10.1039/c4ra08852b

IF: 4.036

2015-01-01

RSC Advances

Abstract:In the present study, we first constructed a long-range empirical potential for a ternary Ni-Nb-Ti system consisting of fcc, bcc and hcp metals, and then employed the verified potential in atomic simulations to study the formation of Ni-Nb-Ti glassy alloys. Atomic simulations derived a pentagon composition region of the Ni-Nb-Ti system, within which glassy alloys are inclined to form. Furthermore, the driving force for the transformation from a crystalline solid solution to a glassy alloy could be correlated to the glass-forming ability (GFA) of a particular alloy. The GFA of ternary Ni-Nb-Ti alloys with various compositions were assessed on the basis of atomic simulation results, obtaining an optimized composition region, within which the alloys possess larger GFA, as well as an optimum composition with the largest GFA. The optimum alloy is expected to be the most stable and the size of the obtainable glass may be the largest in the ternary Ni-Nb-Ti system. The optimized composition region and optimum composition could provide guidance to design the compositions of Ni-Nb-Ti metallic glasses.
Atomistic Simulations To Predict Favored Glass-Formation Composition And Ion-Beam-Mixing Of Nano-Multiple-Metal-Layers To Produce Ternary Amorphous Films

Meng Hao Yang,Jia Hao Li,Bai Xin Liu,Jian Bo Liu

DOI: https://doi.org/10.3390/met8020129

IF: 2.695

2018-01-01

Metals

Abstract:Based on the framework of long-range empirical formulas, the interatomic potentials were constructed for the Ni-Nb-Mo (fcc-bcc-bcc) and Ni-Zr-Mo (fcc-hcp-bcc) ternary metal systems. Applying the constructed potentials, atomistic simulations were performed to predict the energetically favored glass formation regions (GFRs) in the respective composition triangles of the systems. In addition, the amorphization driving forces (ADFs), i.e., the energy differences between the solid solutions and disordered phases, were computed and appeared to correlate with the so-called glass forming abilities. To verify the atomistic prediction, ion beam mixing with nano-multiple-metal-layers was carried out to produce ternary amorphous films. The results showed that the composition of ternary amorphous films obtained by ion beam mixing all locate inside the GFRs, supporting the predictions of atomistic simulations. Interestingly, the minimum ion dosage required for amorphization showed a negative correlation with the calculated ADF, implying that the predicted amorphization driving force could be an indicator of the glass formation ability.
Efficient atomic packing clusters and glass formation in ternary Al-based metallic glasses

C. S. Ma,J. Zhang,W. L. Hou,X. C. Chang,J. Q. Wang

DOI: https://doi.org/10.1080/09500830802345633

IF: 1.195

2008-01-01

Philosophical Magazine Letters

Abstract:In this article, we propose an efficient atomic packing cluster-based composition protocol to help design Al-based metallic glasses. Its validity is verified by some typical experimental data from the literatures. Furthermore, with this understanding, the Al-Ni-Y alloy system is re-evaluated. As a result, the best glass former Al86Ni9Y5 in this system, with the critical thickness of about 500 mu m, is successfully fabricated by wedge casting.
Formation of the Ni–Zr–Al Ternary Metallic Glasses Investigated by Interatomic Potential Through Molecular Dynamic Simulation

Shizhen Zhao,Jiahao Li,Baixin Liu

DOI: https://doi.org/10.1143/jpsj.79.064607

2010-01-01

Journal of the Physical Society of Japan

Abstract:Under the framework of second moment approximation of the tight binding theory, a realistic interatomic potential is first developed for the Ni-Zr-Al ternary metal system and then applied to predict the glass-forming ability of the system through molecular dynamics simulation. It is found that when the composition falls into the hexagonal region defined by six vertexes of Ni20Zr80Al0, Ni0Zr65Al35, Ni0Zr25Al75, Ni20Zr0Al80, Ni40Zr0Al60, and Ni77Zr23Al0, the super-saturated solid solution becomes unstable and spontaneously turns into the disorder state, i.e., the metallic glass state. The defined composition region could be considered as a quantitative glass-forming ability, within which the Ni-Zr-Al ternary metallic glass is predicted to be energetically favored to form. Interestingly, the prediction based on the interatomic potential matches well with experimental observations.
Thermodynamic Predicting and Atomistic Modeling the Favored Compositions for Mg–Ni–Y Metallic Glasses

Q. Wang,J. H. Li,B. X. Liu

DOI: https://doi.org/10.1039/c5ra09313a

IF: 4.036

2015-01-01

RSC Advances

Abstract:For Mg–Ni–Y system, glass formation is jointly studied by thermodynamic calculations and atomistic simulations. The prediction results have extensive implications for the Mg-based family and could be of great help for guiding the composition design.
Predicting Composition Dependence of Glass Forming Ability in Ternary Al-Cu-Y System by Thermodynamic Calculation

Qi Wang,Jiahao Li,Jianbo Liu,Baixin Liu

DOI: https://doi.org/10.3390/met4040519

IF: 2.695

2014-01-01

Metals

Abstract:The composition dependence of glass forming ability in the ternary Al-Cu-Y system is predicted by thermodynamic calculations based on the Miedema’s model and Alonso’s method. By comparing the relative energetic status of the amorphous phase versus the solid solution phase, a hexagonal composition region that energetically favoring the metallic glass formation is predicted. The glass formation driving force and crystallization resistance are further calculated and the composition of Al72Cu10Y18 is pinpointed with the largest glass forming ability in the Al-Cu-Y system. The calculation results are well supported by the experimental observations reported in the literature.

Atomistic Approach to Design Favored Compositions for the Ternary Al–Mg–Ca Metallic Glass Formation

Interatomic Potential to Predict the Favored Glass-Formation Compositions and Local Atomic Arrangements of Ternary Al-Ni-Ti Metallic Glasses

Atomistic Design Favored Compositions and Atomic-Level Structure of Mg–Ca–Ag Ternary Metallic Glasses

Atomistic modeling to investigate the favored composition for metallic glass formation in the Ca-Mg-Ni ternary system.

Computation Assisted Design of Favored Composition for Ternary Mg-Cu-Y Metallic Glass Formation

Favored Composition Design and Atomic Structure Characterization for Ternary Al-Cu-Y Metallic Glasses Via Proposed Interatomic Potential.

Atomistic Design of Favored Compositions for Synthesizing the Al-Ni-Y Metallic Glasses

Atomic-Approach to Predict the Energetically Favored Composition Region and to Characterize the Short-, Medium-, and Extended-Range Structures of the Ti-Nb-Al Ternary Metallic Glasses

Construction of Al-Mg-Zn Interatomic Potential and the Prediction of Favored Glass Formation Compositions and Associated Driving Forces

Interatomic Potential to Predict the Favored and Optimized Compositions for Ternary Cu-Zr-Hf Metallic Glasses

Atomic modeling to design favored compositions for the ternary Ni–Nb–Zr metallic glass formation

Atomistic modeling to optimize composition and characterize structure of Ni-Zr-Mo metallic glasses.

Favored Composition Region for Metallic Glass Formation and Atomic Configurations in the Ternary Ni–Zr–Ti System Derived from N-Body Potential Through Molecular Dynamics Simulations

Thermodynamic Calculation And Interatomic Potential To Predict The Favored Composition Region For The Cu-Zr-Al Metallic Glass Formation

Atomistic Simulation Study of Favored Compositions of Ni-Nb-Al Metallic Glasses

Atomic approach to the optimized compositions of Ni–Nb–Ti glassy alloys with large glass-forming ability

Atomistic Simulations To Predict Favored Glass-Formation Composition And Ion-Beam-Mixing Of Nano-Multiple-Metal-Layers To Produce Ternary Amorphous Films

Efficient atomic packing clusters and glass formation in ternary Al-based metallic glasses

Formation of the Ni–Zr–Al Ternary Metallic Glasses Investigated by Interatomic Potential Through Molecular Dynamic Simulation

Thermodynamic Predicting and Atomistic Modeling the Favored Compositions for Mg–Ni–Y Metallic Glasses

Predicting Composition Dependence of Glass Forming Ability in Ternary Al-Cu-Y System by Thermodynamic Calculation