Abstract:This work presents research results concerning to the fabrication of hybrid solar cells in a superstrate configuration with the following structure: glass/SnO 2 :F/ZnO + CdS/CdTe + CdCl 2 -TT/PEDOT:PSS-TT/Cu-Mo. After Cadmium Telluride (CdTe) absorber layer processing, the organic conjugated polymer Poly(3,4-ethylenedioxythiophene): poly(styrene sulphonate) (PEDOT:PSS) was deposited with a thickness around 50 nm, then a thermal annealing (TA) was carried out varying annealing time (20-40 min) and temperature (80-120 °C). The physical properties and output electrical parameters of the devices were measured and compared with a reference solar cells without TA. A decrease of the resistivity values was reached as a result of the incorporation of PEDOT:PSS on CdTe as a hole transport layer. CdTe/PEDOT:PSS structure was characterized by profilometry, four-probe method, UV–Vis spectroscopy, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and Raman spectroscopy. The electrical performance of the fabricated hybrid solar cells was analysed through the current density vs. voltage (J vs. V) characteristic, External Quantum Efficiency (EQE) measurements and the values spread distribution for each electrical parameter was also discussed. A highest conversion efficiency around 15.2% was obtained for a device in which the TA was performed at 100 °C during 30 min with output electrical parameters values of V oc ~ 0.778 V, J sc ~ 34.0 mA/cm 2 , FF ~ 0.55 and EQE values above 55%, resulting this in an improvement of the use of PEDOT:PSS in hybrid solar cells. A monitoring of the degradation effect of the output electrical values was carried out after a period of 24 months and an average degradation rate around 20% was found, however for devices processed at higher temperatures of TA, degradation rate of the conversion efficiency was at least 3%.

Investigation of in situ annealing on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate): towards all-solution-processed inverted polymer solar cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Perovskite Solar Cells by a Two-Step Temperature-Control Annealing Process

Buried Solvent Assisted Perovskite Crystallization for Efficient and Stable Inverted Solar Cells

Investigation of the effects of thermal annealing to PEDOT:PSS on the photovoltaic response of hybrid solar cells

Surface Regulation with Polymerized Small Molecular Acceptor Towards Efficient Inverted Perovskite Solar Cells

Refining the Substrate Surface Morphology for Achieving Efficient Inverted Perovskite Solar Cells

Improved Current Density of Inverted Perovskite Solar Cells via Hole Transport Layer Doping

Highly efficient inverted polymer solar cells based on ethanolamine-treated indium tin oxide as cathode

Energy Level Tuning in CsPbBr3 Perovskite Solar Cells through In Situ-Polymerized PEDOT Hole Transport Layer

Synergistic optimization of interfacial energy-level alignment and defect passivation toward efficient annealing-free inverted polymer solar cells

Tuning the Phase Separation of PEDOT:PSS Affords Efficient Lead-Free Perovskite Solar Cells

Research Progress on Polymer Solar Cells Based on PEDOT:PSS Electrodes

Improving Contact and Passivation of Buried Interface for High‐Efficiency and Large‐Area Inverted Perovskite Solar Cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Remanent solvent management engineering of perovskite films for PEDOT: PSS-based inverted solar cells

Solution processable self-doped polyaniline as hole transport layer for inverted polymer solar cells

Understanding the Mechanism of PEDOT: PSS Modification Via Solvent on the Morphology of Perovskite Films for Efficient Solar Cells

Performance Improvement of All-Inorganic, Hole-Transport-Layer-Free Perovskite Solar Cells Through Dipoles-Adjustion by Polyethyleneimine Incorporating

High-Efficiency Inverted Perovskite Solar Cells via In Situ Passivation Directed Crystallization

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications