Abstract:Graphene nanoplate (GNP) is a two-dimensional plate-like carbon material with high aspect ratio and excellent electrical conductivity. It is one of the most commonly used fillers for conductive polymer composites (CPCs), which have potential applications in flexible electrodes and sensors. The electrical properties of the CPCs particularly depend on the microstructure of GNP networks. The electrical conductivity of the CPCs leaps in several magnitude levels when the graphene concentration reaches a critical value, which is defined as the percolation threshold. For ordinary isotropic CPCs, the percolation threshold is relatively high, which leads to inferior performance with poor mechanical and electrical properties. Aligning the graphene plates is an effective method to reduce the percolation threshold of the CPCs. Carbonyl iron particles (CIPs) are easily aligned to form chain-like structures when a magnetic field is applied. In this work, CIPs and GNPs are mixed with polydimethylsiloxane (PDMS), and the hybrid is cured under a magnetic field of 0.5 T. The alignment of CIPs induces the GNPs in the PDMS to orientate in a certain direction under the applied magnetic field generating anisotropic structures. Both isotropic and anisotropic structured GNPs/PDMS composites are prepared with various GNP concentrations. The microstructure and electrical conductivity of the GNPs/PDMS composites are investigated by experimental methods. It is found that anisotropic graphene networks are formed and the percolation threshold of the anisotropic composites is 0.15 vol%, compared to that of the isotropic composites which is 0.85 vol%. The alignment of GNPs significantly reduces the percolation threshold. Furthermore, a plate lattice model is proposed to reveal the effect of the alignment of GNPs on the formation of conductive networks. With the increase of the alignment degree of GNPs, the percolation threshold decreases significantly, which is consistent with the experimental results.

Effect of CNTs Alignment on Electrical Conductivity of PDMS/MWCNTs Composites

The Effect of Carbon Nanotube Chirality on the Electrical Conductivity of Polymer Nanocomposites Considering Tunneling Resistance

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

The Electrical Resistivity and Percolation Threshold of MWCNTs/polymer Composites Filled with a Few Aligned Carbonyl Iron Particles

Thermal Conductivity of Aligned CNT/polymer Composites Using Mesoscopic Simulation

Reduced Percolation Threshold of Multi-Walled Carbon Nanotubes/polymer Composites by Filling Aligned Ferromagnetic Particles

Alignment of Carbon Iron into Polydimethylsiloxane to Create Conductive Composite with Low Percolation Threshold and High Piezoresistivity: Experiment and Simulation

Modelling the effects of carbon nanotube length non-uniformity and waviness on the electrical behavior of polymer composites

Effect of Filler Alignment on Piezo-Resistive and Mechanical Properties of Carbon Nanotube Composites

Electrical properties of anisotropic graphene/PDMS composites induced by aligned ferromagnetic particles

Analytical modeling of the electrical conductivity of CNT-filled polymer nanocomposites

The nonlinear synergistic enhancement electric conductive effect in polymer-matrix composites containing hybrid fillers of carbon nanotubes and graphene nanoplatelets

Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality

Preparation and properties of composites with staggered alignment of carbon nanotubes induced by electric field.

Modeling the synergistic electrical percolation effect of carbon nanotube/graphene/polymer composites

A Theoretical Investigation of the Electrical and Dielectric Properties of PDMS‐CNT

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

A new analytical model for predicting the electrical conductivity of carbon nanotube nanocomposites

Effects of the Dispersion State and Aspect Ratio of Carbon Nanotubes on Their Electrical Percolation Threshold in a Polymer

Interfacial Distribution of PMMA-grafted MWCNTs in Immiscible Blends for Improved Electrical Conductivity

Selective Location and Conductive Network Formation of Multiwalled Carbon Nanotubes in Polycarbonate/poly(vinylidene Fluoride) Blends