Synthesis and the Comparative Lithium Storage Properties of Hematite: Hollow Structures Vs. Carbon Composites

Chao Wu,Quan-Chao Zhuang,Lei-Lei Tian,Yong-Xin Wu,Zhi-Cheng Ju,Hong Zhang,Xin-Xi Zhang,Hong-Bo Chen

DOI: https://doi.org/10.1039/c4ra16091f

IF: 4.036

2015-01-01

RSC Advances

Abstract:The cycling performance of hollow structure α-Fe2O3improves with the increase of aspect ratio.

What problem does this paper attempt to address?

The Comparative Lithium Storage Properties of Urchin-Like Hematite Spheres: Hollow Vs. Solid

Bao Wang,Jun Song Chen,Xiong Wen (David) Lou

DOI: https://doi.org/10.1039/c2jm31108a

2012-01-01

Journal of Materials Chemistry

Abstract:Urchin-like alpha-Fe2O3 spheres, hollow or solid, are obtained by thermally annealing their alpha-FeOOH precursor structures, which are synthesized via a facile hydrothermal method. The "hollowness" of these alpha-FeOOH spheres can be readily controlled by varying the glycerol concentration. The structure-dependent lithium storage properties of these alpha-Fe2O3 samples might shed light on the future development of advanced electrode materials for lithium-ion batteries.
Synthesis and Lithium Storage Properties of Hollow Fe2O3/Graphene Nanocomposites

Zou Qiong,Zai Jian-Tao,Liu Ping,Qian Xue-Feng

2011-01-01

Abstract:Hollow Fe2O3/graphene nanocomposites were synthesized by a hydrothermal method, and they were characterized by XRD and SEM. A plausible formation mechanism for the nanocomposites could be based on the catalytic oxidation of carboxyl groups of graphite oxide(GO) in the presence of Fe3+ ions to form graphene nanosheets(GNS), and the released CO2 provided templates for the formation of hollow Fe2O3, and then hollow Fe2O3/graphene nanocomposites were formed in-situ. The obtained nanocomposites show excellent Li storage performances. After 50 cycles, a capacity of 520 mA . h/g(437 mA . h/g) was kept at a high current density of 200 mA/g(400 mA/g).
Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Xiaoyu Zhao,Yingbing Zhang,Yongdan Hou,Zijian Zhao,Yaxin Gong,Yanfei Wang,Huige Wei,Vilas G. Pol

DOI: https://doi.org/10.1007/s42114-022-00527-x

IF: 11.806

2022-07-20

Advanced Composites and Hybrid Materials

Abstract:A beneficial strategy for enhancing the electronic conductivity of transition metal chalcogenides (TMCs) as lithium-ion battery anode material is through shortening the charge transfer path between the sulfide particles. However, the combination between the carbon-based matrix and electroactive materials is sometimes weak, which hinders the cycling stability. In this paper, the Ti-based MXene, T3C2Tx, was used as a conductive frame, combined with the ZIF-67-based CoS2/C grains yielding Ti3C2Tx/CoS2/C composite electrode through one-step and two-step synthesis methods, which displayed significantly enhanced capacity, rate performancem, and cycling stability. The compsoite reached a capacity retention of 82.6% after 100 cycles with a significantly higher capacity of 1020.5 mAh/g at 0.2 A/g current density. After 100 discharge–charge cycles, the Ti3C2Tx/CoS2/C composite revealed a low volume expansion of 9.5%, suggesting superior structural integrity and stability with the synergistic effect of both MXene 2D and CoS2/C 3D nanostructures.Graphical abstract

nanoscience & nanotechnology,materials science, composites
Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

Kun Wang,Jun Cao,Jianhong Gao,Jing Zhao,Wei Jiang,Waqar Ahmad,Jingchao Jiang,Min Ling,Chengdu Liang,Jun Chen

DOI: https://doi.org/10.1016/j.susmat.2023.e00744

IF: 10.681

2023-01-01

Sustainable Materials and Technologies

Abstract:The low-cost earth-abundant transition metal oxides (TMOs) reveal high-capacity as post-carbon anodes towards Li-ion batteries (LIBs), however, their intrinsically low electroconductivity, sluggish Li-ion diffusion and unde-sirably large volume change during cycles, strictly hamper their practical applications. Doping heteroatoms and designing hollow structures is a facile strategy in improving electronic/ionic conductivity and buffering volume expansion, respectively. Herein, a design strategy of inner-outer phosphorus (P) doped hollow spindle-like alpha-Fe2O3 nanoparticles (NPs), is introduced, where hollow spindle-like alpha-Fe2O3 NPs endure volume change during Li-ion (de-)intercalation process while inner-outer P-doping induced phase transition of Fe2O3-to-Fe3O4 causes P-Fe3O4/Fe2O3 heterojunction to improve the ionic/electronic conductivity and Li-ion active sites owing to abundant oxygen vacancies. Significantly, calcination temperatures determined the P contents, where increasing temperature from 300 degrees C (1 wt% P) to 500 degrees C (29 wt% P) exhibits the emergence and disappearance of P-Fe3O4/Fe2O3 heterojunctions and the transition of hollow-to-solid structures, which thus improves and attenuates their electrochemical performances, electronic/ionic conductivity and reaction kinetics. Notably, 10 wt% P doped Fe2O3 (350 degrees C) anode exhibits the remarkable rate capacity and cycle stability. This work thus deciphers the structure-activity relationship of electrode materials and opens a new avenue to enhance the electrochemical performance of energy storage devices.
One-pot synthesis of hematite@graphene core@shell nanostructures for superior lithium storage

Dezhi Chen,Hongying Quan,Junfei Liang,Lin Guo

DOI: https://doi.org/10.1039/c3nr03484d

IF: 6.7

2013-10-21

Nanoscale

Abstract:Novel hematite@graphene composites have been successfully synthesized by a one-pot surfactant governed approach under mild wet-chemical conditions. A series of characterizations including X-ray diffraction (XRD), Raman spectrum, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the hematite nanoparticles with relatively uniform size were encapsulated by graphene layers and were able to form core-shell nanostructures. The electrochemical properties of hematite@graphene core-shell nanostructures as anodes for lithium-ion batteries were evaluated by galvanostatic charge-discharge and AC impedance spectroscopy techniques. The as-prepared hematite@graphene core-shell nanostructures exhibited a high reversible specific capacity of 1040 mA h g(-1) at a current density of 200 mA g(-1) (0.2 C) after 180 cycles and excellent rate capability and long cycle life. Furthermore, a reversible capacity as high as 500 mA h g(-1) was still achieved after 200 cycles even at a high rate of 6 C. The electrochemical test results show that the hematite@graphene composites prepared by the one-pot wet chemical method are promising anode materials for lithium-ion batteries.
Synthesis of Porous CoFe2O4 Octahedral Structures and Studies on Electrochemical Li Storage Behavior

Xinning Fu,Dan Chen,Min Wang,Yushi Yang,Qingzhi Wu,Jianmin Ma,Xinsheng Zhao

DOI: https://doi.org/10.1016/j.electacta.2013.11.054

IF: 6.6

2013-01-01

Electrochimica Acta

Abstract:Ternary transition metal oxides are the important alternatives to commercial graphite for future lithium-ion batteries (LIBs). In this work, porous Co2FeO4 octahedral structures were synthesized by annealing the precursor from hydrothermal process, and the electrochemical properties of the samples as anode for LIBs were studied. Electrochemical measurements demonstrate that porous Co2FeO4 structures with octahedral shape display remarkably high discharge capacity, which is even slightly higher than the theoretical value of Co2FeO4. The specific capacity retention of Co2FeO4 porous structure annealed at 700°C reaches ca. 96.4% of that in the first cycle after 50 cycles. It is expected that the as-synthesized porous Co2FeO4 octahedrons can be a promising anode material for LIBs.
Synthesis and Characterization of Alpha-Fe2o3/C Composite Anode for Lithium Ion Batteries

Wu Chao,Zhuang Quanchao,Xu Shoudong,Cui Yongli,Qiang Yinghuai,Sun Zhi

DOI: https://doi.org/10.6023/a1106242

2012-01-01

Acta Chimica Sinica

Abstract:The alpha-Fe2O3/C composite was prepared by high-temperature solid-state reaction, its structure and electrochemical performance were characterized by X-ray diffraction (XRD), scanning electron miscroscopy (SEM), charge/discharge test and electrochemical impedance spectroscopy (EIS). The electrochemical test results indicated that the alpha-Fe2O3/C composite showed an reversible charge capacity of 935.3 mAh.g(-1) after 50 cycles, and had better cycle performance compared with commercial alpha-Fe2O3. Electrochemical impedance spectroscopy test indicated that there appeared three semicircles respectively representing the Li-ion migration in solid electrolyte interface film (SEI film), electrical conductivity and charge transfer in the first lithiation, and their evolutive principles were also investigated.
Biomorphic Combustion Synthesis of Hematite Porous Structure with Enhanced Li Storage Properties

Q. Q. Xiong,Z. G. Ji,H. Y. Qin

DOI: https://doi.org/10.1016/j.matlet.2016.01.047

IF: 3

2016-01-01

Materials Letters

Abstract:Uniform porous Fe2O3 nanostructure was prepared by a facile and effective biomorphic combustion synthesis. Porous Fe2O3 nanostructure is assembled by primary nanoparticles and lots of open pores between interconnected nanoparticles. As an anode material for the lithium-ion batteries (LIBs), the resultant porous Fe2O3 electrode shows high specific capacity and good cycle stability (891.8mAhg−1 at 200mAg−1 up to 150 cycles), as well as enhanced rate capability. The excellent electrochemical performance can be attributed to 3D porous structure with the short pathway for the diffusion of Li+, high interfacial contact area between the nanoparticles and electrolyte, and good accommodation of structural stress.
Synthesis and electrochemical performance of Li1+xTi2-xFex(PO4)3</su b>/C anode for aqueous lithium ion battery

Weiwen Meng,Cong Li,Meng Yao,Zhangxing He,Xianwen Wu,Zhen Jiang,Lei Dai,Ling Wang

DOI: https://doi.org/10.1016/j.apt.2020.01.015

IF: 4.969

2020-01-01

Advanced Powder Technology

Abstract:•A series of Li1+xTi2−xFex(PO4)3/C (x = 0, 0.05, 0.10, 0.30) composites were synthesized via sol-gel method.•The performance of LiTi2(PO4)3/C as anode for ALIBs was dramatically enhanced by Fe doping on Ti sites.•Fe doped LiTi2(PO4)3/C (Li1.1Ti1.9Fe0.1(PO4)3/C) composite demonstrates superior rate performance and excellent cycling stability.
Heterogeneous interface in hollow ferroferric oxide/ iron phosphide@carbon spheres towards enhanced Li storage

Zhaoqian Yan,Zhihao Sun,Hongshou Liu,Zihao Guo,Peng Wang,Lanling Zhao,Lei Qian,Xing-Long Wu

DOI: https://doi.org/10.1016/j.jcis.2022.03.030

IF: 9.9

2022-07-01

Journal of Colloid and Interface Science

Abstract:Heterogeneous interface and structural engineering play important roles for electrochemical performance of lithium-ion batteries. Herein, heterostructures of hollow Fe3O4/FeP spheres coated with carbon shell (H-Fe3O4/) are designed to enhance lithium storage performance. As bifunctional anode materials, the H-Fe3O4/ spheres show the good rate performance with 458.4 mAh g−1 at 5 A g−1 and long-cyclic performance (630.2 mAh g−1 at 2.0 A g−1 after 1000 cycles). Density functional theory calculations demonstrate that the heterogeneous interfaces from (3 1 1) plane of Fe3O4 and (0 0 2) plane of FeP possess high charge density and distinct metallic character, which can improve the conductivity, increase the adsorption energy, provide more active sites and reduce the transfer barrier of ions and electrons. Besides, hollow structure of H-Fe3O4/ not only alleviates the volume expansion during lithiation/delithiation process but also shortens the diffusion distance of Li ions. In addition, the ex-situ X-ray diffraction and X-ray photoelectron spectroscopy are used to reveal the electrochemical Li storage mechanisms of H-Fe3O4/ This work provides a novel route for design and preparation of Fe-based heterostructures for various energy storage systems in the future.

chemistry, physical
Lithium Storage Performance of Hollow and Core/Shell TiO2 Microspheres Containing Carbon

Songgyun Ri,Huiping Deng,Lihui Zhou,Jun Hu,Honglai Liu,Ying Hu

DOI: https://doi.org/10.1016/j.cjche.2014.09.005

2014-01-01

Abstract:TiO2 microspheres containing carbon have been synthesized viaa one-pot hydrothermal process using CTAB as the mesoporous template and nanoparticle stabilizer and Ti(SO4)2 and sucrose as titanium and carbon precursors, respectively. Through well designed calcinations, TiO2 microspheres with various amounts of carbon-residue, such as core/shell [email protected]2, hollow neat H–TiO2, and hollow C/TiO2 composites, are obtained. When these microspheres are used as anode materials for lithium ion batteries, the lithium storage performance is significantly influenced by the structure and carbon-residue. With a thin shell of TiO2 nanoparticles and carbon-residue, the capacity of hollow C/TiO2 composites maintains at 143.3 mA·h·g− 1 at 0.5 C (83.5 mA·g− 1) after 100 cycles. Moreover, after high rate charge/discharge cycles from 0.2 C to 20 C and back to 0.2 C again, the reversible capacity recovers atas high as 195.1 mA·h·g− 1 with respect to its initial value of 205.0 mA·h·g− 1. The results of cycle voltammograms and electrochemical impedance spectroscopy further reveal that Li+ insertion/extraction processes are reversible, and the diffusion coefficient of Li+ in the hollow C/TiO2 composites is much higher than those of others, because the hollow structure can act as the ion-buffering reservoir and facilitate Li+ transfer from both sides of the shell, and the carbon-residue in the shell improves the conductivity as well.
Two-dimensional hollow carbon skeleton decorated with ultrafine Co3O4 nanoparticles for enhanced lithium storage

Hang Zhang,Fang Wang,Yanzhi Wang,Hengwei Wei,Wei Zhang,Rui Cao,Haoquan Zheng

DOI: https://doi.org/10.1016/j.jcis.2022.11.020

Abstract:Transition metal oxides have shown high theoretical capacities as anode materials and have been considered as high potential materials to substitute graphite for composing new generations of lithium-ion batteries (LIBs). However, the considerable volume changes of transition metal oxide materials during practical processes have limited their applications. Herein, we report a simple approach to construct a two-dimensional (2D) hollow carbon skeleton decorated with ultrafine Co3O4 nanoparticles (Co3O4/C). This composite is derived from a leaf-like zeolitic imidazolate framework-L (ZIF-L (Co)) via etching coordination using tannic acid (TA). The Co3O4/C has a unique structure consisting of 2D carbon skeleton, ultrafine Co3O4 nanoparticle, and open channel, which can accelerate electron transport, alleviate volume change, and facilitate ion diffusion. Benefiting from these features, the LIBs assembled using Co3O4/C as anode material exhibits superior reversible cycle performance and impressive rate property. This study provides an efficient strategy for implementing transition metal oxide-based composites for energy storage applications.
Cycling Reconstructed Hierarchical Nanoporous High-Entropy Oxides with Continuously Increasing Capacity for Li Storage

Naixuan Ci,Yixuan Hu,Qingqing Li,Jun Cheng,Hongqiang Zhang,Deping Li,Kaikai Li,Kolan Madhav Reddy,Lijie Ci,Guoqiang Xie,Xingjun Liu,Hua-Jun Qiu

DOI: https://doi.org/10.1002/smtd.202301322

IF: 12.4

2024-01-01

Small Methods

Abstract:High-entropy oxides (HEOs) have been showing great promise in a wide range of applications. There remains a lack of clarity regarding the influence of nanostructure and composition on their Li storage performance. Herein, a dealloying technique to synthesize hierarchical nanoporous HEOs with tunable compositions is employed. Building upon the extensively studied quinary AlFeNiCrMnOx, an additional element (Co, V, Ti, or Cu) is introduced to create senary HEOs, allowing for investigation of the impact of the added component on Li storage performance. With higher specific surface areas and oxygen vacancy concentrations, all their HEOs exhibit high Li storage performances. Remarkably, the senary HEO with the addition of V (AlNiFeCrMnVOx) achieves an impressive capacity of 730.2 mAh g-1 at 2.0 A g-1, which surpasses all reported performance of HEOs. This result demonstrates the synergistic interaction of the six elements in one HEO nanostructure. Additionally, the battery cycling-induced reconstruction and cation diffusion in the HEOs is uncovered, which results in an initial capacity decrease followed by a subsequent continuous capacity increase and enhanced Li ion diffusion. The results highlight the crucial roles played by both nanoporous structure design and composition optimization in enhancing Li storage of HEOs. This work reports the Li storage properties of nanoporous high-entropy spinel oxide. The authors found that the addition of V, Co, or Ti beyond five elements can enhance the Li storage performance. Especially, the AlNiFeMnCrV combination delivered the highest capacity of 730.2 mAh g-1 at 2.0 A g-1.image
Hematite Hollow Spindles and Microspheres: Selective Synthesis, Growth Mechanisms, and Application in Lithium Ion Battery and Water Treatment

Suyuan Zeng,Kaibin Tang,Tanwei Li,Zhenhua Liang,Dong Wang,Yongkun Wang,Weiwei Zhou

DOI: https://doi.org/10.1021/jp0719661

2007-01-01

The Journal of Physical Chemistry C

Abstract:In this article, a facile route using simple hydrothermal reaction and sequential calcinations to synthesize α-Fe2O3 hollow nanostructures without employing templates or matrices is presented. By simply changing the basic source, hollow spindles and microspheres can be selectively synthesized. The concentration of the reagents and the kind of basic source or coordination reagents are verified to have great influence on the morphologies of the products. TEM images clearly show the hollow natures of the as-obtained products. Growth mechanisms for the hollow nanostructures were proposed. Because of the unique hollow structures of the samples, the potential applications of the as-obtained hematite hollow nanostructures on lithium ion battery and water treatment were also investigated.
Facile Synthesis of Fe3O4 Hollow Spheres/carbon Nanotubes Composites for Lithium Ion Batteries with High-Rate Capacity and Improved Long-Cycle Performance

Chao Wu,Quanchao Zhuang,Yongxin Wu,Leilei Tian,Yongli Cui,Xinxi Zhang

DOI: https://doi.org/10.1016/j.matlet.2013.09.029

IF: 3

2013-01-01

Materials Letters

Abstract:Fe3O4 hollow spheres/carbon nanotubes (Fe3O4-HSs/CNTs) composites were synthesized by a facile solvothermal method, without any template. Compared to the Fe3O4 hollow spheres (Fe3O4-HSs), the Fe3O4-HSs/CNTs composites showed a better suitability as anode materials for lithium-ion batteries. After 70 cycles, the Fe3O4-HSs/CNTs composites exhibited a reversible capacity of 1153.8mAhg−1 at 0.1Ag−1 as well as good cycling performance. When the current density was 0.4, 0.7 and 1.0Ag−1, the composites still displayed reversible capacity of 1038.4, 848.8 and 778.5mAhg−1, respectively. In addition, the Fe3O4-HSs/CNTs composites showed improved long-life cycling performance even at high current.
An Investigation of the Morphology Effect in Fe2o3 Anodes for Lithium Ion Batteries

Hao Liu,Guoxiu Wang

DOI: https://doi.org/10.1039/c4ta01544d

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:An investigation reveals the advantage of the hollow structure for high power lithium storage.
Synthesis and Characterization of Long Life Li4ti5o12/C Composite Using Amorphous Tio2 Nanoparticles

Baohua Li,Feng Ning,Yan-Bing He,Hongda Du,Quan-Hong Yang,Jun Ma,Feiyu Kang,Chin-Tsau Hsu

DOI: https://doi.org/10.1016/s1452-3981(23)18246-0

IF: 1.541

2011-01-01

International Journal of Electrochemical Science

Abstract:Amorphous TiO2 nanoparticles are synthesized by microemulsion method using cetyltrimethylammonium bromide (CTAB) as dispersant for the first time, and then they are used to synthesize the Li4Ti5O12/C composite by a simple solid-state method. The amorphous TiO2 nanoparticles have high reaction activity with Li2CO3 to promote the synthesis of Li4Ti5O12/C composite at lower temperature and shorter time. The grain size of prepared Li4Ti5O12/C composite with different carbon additions is less than 400 nm. The Li4Ti5O12/C composite shows high specific capacity and very long cycling life. The specific capacities of the Li4Ti5O12/C composite with 5% carbon addition at 0.1, 1 and 5 C rates are 162.4, 147.4 and 114.9 mAhg(-1), respectively, and its capacity retention after 600 cycles at 1 and 5 C rates is respective 99.86% and 92.95%. The synthesis method can be used for a mass production of Li4Ti5O12/C composite in industry.
Spinel Li4Ti5O12/C Composites as Potential Anode Materials of Lithium Batteries

Jun Rong Li,Zi Long Tang,Shao Hua Luo,Jun Biao Lu,Zhong Tai Zhang

DOI: https://doi.org/10.4028/www.scientific.net/kem.336-338.513

2007-01-01

Key Engineering Materials

Abstract:Here the spinel Li4Ti5O12/C composites were prepared by a modified high temperature solid-state reaction. The as prepared Li4Ti5O12/C composites showed enhanced electrochemical lithium insertion performance in reversible capacity and rate capabilities. The improved electrochemical properties are attributed to the reduced grain size and the improved electronic conductivity caused by the pyrolytic carbon incorporated into the spinel Li4Ti5O12 particle. The spinel Li4Ti5O12/C composites with improved electrochemical properties may find versatile applications in various energy storage devices.
Synthesis and electrochemical performance of Li4Ti5O12/TiO2/C nanocrystallines for high-rate lithium ion batteries

wenjun zhu,hui yang,wenkui zhang,hui huang,xinyong tao,yang xia,yongping gan,xingzhong guo

DOI: https://doi.org/10.1039/c5ra12397f

IF: 4.036

2015-01-01

RSC Advances

Abstract:A Li4Ti5O12/TiO2/carbon (Li4Ti5O12/TiO2/C) nanocrystalline composite has been successfully synthesized by a facile sol-gel method and subsequent calcination treatment. Moreover, pure Li4Ti5O12, Li4Ti5O12/C and Li4Ti5O12/TiO2 composites have also been synthesized for comparison. All the samples present a nanocrystalline structure with a uniform size distribution, and abundant phase interfaces can be detected for the Li4Ti5O12/TiO2 and Li4Ti5O12/TiO2/C composites. Electrochemical measurements demonstrate that the resultant Li4Ti5O12/TiO2/C composite exhibits a superior rate capability and cycle stability in comparison with pure Li4Ti5O12, Li4Ti5O12/C and Li4Ti5O12/TiO2 composites, which can be attributed to a high grain boundary density, abundant phase interfaces and in situ formed carbon, for storing extra lithium ions, enhancing rapid lithium insertion/extraction kinetics and improving the electron transport rate.
Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Ting-Feng Yi,Zi-Kui Fang,Li Deng,Lei Wang,Ying Xie,Yan-Rong Zhu,Jin-Han Yao,Changsong Dai

DOI: https://doi.org/10.1016/j.ceramint.2014.10.041

IF: 5.532

2015-01-01

Ceramics International

Abstract:Li4Ti5O12–Li2TiO3–TiO2 and pristine Li4Ti5O12 electrodes have been synthesized by a solid-state method. The structure and electrochemical performance of these as prepared powders have been characterized by X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and the galvanostatic charge–discharge test. All samples have agglomerate structure with the primary particle size of about 1µm. Electrochemical tests demonstrate that Li4Ti5O12–Li2TiO3–TiO2 (LLT5) possesses high capacity and excellent rate capability. The improved electrochemical performance of Li4Ti5O12–Li2TiO3–TiO2 (LLT5) is clearly related to the improved electronic conductivity and lithium ion diffusivity. The high cycling performance and wide discharge voltage range, as well as simple synthesis route and low synthesis cost of the Li4Ti5O12–Li2TiO3–TiO2 (LLT5) is expected to show a potential commercial application.

Synthesis and the Comparative Lithium Storage Properties of Hematite: Hollow Structures Vs. Carbon Composites

The Comparative Lithium Storage Properties of Urchin-Like Hematite Spheres: Hollow Vs. Solid

Synthesis and Lithium Storage Properties of Hollow Fe2O3/Graphene Nanocomposites

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

One-pot synthesis of hematite@graphene core@shell nanostructures for superior lithium storage

Synthesis of Porous CoFe2O4 Octahedral Structures and Studies on Electrochemical Li Storage Behavior

Synthesis and Characterization of Alpha-Fe2o3/C Composite Anode for Lithium Ion Batteries

Biomorphic Combustion Synthesis of Hematite Porous Structure with Enhanced Li Storage Properties

Synthesis and electrochemical performance of Li<sub>1+x</sub>Ti<sub>2-x</sub>Fe<sub>x</sub>(PO<sub>4</sub>)<sub>3</su b>/C anode for aqueous lithium ion battery

Heterogeneous interface in hollow ferroferric oxide/ iron phosphide@carbon spheres towards enhanced Li storage

Lithium Storage Performance of Hollow and Core/Shell TiO2 Microspheres Containing Carbon

Two-dimensional hollow carbon skeleton decorated with ultrafine Co3O4 nanoparticles for enhanced lithium storage

Cycling Reconstructed Hierarchical Nanoporous High-Entropy Oxides with Continuously Increasing Capacity for Li Storage

Hematite Hollow Spindles and Microspheres: Selective Synthesis, Growth Mechanisms, and Application in Lithium Ion Battery and Water Treatment

Facile Synthesis of Fe3O4 Hollow Spheres/carbon Nanotubes Composites for Lithium Ion Batteries with High-Rate Capacity and Improved Long-Cycle Performance

An Investigation of the Morphology Effect in Fe2o3 Anodes for Lithium Ion Batteries

Synthesis and Characterization of Long Life Li4ti5o12/C Composite Using Amorphous Tio2 Nanoparticles

Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/C Composites as Potential Anode Materials of Lithium Batteries

Synthesis and electrochemical performance of Li4Ti5O12/TiO2/C nanocrystallines for high-rate lithium ion batteries

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Synthesis and the Comparative Lithium Storage Properties of Hematite: Hollow Structures Vs. Carbon Composites

The Comparative Lithium Storage Properties of Urchin-Like Hematite Spheres: Hollow Vs. Solid

Synthesis and Lithium Storage Properties of Hollow Fe2O3/Graphene Nanocomposites

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

One-pot synthesis of hematite@graphene core@shell nanostructures for superior lithium storage

Synthesis of Porous CoFe2O4 Octahedral Structures and Studies on Electrochemical Li Storage Behavior

Synthesis and Characterization of Alpha-Fe2o3/C Composite Anode for Lithium Ion Batteries

Biomorphic Combustion Synthesis of Hematite Porous Structure with Enhanced Li Storage Properties

Synthesis and electrochemical performance of Li<sub>1+x</sub>Ti<sub>2-x</sub>Fe<sub>x</sub>(PO<sub>4</sub>)<sub>3</su b>/C anode for aqueous lithium ion battery

Heterogeneous interface in hollow ferroferric oxide/ iron phosphide@carbon spheres towards enhanced Li storage

Lithium Storage Performance of Hollow and Core/Shell TiO2 Microspheres Containing Carbon

Two-dimensional hollow carbon skeleton decorated with ultrafine Co3O4 nanoparticles for enhanced lithium storage

Cycling Reconstructed Hierarchical Nanoporous High-Entropy Oxides with Continuously Increasing Capacity for Li Storage

Hematite Hollow Spindles and Microspheres: Selective Synthesis, Growth Mechanisms, and Application in Lithium Ion Battery and Water Treatment

Facile Synthesis of Fe3O4 Hollow Spheres/carbon Nanotubes Composites for Lithium Ion Batteries with High-Rate Capacity and Improved Long-Cycle Performance

An Investigation of the Morphology Effect in Fe2o3 Anodes for Lithium Ion Batteries

Synthesis and Characterization of Long Life Li4ti5o12/C Composite Using Amorphous Tio2 Nanoparticles

Spinel Li&lt;sub&gt;4&lt;/sub&gt;Ti&lt;sub&gt;5&lt;/sub&gt;O&lt;sub&gt;12&lt;/sub&gt;/C Composites as Potential Anode Materials of Lithium Batteries

Synthesis and electrochemical performance of Li4Ti5O12/TiO2/C nanocrystallines for high-rate lithium ion batteries

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/C Composites as Potential Anode Materials of Lithium Batteries