Abstract:With the continuous development of the power grid, the high short-circuit fault current threatens the reliability of the power system. When the short-circuit current is greater than the interrupting capacity of the circuit breaker, the fault current will not be interrupted. Resistive-type superconducting fault current limiter (R-SFCL) has little loss in normal conditions. When a short-circuit fault occurs, R-SFCL can respond within a few milliseconds and limit the fault current. But the recovery time of R-SFCL is too long to satisfy the reclosing demand in the power grid. In this paper, an AC fast recovery superconducting fault current-limiting breaker (FR-SFCB) is proposed. With the operation of a fast switch connected with the superconducting coil, one of the parallel superconducting branches is disconnected, which could provide higher current limiting resistance and decrease the fault current need to be interrupted in fault conditions. Because of the shorter current flowing time, the heat generation and temperature of the advanced disconnected branch are less which can reduce the recovery time significantly. An experimental model is established based on thyristors and superconducting tapes. The effects of prospective current (I p) and the types of superconducting tapes on the current limiting resistance and recovery time of FR-SFCB are investigated. Experimental results show that with the disconnection of the flowing branch, the current limiting resistance of the proposed FR-SFCB increases to more than 3 times of the normal R-SFCL. At the same time, when the FR-SFCB resistance after current limiting is lower than the room temperature resistance, the recovery time of the flowing branch decreases by at least 50%. With access to fast switches, the proposed FR-SFCB can suppress the short-circuit fault current effectively and improve the stability of the power system.

Investigation on the development of a resistive superconducting fault current limiter

Repulsion Mechanism Applied In Resistive-Type Superconducting Fault Current Limiter

Resistive Type Superconducting Fault Current Limiter and Current Flowing Time

Electromagnetic Thermal Analysis on Variable Resistive-type Superconducting Fault Current Limiter

Heat Generation and Temperature Rise in a Resistive Type Superconducting Fault Current Limiter

Investigation on the Characteristics of a High Speed Repulsion Mechanism for Wide-Range Operation of Resistive Type SFCL

Current limiting and recovery characteristics of an AC fast recovery superconducting fault current-limiting breaker

Voltage Distribution Characteristics Of A Resistive Superconducting Fault Current Limiter In Dc Systems

Design and Evaluation of a Novel Non-Inductive Unit for a High Temperature Superconducting Fault Current Limiter (SFCL) with Bias Magnetic Field

Insulation Design Of Direct Current Resistive Type Superconducting Fault Current Limiter

Experiment Study on an Inductive Superconducting Fault Current Limiter Using No-Insulation Coils

Current-Limiting Characteristics of a Variable Resistive Type SFCL with Different Branch Lengths

Quenched Resistance Effects On A Superconducting Current-Limiting-Type Dc Breaker

A Quenching Recovery Time Test Method For Resistive Type Superconducting Fault Current Limiters Used In Dc Circuit

Numerical Simulation on Current Limiting and Recovery Characteristics of Variable Impedance Superconducting Current Limiter

Quench Propagation of YBCO Tapes of DC Superconducting Fault Current Limiter

Effects of Short-circuit Fault Current on Temperature Distribution of YBCO Tapes for DC SFCL

Topology Design and Current Limiting Characteristics of Resistance-inductor Superconducting Fault Current Limiters

Saturated-core fault current limiters for AC power systems: Towards reliable, economical and better performance application

Study On Inductive High-T-C Superconducting Fault Current Limiters

Study On Dynamic Characteristics of a Repulsion Mechanism in Superconducting Fault Current Limiter