Abstract:The big data era has arrived, and the requirements for high-speed data transmission continue to increase. It is urgent to develop new types of ultra high-speed and high-density interconnects to realize Terabit and even higher data transmission. Conventional planar interconnects such as microstrip lines, strip lines, and coplanar waveguides are in the form of open structures. Owing to the bandwidth and loss limitation, their signal integrity problems such as delays, attenuation, and crosstalk are severe and cannot transmit high-speed data when the data transmission rate is higher than a Gigabit. Based on conventional planar interconnects, SerDes (Serializer-Deserializer), differential lines, equalization, and pre-emphasis techniques were developed to improve the transmission performance. However, these techniques could not radically solve interconnect problems in high-speed data transmission. Substrate integrated waveguides (SIWs), as a new kind of planar interconnect, take advantage of the easy integration of conventional planar interconnects and the high bandwidth, low loss, and low crosstalk of waveguides. SIW interconnects have been gradually applied to realize high-speed data transmission. This paper presents all kinds of SIW interconnects, their physical structures, propagation performance, transmission modes and mechanisms, and data transmission rates in detail. Recent research studies of the authors are also introduced. According to the transmission mode, SIWs can be classified into three types: SIWs with TE mode, substrate integrated coaxial lines (SICLs) with TEM mode, and SIWs with mixed modes. The SIWs with TE mode have band-pass and hence base-band signals that should be modulated before transmission and demodulated after transmission. The introduction of modulation and demodulation techniques in SIWs increases the complexity of the transmission systems but can also improve the channel utilization and increase the data transmission rate. An SICL does not need modulation and demodulation since it propagates the TEM mode and has good signal integrity performance owing to its quasi-closed structure. SIWs with mixed modes integrate the SIW and other types of interconnects to simultaneously transmit TE mode and TEM mode by sharing conductors or media. According to the number of channels, SIWs can transmit single-channel signals through one physical channel, multichannel signals through one physical channel, or multichannel signals through multiple physical channels. Single-channel signal transmission through one physical channel uses one physical channel to transmit single-channel signals in single or multiple modes. Multichannel signal transmission through one physical channel uses one physical channel to transmit multichannel signals with complicated modulation techniques or multiple modes. Multichannel signal transmission through multiple physical channels uses multiple physical channels with single or multiple modes based on parallel data transmission. All kinds of new planar interconnects based on SIWs provide key techniques and solutions for high-speed data transmission.

QPSK Modulation and Demodulation System Using SIW Interconnect

High-speed Data Transmission System Based on QPSK Scheme in Substrate Integrated Waveguide

High-Speed Interconnect System Using QPSK Scheme Based on Substrate Integrated Waveguide

Theoretical and Experimental Investigation of HMSIW-Based High-Speed Data Transmission System Using QPSK Scheme

Photonic Implementation of 4-QAM/QPSK Electrical Modulation at Millimeter-Wave Frequency

High-Baudrate SiP and InP Modulators for Data Center Interconnects

All-optical Wavelength Conversion and Five-Channel Multicasting for 20 Gbit/s QPSK Signals in a Silicon Waveguide.

SOI Based Optical Waveguide Devices with 44gbit/s High Speed

Integrated All-Optical Wavelength Multicasting for 40 Gbit/S Pdm-Qpsk Signals Using A Single Silicon Waveguide

High-speed Data Transmission System Using Half Mode Substrate Integrated Waveguide

Substrate Integrated Waveguide Interconnects in High-Speed Electronic Systems

Integrated Wavelength Conversion for Adaptively Modulated WDM-OFDM Signals in a Silicon Waveguide

50 Gb/s Silicon QPSK Modulator with Single-Drive Push-Pull Traveling Wave Electrodes Design

High Baud Rate All-Silicon Photonics Carrier Depletion Modulators

A $W$ -Band Photonic Transmitter-Mixer Based on High-Power Near-Ballistic Uni-Traveling-Carrier Photodiodes for BPSK and QPSK Data Transmission under Bias Modulation

A New Scheme to Generate Multi-Frequency Mm-Wave Signals Based on Cascaded Phase Modulator and I/Q Modulator

A power-efficient photonic OOK and BPSK modulated Gigabit/s IR-UWB over fiber system

Optimization and Demonstration of a Large-bandwidth Carrier-depletion Silicon Optical Modulator

Optimized Silicon Qpsk Modulator with 64-Gb/s Modulation Speed

Fiber-Wireless-Fiber Link for 100-Gb/s PDM-QPSK Signal Transmission at W-Band

Design of the High-Efficiency Transmission-Type Polarization Converter Based on Substrate-Integrated Waveguide (SIW) Technology