Abstract:A high-sensitivity interferometric optical microfiber sensor based on liquid cladding is proposed to detect liquid samples temperatures in special environments. The sensor is manufactured by arc discharge and flame-brushing technology and is encapsulated in a capillary tube and covered with deionized water. The sensor is more susceptible to the influence of the external environment due to the strong evanescent field on the tapered fiber surface. High-sensitivity measurement near room temperature is important, which can be used for effective diagnosis and treatment of local temperature of biological tissues in the field of biosensing. Compared with the silica material, the sensor based on liquid encapsulation has a larger thermo-optical coefficient, and the difference between the thermo-optic coefficient of water and the optical fiber is greater. The results show that with increasing ambient temperature, the wavelength of the transmission spectrum shifts towards shorter wavelengths. The device without liquid packaging has a temperature sensitivity of −57 pm/°C, and the liquid-encapsulated microfiber can reach −415 pm/°C ranging from 30-50 °C, which is 7<sup>+</sup> times higher than the former. In addition to improving the temperature sensitivity of the sensor, the water cladding can protect the microfiber from damage. This sensor can be used as a basic sensing unit in remote and intelligent optical fiber sensor networks with great application potential in marine environment monitoring, biomedicine diagnosis and chemical reaction research.

Highly Sensitive Temperature Sensor Based on D-Shaped Microfiber with High Birefringence

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

High-sensitivity Temperature Sensor Based on a Droplet-Like Fiber Circle

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Micro-nano Fiber Sensor with High Sensitivity for Temperature Measurement.

Highly-sensitive temperature sensor based on an all-in-fiber directional coupler

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

Temperature Sensors Operating Near The Dispersion Turning Point Of Microfiber Based Two-Mode Fiber

An Ultra-High-Resolution Bending Temperature Decoupled Measurement Sensor Based on a Novel Core Refractive Index-like Linear Distribution Doped Fiber

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

A Highly Sensitive Photonic Crystal Fiber Temperature Sensor Based on Sagnac Interferometer with Full Liquid Filling

A Highly Sensitive Temperature Sensor Based on A Liquid-Sealed S-Tapered Fiber

High-temperature Sensor Based on Resonant Reflection in Hollow Core Fiber