Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

Morphology Evolution in High‐Performance Polymer Solar Cells Processed from Nonhalogenated Solvent

Morphology-performance relationships in high-efficiency all-polymer solar cells

Enhanced Performance of P3HT-based Non-Fullerene Polymer Solar Cells by Optimizing Film Morphology Using Non-Halogenated Solvent

Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases

Morphology evolution via solvent optimization enables all-polymer solar cells with improved efficiency and reduced voltage loss

Morphology evolution with polymer chain propagation and its impacts on device performance and stability of non-fullerene solar cells

An Optimized Fibril Network Morphology Enables High‐Efficiency and Ambient‐Stable Polymer Solar Cells

Non-halogenated Solvents for Environmentally Friendly Processing of High-Performance Bulk-Heterojunction Polymer Solar Cells

Morphology control for polymer solar cells via nonthermal annealing approach

Delicately Controlled Polymer Orientation for High-Performance Non-Fullerene Solar Cells with Halogen-Free Solvent Processing.

Morphology Control Realizes Fast Charge Dissociation and Transport in High-Performance All-Polymer Solar Cells

Evolved phase separation toward balanced charge transport and high efficiency in polymer solar cells.

Toward High Efficiency Polymer Solar Cells: Influence of Local Chemical Environment and Morphology

Optimization Of Processing Solvent And Film Morphology To Achieve Efficient Non-Fullerene Polymer Solar Cells Processed In Air

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Sequential deposition: optimization of solvent swelling for high-performance polymer solar cells.

Rationalization of the Selectivity in the Optimization of Processing Conditions for High-Performance Polymer Solar Cells Based on the Polymer Self-Assembly Ability

Molecular Design and Morphology Control Towards Efficient Polymer Solar Cells Processed Using Non‐aromatic and Non‐chlorinated Solvents

Engineering the Morphology Via Processing Additives in Multiple All-Polymer Solar Cells for Improved Performance

Fine Optimization of Morphology Evolution Kinetics with Binary Additives for Efficient Non-Fullerene Organic Solar Cells

Enabling High Efficiency of Hydrocarbon‐Solvent Processed Organic Solar Cells through Balanced Charge Generation and Non‐Radiative Loss