Highly Efficient Solid Polymer Electrolytes Using Ion Containing Polymer Microgels

Suting Yan,Jianda Xie,Qingshi Wu,Shiming Zhou,Anqi Qu,Weitai Wu

DOI: https://doi.org/10.1039/c4py01603c

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:A solid polymer electrolyte fabricated using ion containing microgels manifests high ionic conductivity for potential use in lithium batteries.

What problem does this paper attempt to address?

Superionic Bifunctional Polymer Electrolytes for Solid‐State Energy Storage and Conversion (adv. Mater. 4/2023)

Ruiyang Wang,Seungwon Jeong,Hyeonseong Ham,Jihoon Kim,Hojun Lee,Chang Yun Son,Moon Jeong Park

DOI: https://doi.org/10.1002/adma.202370027

IF: 29.4

2023-01-01

Advanced Materials

Abstract:Polymer Electrolytes In article number 2203413, Chang Yun Son, Moon Jeong Park, and co-workers establish a platform for innovative electrolyte technologies to achieve superionic conduction from solid-state polymer electrolytes. Through the rational design of bifunctional polymers capable of unique intra-monomer hydrogen bonding, interconnected rod-like ion channels are formed in the glassy polymer matrix, which enables a high ionic conductivity of 10−3 S cm−1 and high storage modulus of ca. 100 MPa at 25 °C.
Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Yihe Wang,Yu Tian,Diana Estevez,Hua-Xin Peng,Faxiang Qin

DOI: https://doi.org/10.1016/j.jpowsour.2021.230127

IF: 9.2

2021-01-01

Journal of Power Sources

Abstract:Solid polymer electrolytes are potential replacement of liquid electrolytes due to their much less flammability and leakage. Among them, poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-based electrolytes have several advantages including improved processability and electrochemical stability. Unfortunately, poor ionic conductivity and mechanical properties due to high plasticizer concentration hinder their practical applications. Herein, we address these issues by exploiting the solvation effect in the electrolyte through tuning the amount of residual N-methyl-2-pyrrolidone (NMP) and lithium salts. Moreover, by blending with porous carbon (PC) the mechanical integrity of the PVDF-HFP electrolytes is substantially enhanced due to improved interfacial bonding and specific surface area. The appropriate value of electrical conductivity and highly porous morphology of PC also meet the ionic transport and electronic insulation requirements. With the absorbed residual NMP as plasticizer and complexed with Li ions to formLi[NMP](3)(+) , ionic conductivity and amorphicity are improved. By elucidating the solvent and salt concentration interplay, Li-ion conductivity of up to 0.56 mS cm(-,) wide electrochemical window of 5 V versus Li/Li+ and 1000 h of cycling stability (versus Li, 0.2 mA/cm(2)) are obtained. These findings afford a novel electrolyte design guideline for enhancing interfacial compatibility and cycling through hybridization and ion solvation to develop practical lithium batteries.
Plasmids carrying oriC can integrate at or near the chromosome origin of Escherichia coli in the absence of a functional recA product.

M. Masters,V. Andrésdóttir,H. Wolf‐Watz

DOI: https://doi.org/10.1101/SQB.1979.043.01.118

Cold Spring Harbor Symposia on Quantitative Biology

Abstract:
A Flexible Solid Polymer Electrolyte based Polymerized Ionic Liquid for High Performance Solid‐State Batteries

Yuxiang Liu,Furui Ma,Wenpeng Li,Ligang Gai,Haohua Yang,Zengqi Zhang

DOI: https://doi.org/10.1002/batt.202300056

2023-04-27

Batteries & Supercaps

Abstract:Solid polymer electrolytes (SPEs) combine the benefits of ceramic electrolyte and polymer electrolyte, and have broad application prospects in high‐energy lithium metal batteries. However, low Li+ conductivity and tensile strength are crucial elements that hinder the application of solid polymer electrolytes. In this paper, an effective solid polymer electrolyte was proposed to solve these problems. A polymerized ionic liquid (PIL) was chosen as the ionic transport material to synthesize three‐dimensional cross‐linked ion channels through thermal polymerization, which can effectively improve the ionic conductivity. This work is different from some other reports that add ionic liquid without C=C double bond. We used the vinyl ionic liquid (IL) as matrix via polymerization with azobis initiator (AIBN) and the obtained co‐polymer has excellent flexibility and non‐flowing character. Li6.4La3Zr1.4Ta0.6O12 (LLZTO) ceramic filler was added to enhance the thermal stability and tensile strength of the electrolyte. Meanwhile, solid‐state batteries (SSBs) assembled with LiFePO4 cathode and high‐voltage LiNi0.8Co0.1Mn0.1O2 cathode can deliver remarkable cell performance. This work presents an appropriate device for the structure of modern polymerized ionic liquid solid polymer electrolytes, and shows significant implication for the progress of high‐property polymer electrolytes. A solid polymer electrolytes (SPEs) with polymerized ionic liquid and LLZTO was prepared by common solution casting method. Solid‐state batteries assembled with it displayed excellent charge‐discharge performance and cycling stability.

materials science, multidisciplinary,electrochemistry
Advanced Polymer Electrolyte with Enhanced Electrochemical Performance for Lithium-Ion Batteries: Effect of Nitrile-Functionalized Ionic Liquid

Xiaoli Zhan,Jiawen Zhang,Mingzhu Liu,Jianguo Lu,Qinghua Zhang,Fengqiu Chen

DOI: https://doi.org/10.1021/acsaem.8b01733

IF: 6.4

2019-02-21

ACS Applied Energy Materials

Abstract:High-voltage electrode materials are beneficial for developing high-power-density lithium-ion batteries. The anodic voltage stability of electrolytes is a major challenge for high-voltage lithium batteries. Herein, a polysiloxane-based solid polymer electrolyte is fabricated by grafting ionic liquid and poly(ethylene oxide) chains onto flexible polysiloxane backbone. An ionic liquid with a strong electron-withdrawing nitrile group and a positively charged imidazole possesses good resistance against anodic oxidation, which endows the solid polymer electrolyte with a wide electrochemical window. The electrolyte integrates advantages of ionic liquid and poly(ethylene oxide) exhibiting a high ionic conductivity (3.56 × 10–4 S cm–1 at room temperature) and excellent resistance to dendrite growth. In addition, both Li/LiFePO4 and high-voltage Li/LiNi0.5Mn1.5O4 cells with the as-prepared solid polymer electrolyte show excellent cycling performance and superior rate capability at 30 °C. Thus, the modified polysiloxane-based electrolyte is a promising electrolyte candidate for next-generation high-energy-density batteries.

materials science, multidisciplinary,chemistry, physical,energy & fuels
High-performance quaternary polymer solid-state electrolyte via one-step casting method

Zhen-yu Wang,Cong Li,Jing-yi Li,Zhen-jiang He,Yi Cheng,Cheng Yan,Jing Mao,Ke-Hua Dai,Xia-hui Zhang,Jun-chao Zheng

DOI: https://doi.org/10.1088/1361-6463/ac7c46

2022-01-01

Abstract:Lithium-ion batteries have achieved huge success in the field of energy storage, but they use flammable electrolytes that may cause safety issue. Solid polymer electrolytes have been considered as the final solution to this safety issue, which have received many researchers' attention. However, solid polymer electrolytes still face several challenges, such as low ionic conductivity. Herein, we report a quaternary solid polymer electrolyte to achieve high ionic conductivity, which was synthesized by one-step casting method. This quaternary electrolyte contains two polymers (poly(vinylidene fluoride-co-hexafluoropropylene) and poly(ethylene oxide) diacrylate), one plasticizer (succinonitrile), and one lithium salt (lithium bis(trifluoromethane)sulfonimide). Long-chain polymer is used as matrix, and short-chain polymer and plasticizer are used to increase ionic conductivity. This quaternary electrolyte achieves a high ionic conductivity of 1.49 x 10(-4) S cm(-1) at room temperature. When assembled into coin cell with lithium iron phosphate cathode and lithium metal anode, this quaternary electrolyte achieves a capacity of 139 mAh g(-1) at 0.2 C after 50 cycles and 106 mAh g(-1) at 1 C after 160 cycles. Moreover, this facile one-step casting method provides a new route towards the development of solid polymer electrolytes.
Polymeric Electrolytes for Solid‐state Lithium Ion Batteries: Structure Design, Electrochemical Properties and Cell Performances

Gang Su,Xin Zhang,Min Xiao,Shuanjin Wang,Sheng Huang,Dongmei Han,Yuezhong Meng

DOI: https://doi.org/10.1002/cssc.202300293

IF: 8.4

2023-09-28

ChemSusChem

Abstract:The solid‐state electrolytes are keys to achieve high energy, safety and stability for lithium ion batteries. In this review, core indicators of solid polymer electrolytes are discussed in detail including ionic conductivity, interface compatibility, mechanical integrity and cycling stability. Besides, we have also summarized how above properties can be improved by the design strategy of functional monomers, groups and assembly of batteries. Structures and properties of polymers are investigated here to provide a basis for all‐solid‐state electrolyte design strategies of multi‐component polymers. Meanwhile, adjustment strategies of quasi‐solid‐state polymer electrolytes such as adding functional additives and carrying out structural design have also been investigated, aiming at solving problems caused by simply adding liquids or small molecular plasticizer. We hope that fresh and established researchers can achieve a general perspective of solid polymer electrolytes via this review, and spur more extensive interests for exploration of high‐performance lithium ion batteries.

chemistry, multidisciplinary,green & sustainable science & technology
Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries

Shuaishuai Yan,Hao Liu,Xiaoxia Chen,Yang Lu,Qingbin Cao,Kai Liu

DOI: https://doi.org/10.1007/s11426-024-2353-9

2024-10-20

Science China Chemistry

Abstract:Solid polymer electrolytes (SPEs) have attracted extensive attention by virtue of lightweight and flexible processability for solid-state lithium metal batteries (LMBs) with high energy density and intrinsic safety. However, the SPEs suffer from the trade-off effect between ionic conductivity and mechanical strength. Herein, we report an ionic solid-like conductor with high Li + conductivity and good thermal stability as the conductive phase of polymer electrolytes for advanced LMBs. Using poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) as the polymer matrix, the ionic solid-like conductor can be regarded as a solid plasticizer due to its advantages of non-fluidity and non-leakage. It increases the amorphous region and the dissociation degree of lithium salts in SPEs, while minimizing the loss of mechanical properties. As a result, the Li + conductivity of SPEs incorporating the ionic solid-like conductor is enhanced by four orders of magnitude compared to the blank PVDF-HFP-based electrolyte. The optimized SPE membranes can be processed as thin as 50 μm with a high Young's modulus of 16.8 MPa, therefore ensuring stable long-term cycling of solid-state LMBs. The Li/Li symmetric cells stably cycled for more than 750 h without short circuits, and the LiFePO 4 /Li solid-state batteries demonstrate excellent electrochemical performance over 350 cycles with a capacity retention of 82.5%. This work provides a new strategy for designing ionic solid-like conductors as solid plasticizers for high-performance polymer electrolytes.

chemistry, multidisciplinary
Solid-State, Single-Ion Conducting, Polymer Blend Electrolytes with Enhanced Li + Conduction, Electrochemical Stability, and Limiting Current Density

Mengying Yang,Thomas H. Epps

DOI: https://doi.org/10.1021/acs.chemmater.3c02389

IF: 10.508

2024-02-08

Chemistry of Materials

Abstract:The development of solid-state polymer electrolytes with high lithium conductivity is crucial for improving lithium-ion battery performance and ameliorating the safety challenges associated with current solvent-based electrolytes. Unfortunately, sluggish polymer segmental dynamics are known to constrain conductivity enhancements in solid-state polymer electrolyte systems, limiting overall performance. In this work, a glassy single-ion-conducting polymer, poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] (PLiMTFSI), was blended with a flexible polymer, poly(oligo-oxyethylene methyl ether methacrylate), and the impact of PLiMTFSI molecular weight and ion concentration on the thermal and ion-conducting behavior of blend electrolytes was investigated. High ionic conductivities approaching 1 × 10–2 S/cm at 150 °C were realized in this polymer blend electrolyte system as a result of decoupling Li+ transport from polymer segmental dynamics. The decoupled ion transport was attributed to the packing frustration of the glassy PLiMTFSIsufficient percolating free volume was generated to produce effective ion diffusion pathways. This decoupling was tunable as the ion transport could be altered from being closely coupled to the polymer segmental dynamics (Vogel–Tammann–Fulcher-like) to hopping (Arrhenius-like) by increasing the PLiMTFSI molecular weight and ion concentration. Moreover, the immobilized TFSI anion resulted in high Li+ selectivity (Li+ transference number = 0.9), high electrochemical stability (up to 4.7 V against Li+/Li), and a limiting current density of 1.8 mA/cm2 (electrolyte thickness = 0.05 cm). These features suggest that this single-ion-conducting, polymer blend electrolyte might be a promising alternative to a benchmark systemsalt-doped poly(ethylene oxide). Moreover, the above characteristics can support the battery operation at higher voltages using energy-dense Li metal anodes, with faster charging rates and enhanced energy/power densities. Overall, the results suggest that polymer chain packing frustration can be exploited to overcome the constraints of slow polymer segmental relaxations to achieve rapid and highly selective ion transport and enhanced performance in solid-state polymer electrolytes.

materials science, multidisciplinary,chemistry, physical
A Preeminent Gel Blending Polymer Electrolyte of Poly(vinylidene Fluoride-Hexafluoropropylene) -Poly(propylene Carbonate) for Solid-State Lithium Ion Batteries

Y. F. Liang,Y. Xia,S. Z. Zhang,X. L. Wang,X. H. Xia,C. D. Gu,J. B. Wu,J. P. Tu

DOI: https://doi.org/10.1016/j.electacta.2018.11.182

IF: 6.6

2018-01-01

Electrochimica Acta

Abstract:A compositive synthesis of gel polymer electrolytes by blending poly(propylene carbonate) (PPC) into poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) as a polymer host is proposed. The blending polymer is produced by a facile solution casting method and ester groups of PPC are successful introduced into PVDF-HFP. The gel polymer electrolyte displays an excellent ion conductivity of 1.18 x 10(-3) S cm(-1), broad electrochemical window up to 4.8 V (vs. Li/Li+) and outstanding electrochemical stability within rechargeable lithium batteries at room temperature. The improvement of ion conductivity is attributed to the decrease of polymer crystallizability and the increase of micro pores. The strategy of blending is promising for the modification of PVDF-HFP electrolyte and foreground application in next-generation solid energy conversion devices. (C) 2018 Elsevier Ltd. All rights reserved.
Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Fei Chen,Changxiang Guo,Honghao Zhou,Muhammad Wakil Shahzad,Terence Xiaoteng Liu,Sokolskyi Oleksandr,Jining Sun,Sheng Dai,Ben Bin Xu

DOI: https://doi.org/10.1002/smll.202106352

IF: 13.3

2022-01-20

Small

Abstract:Polymer-based solid electrolytes (PSEs) offer great promise in developing lithium metal batteries due to their attractive features such as safety, light weight, low cost, and high processability. However, a PSE-based lithium battery usually requires a relatively high temperature (60 °C or above) to complete charge and discharge due to the poor ionic conductivity of PSEs. Herein, a gel polymer electrolytes (GPEs) film with a supramolecular network structure through a facile one-step photopolymerization is designed and developed. The crosslinked structure and quadruple hydrogen bonding fulfil the GPEs with high thermal stability and good mechanical property with a maximum tensile strain of 48%. The obtained GPEs possess a high ionic conductivity of 3.8 × 10-3 S cm-1 at 25 °C and a decomposition voltage ≥ 4.6 V (vs Li/Li+ ). The cells assembled with LiFePO4 cathode and Li anode, present an initial discharge specific capacity of 155.6 mAh g-1 and a good cycling efficiency with a capacity retention rate of 81.1% after 100 charges/discharge cycles at 0.1 C at ambient temperature. This work encompasses a route to develop high performance PSEs that can be operated at room temperature for future lithium metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

Peng He,Sam Chen,Yun Young Choi,Nosang Vincent Myung,Jacob R Nykaza,Jennifer L Schaefer

DOI: https://doi.org/10.1149/2754-2734/ad2c20

2024-02-23

ECS Advances

Abstract:In-situ polymerization is a method for fabricating lithium-ion batteries to contain solid or gel electrolytes without major manufacturing changes. Gel polymer electrolytes (GPEs) wherein some polymer in incorporated, decreasing the volume of liquid electrolyte, have been pursued as they may be safer. One challenge with GPEs is reduced ion transport properties. In this work, macromonomers with different chain chemistry and ionic monomers are crosslinked on electrospun polyvinylidene difluoride (PVDF) in the presence of solvents, without conventional salt, to in-situ fabricate GPEs with elevated transference number within coin cells. These GPEs would be single-ion conductors in the case of complete ionic monomer polymerization to the crosslinked network. The effect of chain chemistry and the percentage of macromonomers and ionic monomers in the GPEs on conductivity are investigated. It is found that poly(siloxane) diacrylate (PDMSDA)- and perfluoropolyether tetra-acrylate (PFPETA)-based GPEs outperform the poly(propylene glycol) diacrylate (PPGDA)- and poly(tetrahydrofuran) diacrylate (PTHFDA)-based GPEs in terms of ionic conductivity. The highest ionic conductivity was achieved for a PDMSDA-based GPE at 4.2 × 10-4 S/cm at 23°C. Graphite/NMC-811 full cells prepared with the in-situ polymerized PDMSDA-based GPEs show capacity retention of 82.6% after 100 cycles, albeit with limited electrode utilization due to ion transport limitations.
A Healable Quasi‐Solid Polymer Electrolyte with Balanced Toughness and Ionic Conductivity

Li Ding,Yu Tan,Guiliang Li,Kaiqiang Zhang,Xu Wang

DOI: https://doi.org/10.1002/chem.202400584

2024-03-09

Chemistry - A European Journal

Abstract:Solid polymer electrolytes (SPEs) have garnered extensive attention as potential alternatives to traditional liquid electrolytes, primarily due to their prowess in curbing lithium dendrite formation and preventing electrolyte leaks. The quest for SPEs that are both mechanically robust and exhibit superior ionic conductivity has been vigorous. However, achieving a harmonious balance between these two attributes remains a significant challenge. In this study, we introduce a novel quasi‐solid electrolyte, ingeniously crafted from a poly(urethane‐urea) network, enriched with lithium salts and plasticizers. This innovative composition not only boasts remarkable toughness but also ensures commendable ionic conductivity. Our post‐gelation method yields gel polymer electrolytes that undergo rigorous evaluation, leading to an optimized version that stands out with its exceptional room‐temperature ionic conductivity (2.94 × 10‐4 S cm‐1) and outstanding toughness (11.9 MJ m‐3). Moreover, it demonstrates a broad electrochemical window (4.73 V), remarkable stability across a 600‐hour cycle test, a high capacity retention exceeding 80% after 100 cycles at 0.2 C, and a noteworthy self‐healing capability. This quasi‐solid polymer electrolyte emerges as a promising contender to replace current liquid electrolyte solutions.

chemistry, multidisciplinary
Advanced inorganic/polymer hybrid electrolytes for all-solid-state lithium batteries

Xiaoyu Ji,Yiruo Zhang,Mengxue Cao,Quanchao Gu,Honglei Wang,Jinshan Yu,Zi-Hao Guo,Xingui Zhou,Zhou, Xingui

DOI: https://doi.org/10.1007/s40145-022-0580-8

IF: 11.534

2022-05-15

Journal of Advanced Ceramics

Abstract:Solid-state batteries have become a frontrunner in humankind's pursuit of safe and stable energy storage systems with high energy and power density. Electrolyte materials, currently, seem to be the Achilles' heel of solid-state batteries due to the slow kinetics and poor interfacial wetting. Combining the merits of solid inorganic electrolytes (SIEs) and solid polymer electrolytes (SPEs), inorganic/polymer hybrid electrolytes (IPHEs) integrate improved ionic conductivity, great interfacial compatibility, wide electrochemical stability window, and high mechanical toughness and flexibility in one material, having become a sought-after pathway to high-performance all-solid-state lithium batteries. Herein, we present a comprehensive overview of recent progress in IPHEs, including the awareness of ion migration fundamentals, advanced architectural design for better electrochemical performance, and a perspective on unconquered challenges and potential research directions. This review is expected to provide a guidance for designing IPHEs for next-generation lithium batteries, with special emphasis on developing high-voltage-tolerance polymer electrolytes to enable higher energy density and three-dimensional (3D) continuous ion transport highways to achieve faster charging and discharging.

materials science, ceramics
Rational design of a topological polymeric solid electrolyte for high-performance all-solid-state alkali metal batteries

Yun Su,Xiaohui Rong,Ang Gao,Yuan Liu,Jianwei Li,Minglei Mao,Xingguo Qi,Guoliang Chai,Qinghua Zhang,Liumin Suo,Lin Gu,Hong Li,Xuejie Huang,Liquan Chen,Binyuan Liu,Yong-Sheng Hu

DOI: https://doi.org/10.1038/s41467-022-31792-5

IF: 16.6

2022-07-19

Nature Communications

Abstract:Abstract Poly(ethylene oxide)-based solid-state electrolytes are widely considered promising candidates for the next generation of lithium and sodium metal batteries. However, several challenges, including low oxidation resistance and low cation transference number, hinder poly(ethylene oxide)-based electrolytes for broad applications. To circumvent these issues, here, we propose the design, synthesis and application of a fluoropolymer, i.e., poly(2,2,2-trifluoroethyl methacrylate). This polymer, when introduced into a poly(ethylene oxide)-based solid electrolyte, improves the electrochemical window stability and transference number. Via multiple physicochemical and theoretical characterizations, we identify the presence of tailored supramolecular bonds and peculiar morphological structures as the main factors responsible for the improved electrochemical performances. The polymeric solid electrolyte is also investigated in full lithium and sodium metal lab-scale cells. Interestingly, when tested in a single-layer pouch cell configuration in combination with a Li metal negative electrode and a LiMn 0.6 Fe 0.4 PO 4 -based positive electrode, the polymeric solid-state electrolyte enables 200 cycles at 42 mA·g −1 and 70 °C with a stable discharge capacity of approximately 2.5 mAh when an external pressure of 0.28 MPa is applied.

multidisciplinary sciences
A poly(1,3-dioxolane) based deep-eutectic polymer electrolyte for high performance ambient polymer lithium battery

Yanqing Wang,Rui Xu,Bowen Xiao,Dong Lv,Yu Peng,Yun Zheng,Yanghuan Shen,Jingchao Chai,Xiaohua Lei,Shiyu Luo,Xinyi Wang,Xinmiao Liang,Jiwen Feng,Zhihong Liu

DOI: https://doi.org/10.1016/j.mtphys.2022.100620

IF: 11.021

2022-01-01

Materials Today Physics

Abstract:Solid-state polymer electrolytes have recently drawn intense attention as alternatives to traditional liquid electrolytes in lithium batteries due to their high energy-density and reliable safety. Unfortunately, current all-solid-state polymer electrolytes suffer from the low ionic conductivity, limiting the power density of energy storage batteries. Here, we propose a deep-eutectic electrolyte, formed directly by the interaction between poly (1,3-dioxolane) and lithium salt without other auxiliary solvents. The ionic conductivity of the designed deep-eutectic polymer electrolyte can approach to 1.5 × 10−5 S/cm at ambient temperature, which is twenty times higher than that of polyethylene oxide-based electrolytes. Specifically, solid-state NMR verifies the interaction between oxygen in poly (1,3-dioxolane) and lithium ion. The LiFePO4/Li battery assembled with deep-eutectic polymer electrolyte delivers a discharge capacity of 139.6 mAh/g at 0.1 C and a capacity retention of 90% after 200 cycles at 0.2 C. Pouch LiFePO4/Li batteries also present excellent safety performances. This finding provides a new approach for materials engineering of polymer electrolytes for advanced lithium batteries.

materials science, multidisciplinary,physics, applied
Solid-state polymer electrolytes for high-performance lithium metal batteries

Snehashis Choudhury,Sanjuna Stalin,Duylinh Vu,Alexander Warren,Yue Deng,Prayag Biswal,Lynden A. Archer

DOI: https://doi.org/10.1038/s41467-019-12423-y

IF: 16.6

2019-09-27

Nature Communications

Abstract:Abstract Electrochemical cells based on alkali metal anodes are receiving intensive scientific interest as potentially transformative technology platforms for electrical energy storage. Chemical, morphological, mechanical and hydrodynamic instabilities at the metal anode produce uneven metal electrodeposition and poor anode reversibility, which, are among the many known challenges that limit progress. Here, we report that solid-state electrolytes based on crosslinked polymer networks can address all of these challenges in cells based on lithium metal anodes. By means of transport and electrochemical analyses, we show that manipulating thermodynamic interactions between polymer segments covalently anchored in the network and “free” segments belonging to an oligomeric electrolyte hosted in the network pores, one can facilely create hybrid electrolytes that simultaneously exhibit liquid-like barriers to ion transport and solid-like resistance to morphological and hydrodynamic instability.

multidisciplinary sciences
Ionic Conduction in Polymer‐Based Solid Electrolytes

Zhuo Li,Jialong Fu,Xiaoyan Zhou,Siwei Gui,Lu Wei,Hui Yang,Hong Li,Xin Guo

DOI: https://doi.org/10.1002/advs.202201718

IF: 15.1

2023-01-26

Advanced Science

Abstract:This article reviews the ionic conduction mechanisms and optimization strategies of polymer‐based solid electrolytes, including solvent‐free polymer electrolytes, composite polymer electrolytes, and quasi‐solid/gel polymer electrolytes, while the ion‐pair dissociation, ion mobility, polymer relaxation, and interactions at polymer/filler interfaces are highlighted. Good safety, high interfacial compatibility, low cost, and facile processability make polymer‐based solid electrolytes promising materials for next‐generation batteries. Key issues related to polymer‐based solid electrolytes, such as synthesis methods, ionic conductivity, and battery architecture, are investigated in past decades. However, mechanistic understanding of the ionic conduction is still lacking, which impedes the design and optimization of polymer‐based solid electrolytes. In this review, the ionic conduction mechanisms and optimization strategies of polymer‐based solid electrolytes, including solvent‐free polymer electrolytes, composite polymer electrolytes, and quasi‐solid/gel polymer electrolytes, are summarized and evaluated. Challenges and strategies for enhancing the ionic conductivity are elaborated, while the ion‐pair dissociation, ion mobility, polymer relaxation, and interactions at polymer/filler interfaces are highlighted. This comprehensive review is especially pertinent for the targeted enhancement of the Li‐ion conductivity of polymer‐based solid electrolytes.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
A strongly complexed solid polymer electrolyte enables stable solid state high-voltage lithium metal battery

Hangchao Wang,Jin Song,Kun Zhang,Qiu Fang,Yuxuan Zuo,Tonghuan Yang,Yali Yang,Chuan Gao,Xuefeng Wang,Quanquan Pang,Dingguo Xia

DOI: https://doi.org/10.1039/d2ee02904a

2022-10-13

Energy and Environmental Sciences

Abstract:A solid-state electrolyte with a wide electrochemical window, high Li-ion conductivity, and anti-dendrite growth proper-ties are required for high-energy-density solid-state batteries. Here, we reported on a polyglycol oxide-based solid elec-trolyte constructed by incorporating a deep eutectic solvent within a dual crosslinked network. The combination of N-methylurea shielding the active ether group in the polyglycol chain and the quadruple hydrogen bond interactions result in the formation of an all solid polyglycol oxide-based electrolyte (ASPE) with an electrochemical window of 5.2 V. The newly developed ASPE demonstrates high ionic conductivity, uniform Li deposition, and high Li plating/stripping efficien-cies. Facile in situ polymerization applications of ASPE in Li–LiFePO4, Li–LiCoO2, and Li–Li1.2Ni0.13Co0.13Mn0.54O2 batteries further show the diversity of the ASPE and its ability to achieve a high Coulombic efficiency and long life. Our finding de-viates from the conventional wisdom of designing polymer electrolytes, demonstrating a promising direction for safe, high-energy, and long-life solid-state Li metal batteries.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Click chemistry-initiated highly uniform semi-interpenetrating polymer electrolyte with dual salts for high-performance lithium metal batteries

Liying Tian,Zhenghao Yang,Shiyi Yuan,Cheng-Tien Hsieh,Meihuang Wang,Yu Cao,Bo Niu,Yayun Zhang,Panpan Dong,Donghui Long

DOI: https://doi.org/10.1016/j.jpowsour.2023.232884

IF: 9.2

2023-03-11

Journal of Power Sources

Abstract:Solid-state lithium metal batteries built with polymer electrolytes are attractive owing to their high energy density, easy manufacturing, and high safety. However, polymer electrolytes' low ionic conductivity and poor interfacial stability seriously restrict their practical application. Herein, we designed a highly uniform semi-interpenetrating polymer network electrolyte (SIPE) based on thiol–ene click chemistry. This SIPE embedded with linear poly(ethylene glycol) dimethyl (PEGDME) short chains achieves good ionic conductivity (1.78 × 10 −4 S cm −1 at 30 °C), low activation energy (0.21 eV), and high lithium-ion transference number (0.53). The thiol–ene click reaction-initiated network effectively promotes homogenous distribution of PEGDME nanodomain in polymer matrix. Therefore, short PEG chains can activate the segmental motion of polymer matrix, provide strong Li + -coordination for fast diffusion, and thus facilitate the dissociation of more lithium salts. We demonstrate a dual-salt of LiTFSI and LiDFOB salt in SIPE (D-SIPE), which contributes to a rigid and stable LiF-rich solid electrolyte interphase towards electrodes. The D-SIPE-based cell achieves improved specific capacity and cyclability when tested in solid-state Li metal batteries with LiFePO 4 cathode. This work provides a strategy for rationally designing polymer electrolytes and broadening the application of click chemistry in solid-state lithium metal batteries.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical

Highly Efficient Solid Polymer Electrolytes Using Ion Containing Polymer Microgels

Superionic Bifunctional Polymer Electrolytes for Solid‐State Energy Storage and Conversion (adv. Mater. 4/2023)

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Plasmids carrying oriC can integrate at or near the chromosome origin of Escherichia coli in the absence of a functional recA product.

A Flexible Solid Polymer Electrolyte based Polymerized Ionic Liquid for High Performance Solid‐State Batteries

Advanced Polymer Electrolyte with Enhanced Electrochemical Performance for Lithium-Ion Batteries: Effect of Nitrile-Functionalized Ionic Liquid

High-performance quaternary polymer solid-state electrolyte via one-step casting method

Polymeric Electrolytes for Solid‐state Lithium Ion Batteries: Structure Design, Electrochemical Properties and Cell Performances

Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries

Solid-State, Single-Ion Conducting, Polymer Blend Electrolytes with Enhanced Li + Conduction, Electrochemical Stability, and Limiting Current Density

A Preeminent Gel Blending Polymer Electrolyte of Poly(vinylidene Fluoride-Hexafluoropropylene) -Poly(propylene Carbonate) for Solid-State Lithium Ion Batteries

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

A Healable Quasi‐Solid Polymer Electrolyte with Balanced Toughness and Ionic Conductivity

Advanced inorganic/polymer hybrid electrolytes for all-solid-state lithium batteries

Rational design of a topological polymeric solid electrolyte for high-performance all-solid-state alkali metal batteries

A poly(1,3-dioxolane) based deep-eutectic polymer electrolyte for high performance ambient polymer lithium battery

Solid-state polymer electrolytes for high-performance lithium metal batteries

Ionic Conduction in Polymer‐Based Solid Electrolytes

A strongly complexed solid polymer electrolyte enables stable solid state high-voltage lithium metal battery

Click chemistry-initiated highly uniform semi-interpenetrating polymer electrolyte with dual salts for high-performance lithium metal batteries