Abstract:Most microbial fuel cells (MFCs) based sensors rely on exoelectrogenic bacteria to sense contaminants. However, these sensors cannot monitor repeated pollutions unless the exoelectrogenic bacteria are recovered or reinoculated. To overcome this drawback, a novel sediment microbial fuel cell (SMFC) based sensor was developed for online and in situ monitoring of repeated Cu2+ shocks to the overlaying water of paddy soil. The SMFC sensor was operated for a period of eight months in the field environment and a group of CuCl2 solutions ranging from 12.5 to 400mg L-1 Cu2+ were repeatedly applied on sunny and rainy days in different seasons. Results show that the SMFC sensor generates one voltage peak in less than 20 s after each Cu2+ shock, regardless of the seasons and weather conditions, and the voltage increments frombaseline to peak exhibit linear correlation (R-2 > 0.92) with the logarithm of Cu2+ concentrations. Repeated Cu2+ pollutions do not decrease the baseline voltage, indicating that the activity of exoelectrogenic bacteriawas not significantly inhibited. Soil adsorbed and inactivated approximately 99% of total Cu2+. Only1% of total Cu2+ was the toxic exchangeable fraction, of which the concentrations were 0.73, 0.23, and 0.22 mg kg(-1) in the surface (0-3 cm), middle (3-6 cm), and bottom (6-11 cm) layers, respectively. The abundance of 16S rRNA gene transcripts of exoelectrogenic bacteria-associated genera is the lowest in the surface layer (2.86 x 10(11) copies g(-1)) and the highest in the bottom layer (7.99 x 10(11) copies g(-1)). Geobacter, Clostridium, Anaeromyxobacter, and Bacillus are the most active exoelectrogenic bacteria-associated genera in the soil. This study suggests that the SMFC sensor could be applied inwetlands to monitor the repeated discharge of Cu2+ and other heavy metals. (c) 2020 Elsevier B.V. All rights reserved.

Assessing The Solitary And Joint Biotoxicities Of Heavy Metals And Acephate Using Microbial Fuel Cell

Microbial fuel cell (MFC)-based biosensor for combined heavy metals monitoring and associated bioelectrochemical process

Detection of Heavy Metal Toxicity Using Cardiac Cell-Based Biosensor

A Double-microbial Fuel Cell Heavy Metals Toxicity Sensor

The Evaluation of Long Term Performance of Microbial Fuel Cell Based Pb Toxicity Shock Sensor.

Enhanced Detection of Toxicity in Wastewater Using a 2D Smooth Anode Based Microbial Fuel Cell Toxicity Sensor

Effect of Cuo/Zno/Fto Electrode Properties on the Performance of a Photo-Assisted Microbial Fuel Cell Sensor for the Detection of Heavy Metals

Microbial Fuels Cell-Based Biosensor For Toxicity Detection: A Review

Visual detection of the toxicity of wastewater containing heavy metal ions using a microbial fuel cell biosensor with a Prussian blue cathode

Enhanced Quorum Sensing of Anode Biofilm for Better Sensing Linearity and Recovery Capability of Microbial Fuel Cell Toxicity Sensor.

Using Electrical Signals of Microbial Fuel Cells to Detect Copper Stress on Soil Microorganisms

A dual chamber microbial fuel cell based biosensor for monitoring copper and arsenic in municipal wastewater

Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals

[Detection of toxic substances in microbial fuel cells]

On-line Monitoring of Repeated Copper Pollutions Using Sediment Microbial Fuel Cell Based Sensors in the Field Environment.

Joint Toxicity Assessment of Heavy Metals Based on CellSense Biosensor of Bacillus Subtilis

Evaluating combined toxicity of binary heavy metals to the cyanobacterium <i>Microcystis</i>: A theoretical non-linear combined toxicity assessment method

Sequential flowing membrane-less microbial fuel cell using bioanode and biocathode as sensing elements for toxicity monitoring

Different responses of toxic substances in microbial fuel cells

Study on the Performance of Two-Compartment Microbial Fuel Cells Under Different Heavy Metal Concentrations

A Novel Microbial Fuel Cell Sensor with Biocathode Sensing Element.