Abstract:Rubber isolators are usually used to protect high-precision equipment of autonomous underwater vehicles (AUVs), avoiding damage from overlarge dynamic excitation. Considering the nonlinear properties of the rubber material, the nonlinear behavior of rubber isolators under shock exaltation is hard to be predict accurately without the available modal and accurate parameters. In view of this, the present study proposes a nonlinear model and parameter identification method of rubber isolators to present their transient responses under shock excitation. First, a nonlinear model of rubber isolators is introduced for simulating their amplitude and frequency-dependent deformation under shock excitation. A corresponding dynamic equation of the isolation system is proposed and analytically solved by the Newmark method and the Newton-arithmetic mean method. Secondly, a multilayer feed-forward neural network (MFFNN) is constructed with the current model to search the parameters, in which the differences between the estimated and tested responses are minimized. The sine-sweep and drop test are planned with MFFNN to build the parameter identification process of rubber isolators. Then, a T-shaped isolator composed of high-damping silicon rubber is selected as a sample, and its parameters were determined by the current identification process. The transient responses of the isolation system are reconstructed by the current mode with the identified parameter, which show good agreement with measured responses. The accuracy of the proposed model and parameter identification method is proved. Finally, the errors between the reconstructed responses and tested responses are analyzed, and the main mode of energy attenuation in the rubber isolator is discussed in order to provide an inside view of the current model.

Experiment on Parameter identification of a Time Delayed Vibration Absorber

Parameter-dependent Vibration-Attenuation Controller Design for Electro-Hydraulic Actuated Linear Structural Systems

Experiment on Parameter Identification of a Time Delay Coupled Nonlinear System

Identification method of vehicle parameters based on genetic algorithms

Parameter Design for a Vibration Absorber with Time-Delayed Feedback Control

Time-Delay Identification for Linear Systems: A Practical Method Using the Frequency Response Function

Study on tuning methodologies of passive vibration absorbers

Minimization of the Beam Response Using Inerter-Based Passive Vibration Control Configurations

Experimental identification method for the nonlinear vibration isolator with unsymmetrical dynamic characteristics

Random Response of Nonlinear System with Inerter-based Dynamic Vibration Absorber

Parameter identification of nonlinear systems with time-delay from time-domain data

Parameter identification of nonlinear dynamic systems with time-delayed feedback control

A Nonlinear Model and Parameter Identification Method for Rubber Isolators under Shock Excitation in Underwater Vehicles

Modelling and Tuning for a Time-Delayed Vibration Absorber with Friction

Parameter identification of non-classically damped mechanical structures in time domain

Instantaneous Modal Parameter Identification of Linear Time-Varying Systems Based on Chirplet Adaptive Decomposition

Parameter identification for stiffness and damping of active magnetic bearing in flexible rotor system

Analysis of Coupled Vibration Characteristics of Linear-Angular and Parameter Identification

Experiments and analysis for a controlled mechanical absorber considering delay effect

Numerical Study on Identification of Time Varying Parameters of Vibration Systems

IDENTIFICATION OF SYSTEM PHYSICAL PARAMETERS FOR VEHICLE SYSTEMS WITH NONLINEAR COMPONENTS