Abstract:In concrete columns confined with large rupture strain (LRS) fiber-reinforced polymers (FRPs), the LRS FRPs enhance the strength and ductility of concrete columns with the same mechanism as conventional FRPs by rendering passive lateral confinement pressure. However, LRS FRPs exhibit a strain capacity much larger than that of conventional FRPs. Notably, LRS FRPs have a bilinear material stiffness instead of the linear stiffness in conventional FRPs. Therefore, under axial compression, concrete confined by LRS FRPs will bear a different load path compared to that confined by conventional FRPs. This difference must be considered for finite element analysis (FEA) of LRS FRP-confined columns especially when the confinement pressure is non-uniform. To this aim, 23 samples of non-circular LRS FRP-confined concrete columns under axial monotonic compression were tested and analyzed. The variable test parameters are the aspect ratio (i.e., the depth (longer side) and width (shorter side) of the cross-sections, the number of LRS FRP layers, and the type of LRS FRPs. For FEA, the concrete damage plasticity module (CDPM) was calibrated by both the active confinement pressure approach and the confinement stiffness approach. The active confinement pressure approach shows that the concrete plastic flow of LRS FRP-confined concrete is dominated by the secondary stiffness of the LRS FRP jacket. For the confinement stiffness approach, the concrete plastic flow is deduced from the compressive cyclic tests of cylindrical columns confined by LRS FRP jackets as a function of confinement stiffness. Results showed that the plastic dilation angle of concrete confined by LRS FRPs changes almost three times faster than that for concrete confined by conventional FRPs. The geometrical effects are included in the obtained plastic dilation angle so that a new plastic dilation angle model becomes feasible for the FEA of non-circular LRS FRP-confined concrete columns. Utilizing this new plastic dilation angle model enables the proposed plastic damage model to capture the stress strain behavior of the non-circular columns. Moreover, the non-uniformity of plastic flow on sections is captured reasonably.

Three-dimensional finite element model for FRP-confined circular concrete cylinders under axial compression

Theoretical Model for Slender FRP-confined Circular RC Columns

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Analytical Model of Circular CFRP Confined Concrete-Filled Steel Tubular Columns under Axial Compression

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Behavior and Three-Dimensional Finite Element Modeling of Circular Concrete Columns Partially Wrapped with FRP Strips

Three-Dimensional Finite-Element Analysis of FRP-Confined Circular Concrete Columns under Eccentric Loading

FE modeling of Non-circular LRS FRP-confined concrete columns

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Design-Oriented Modeling of Circular Frp-Wrapped Concrete Columns after Sustained Axial Compression

Application of Smeared Cracking and Damaged Plasticity Models in FEA of CFT

A unified stress-strain model for LRS FRP-confined concrete columns with square and circular cross-sections

Three-dimensional finite element modeling and theoretical analysis of concrete confined with FRP rings

3D FE analysis for buckling behavior of longitudinal reinforcement embedded in LRS FRP-confined concrete under axial compression

3D Finite Element Modelling of FRP Confined Concrete Column

Modeling for complete stress-strain curve of circular concrete columns confined with steel spiral and FRP

Theoretical Model for Fiber-Reinforced Polymer-Confined Concrete

Cross-Sectional Unification on the Stress-Strain Model of Concrete Subjected to High Passive Confinement by Fiber-Reinforced Polymer