Abstract:Previous studies on laterally loaded piles in clay have mainly focused on flexible and rigid piles. Little attention has been paid to semi-rigid piles (whose pile–soil stiffness lies somewhere between those of rigid and flexible piles), which may behave as either flexible piles or rigid piles, depending on the change in soil stiffness during cycling. This study aims to understand the cyclic lateral response of a repeatedly loaded semi-rigid pile in soft clay and the failure mechanisms of the soil around the pile, through a series of centrifuge model tests and three-dimensional finite element analyses using an advanced hypoplastic clay model. Numerical parametric studies were also performed to investigate the evolution of soil flow mechanisms with increasing pile rigidity. It is revealed that the semi-rigid pile behaved as if it were a flexible pile (i.e., flexural deformation dominated) during the first few cycles, but tended to behave like a rigid pile (i.e., rotational movement prevailed) during subsequent cycles, which progressively softened the surrounding soil. As a result, the mechanisms of soil flow around the semi-rigid pile exhibited an intermediate behaviour combining the mechanisms of both flexible and rigid piles. Three distinctive mechanisms were identified: a wedge-type mechanism near the surface, a full-flow mechanism (within the transverse sections) near the middle of the pile, and a rotational soil flow mechanism (in the vertical symmetrical plane of the pile) near the lower half of the pile. By ignoring the rotational soil flow mechanism, which has a much lower resistance than the full-flow mechanism, the American Petroleum Institute code (published in 2007) underestimated the cyclic bending moment and the lateral pile displacement by 10% and 69%, respectively. Application of jet grouting around the semi-rigid pile at shallow depth significantly altered the soil flow mechanism (i.e., it was a solely wedge-type mechanism around the grouted zone).

Lateral or Torsional Failure Modes in Vertically Loaded Defective Pile Groups

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Analysis method for pile groups subjected to lateral and torsional loads

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Centrifuge modelling on tetrapod jacket foundation subjected to lateral loads

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Analysis of Pile Groups Subjected to Torsional Loading

Nonlinear Analysis of Pile Groups Subjected to Combined Lateral and Torsional Loading

Response Of 1 X 2 Pile Group Under Eccentric Lateral Loading

Cyclic Lateral Response and Failure Mechanisms of Semi-Rigid Pile in Soft Clay: Centrifuge Tests and Numerical Modelling

Response of 3×3 Pile Groups in Silt Subjected to Eccentric Lateral Loading

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Large-scale model tests of 3×3 pile group under eccentric lateral loading

Lateral Dynamic Responses of Coastal Group Piles Considering Pile‒water‒soil Interactions

Vertical response analysis at multi-points on defective pile in layered soil and its application

Experimental Study of Interaction and Coupling Effects in Pile Groups Subjected to Torsion

Elastoplastic solutions of deflections and inner forces for slightly inclined single pile subjected to combined vertical and lateral loads

Effect of Pile-Cap Connection on Behavior of Torsionally Loaded Pile Groups