Synthesis of Graphene@fe3o4@c Core–shell Nanosheets for High-Performance Lithium Ion Batteries

Zehui Zhang,Fei Wang,Qiao An,Wei Li,Peiyi Wu

DOI: https://doi.org/10.1039/c4ta06910b

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:Graphene@Fe3O4@C core–shell nanosheets are synthesized by a one-pot solvothermal method, which are promising candidates as anodes in LIB applications.

What problem does this paper attempt to address?

Graphene-Wrapped Fe3O4 Anode Material for High-Performance Lithium Ion Batteries

Yu Jiang,Zhong-Jie Jiang,Meilin Liu

DOI: https://doi.org/10.2991/ism3e-15.2015.15

2016-01-01

Abstract:The encapsulation of Fe3O4 particles in a graphene shell to form a core-shell structure is a promising way to improve the electrochemical performance of lithium ion batteries (LIBs). The continuous graphene shell may enhance the electrical conductivity of the electrodes, facilitating current collection and charge transfer associated with lithium storage. The unique shell structure may suppress the aggregation of the core Fe3O4 nanoparticles. The electrochemical results show that the graphene encapsulated Fe3O4 could exhibit significantly higher electrochemical performance and better cycling stability when used as the anode material for lithium ion batteries.
Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Xu Wang,Peng Zhang,Tong Wang,Osamu Yamamoto,Nobuyuki Imanishi,Miao Wang

DOI: https://doi.org/10.1016/j.jelechem.2018.07.001

IF: 4.598

2018-01-01

Journal of Electroanalytical Chemistry

Abstract:Mesoporous NiCo2O4 nanoneedle arrays on graphene film grown directly on a three-dimensional Ni foam have been fabricated by a facile hydrothermal method, accompanied by annealing under air atmosphere. The BET specific surface area of NiCo2O4@graphene film@Ni foam is as high as 47.65 m(2) g(-1). The porous composites served as a binder-free anode material for lithium-ion batteries display an excellent and stable electrochemical performance with high specific capacities of 1232 mAh g(-1) at the current density of 500 mA g(-1) over 100 cycles and 1493 mAh g(-1) at the current density of 1500 mA g(-1) after 230 cycles with Coulombic efficiency higher than 97%. Moreover, a fairly high rate capacity of 586 mAh g(-1) retained even at a high current density of 8000 mA g(-1). The outstanding electrochemical performance should be attributed to synergetic effect of NiCo2O4 nanoneedle arrays with mesoporous nature and high specific area as well as graphene substrate supporting, which can accommodate the volume variation during the electrochemical reactions and facilitate the ion and electron transmission.
Layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods with high reversible capacity in lithium-ion batteries.

Ning Du,Yifan Chen,Chuanxin Zhai,Hui Zhang,Deren Yang

DOI: https://doi.org/10.1039/c3nr00275f

IF: 6.7

2013-01-01

Nanoscale

Abstract:We demonstrated the layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods. FeOOH nanorods were first synthesized via a hydrothermal process, and acted as a template for subsequent layer-by-layer deposition. It was indicated that the electrostatic attraction between the charged species may play the key role in the formation of the core-shell nanostructures. When used as an anode material in lithium-ion batteries, γ-Fe2O3@SnO2@C porous core-shell nanorods showed high initial Coulombic efficiency, high reversible capacity, and good cycling and rate performances. The correlation between the structure, composition and electrochemical performance was also discussed.
Synergistic Ternary Composite (carbon/fe3 O4 @graphene) with Hollow Microspherical and Robust Structure for Li-Ion Storage.

Xingxing Li,Xueying Zheng,Jie Shao,Tian Gao,Qiang Shi,Qunting Qu

DOI: https://doi.org/10.1002/chem.201504035

2015-01-01

Chemistry - A European Journal

Abstract:The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy-storage systems. 2D graphene-wrapped hollow C/Fe3 O4 microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double-shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one-pot approach and then transformed into C/Fe3 O4 @G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS-derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe3 O4 nanoparticles embedded in it. In the rationally constructed architecture of C/Fe3 O4 @G, the strongly coupled C/Fe3 O4 hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe3 O4 , and graphene. As an anode material of Li-ion batteries (LIBs), C/Fe3 O4 @G manifests a high reversible capacity, excellent rate behavior, and outstanding long-term cycling performance (1208 mAh g(-1) after 200 cycles at 100 mA g(-1) ).
Synthesis and Characterization of Fe@Fe2O3 Core-Shell Nanoparticles/graphene Anode Material for Lithium-Ion Batteries

Chao Wu,Hong Zhang,Yong-Xin Wu,Quan-Chao Zhuang,Lei-Lei Tian,Xin-Xi Zhang

DOI: https://doi.org/10.1016/j.electacta.2014.03.068

IF: 6.6

2014-01-01

Electrochimica Acta

Abstract:Fe@Fe2O3 core-shell nanoparticles anchored on graphene (Fe@Fe2O3/graphene hybrid material) have been firstly synthesized by using a hydrothermal reaction followed by an in situ thermal reduction. The morphology and structure of the Fe@Fe2O3/graphene hybrid material are characterized by SEM, XRD, XPS, TEM, EFTEM and EDS, which show that the nanoparticles with diameters around 100nm are homogeneously anchored on the surface of graphene sheets to form three-dimensional (3D) porous structure, and the shell region with several nanometers is amorphous Fe2O3. The galvanostatic cycling test shows that the Fe@Fe2O3/graphene hybrid material displays a reversible charge capacity of 959.3 mAh·g−1 up to 90 cycles at a current density of 100 mA·g−1, which is 86.4% retention of the first charge capacity. In addition, the Fe@Fe2O3/graphene hybrid material exhibits an excellent long-life cycling performance at high currents. Furthermore, the first lithiation process of Fe@Fe2O3/graphene electrode is studied by electrochemical impedance spectroscopy (EIS) at different potentials. According to the results of equivalent circuit analysis, there appear three semicircles respectively representing the Li-ion migration in solid electrolyte interface film (SEI film) and contact problems, electrical conductivity and charge transfer in the first discharge process, and the change of kinetic parameters for lithiation process of Fe@Fe2O3/graphene electrode as a function of potential is discussed in detail.
Facile Synthesis of Fe@Fe2o3 Core-Shell Nanoparticles Attached to Carbon Nanotubes and Their Application As High Performance Anode in Lithium-Ion Batteries

Chao Wu,Quanchao Zhuang,Leilei Tian,Yongli Cui,Xinxi Zhang

DOI: https://doi.org/10.1016/j.matlet.2013.05.113

IF: 3

2013-01-01

Materials Letters

Abstract:A novel Fe@Fe2O3 core-shell nanostructure attached to carbon nanotubes was synthesized by a facile hydrothermal method, and their morphologies, structures and electrochemical performances as anode materials of lithium-ion batteries were investigated. The results showed that the Fe@Fe2O3/CNTs nanocomposites displayed a reversible capacity of 702.7mAhg−1 up to 60 cycles at a current density of 100mAg−1, and exhibited much better rate capability compared to the commercial CNTs at various rates between 100 and 1000mAg−1. The excellent lithium storage and rate capacity performance of Fe@Fe2O3/CNTs nanocomposites are ascribed to synergistic effect between the Fe@Fe2O3 core-shell nanoparticles and randomly distributed CNTs, highlighting that the importance of the maximum use of the novel Fe@Fe2O3 core-shell nanocomposites and CNTs for energy storage applications in high-performance lithium-ion batteries (LIBs).
Hybridization of Graphene Nanosheets and Carbon-Coated Hollow Fe3O4 Nanoparticles As a High-Performance Anode Material for Lithium-Ion Batteries

Yongtao Zuo,Gang Wang,Jun Peng,Gang Li,Yanqing Ma,Feng Yu,Bin Dai,Xuhong Guo,Ching-Ping Wong

DOI: https://doi.org/10.1039/c5ta09742h

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:A novel 2D H-Fe3O4@C/GNS electrode exhibits excellent cycling stability and super high rate performance.
One-Pot High Temperature Hydrothermal Synthesis Of Fe3o4@C/Graphene Nanocomposite As Anode For High Rate Lithium Ion Battery

Xiaoyong Fan,Siheng Li,Henghui Zhou,Li Lu

DOI: https://doi.org/10.1016/j.electacta.2015.09.048

IF: 6.6

2015-01-01

Electrochimica Acta

Abstract:This study develops a facile and effective methodology to synthesize carbon-coated Fe3O4/graphene composite in one-pot high temperature hydrothermal processing, which not only simplifies the synthesis procedure, but also partly avoids graphene re-stacking and aggregation of Fe3O4 nanoparticles. Fe3O4@C nanoparticles of about 50 nm are uniformly dispersed on the graphene nanosheets. The electrochemical test of the Fe3O4@C/g-raphene nanocomposite demonstrates high rate capacity. The first reversible specific capacity is 1016.6 mAhg(-1) and increases to 1199.8 mAhg(-1) after 500 cycles at 1.0 A g(-1), and the reversible specific capacity at 20.0 A g(-1) remains 52.8% of that at 0.2 A g(-1). The excellent electrochemical performance can be attributed to high extrinsic conductivity where carbon layer and graphene can provide rapid transfer channels for electrons and small particles size that can accommodate volumetric changes of Fe3O4 due to their elastic feature. In addition, the winkle structure representing a curled and corrugated morphology that the graphene owns intrinsically may also act as lithium ion rapid transfer channels. Full batteries using the Fe3O4@C/graphene nanocomposite as the anode and lithium nickel cobalt manganese oxide as the cathode show excellent cycle performance. (C) 2015 Elsevier Ltd. All rights reserved.
Active Fe2o3 Nanoparticles Encapsulated In Porous G-C3n4/Graphene Sandwich-Type Nanosheets As A Superior Anode For High-Performance Lithium-Ion Batteries

Minjie Shi,Tianhao Wu,Xuefeng Song,Jing Liu,Liping Zhao,Peng Zhang,Lian Gao

DOI: https://doi.org/10.1039/c6ta03533g

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Designing sandwich-like hybrid nanosheets with a porous structure effectively improves the electrochemical performance of graphene-based materials in lithium-ion batteries (LIBs) owing to the mitigated restack of graphene and decreased diffusion distance of Li+ ions for electron storage. Herein, a novel composite of active Fe2O3 nanoparticles encapsulated in g-C3N4/graphene hybrid nanosheets (Fe2O3/CN-G) has been developed, in which the 2D sandwich-type hybrid nanosheets constructed using porous g-C3N4 and highly conductive graphene offer readily accessible channels and sufficient conductive pathways for ionic diffusion and charge transport. This unique architecture greatly inhibits the restacking or aggregation of graphene and ensures the stability of electro-active Fe2O3 nanoparticles. Benefiting from these intriguing features, the as-prepared Fe2O3/CN-G as an anode for LIBs shows excellent electrochemical behaviors, including considerably large reversible capacity (1023 mA h g(-1)), great coulombic efficiency (97.6%), strong durability and comparable rate performance. Therefore, the work described here can provide a new insight for designing high-performance electrode materials with a porous and sandwich-type hybrid structure for application in LIBs.
Preparation of Core-Shell Si/C/Graphene Composite for High-Performance Lithium-Ion Battery Anodes

Xiaoming Zhou,Yang Liu

DOI: https://doi.org/10.1016/j.synthmet.2024.117768

IF: 4

2024-01-01

Synthetic Metals

Abstract:One of the important objectives for the development of enhanced lithium-ion batteries is developing highperformance silicon-based anodes with durable operational capability. Herein, a three-dimensional graphenedecorated core-shell Si/C composite is fabricated by the in-situ polymerization of organic pyrrole molecule and pyrolysis process, in which the melamine formaldehyde resin is subtly used as three-dimensional porous framework to offer abundant loading area for the uniform dispersion of active silicon nanoparticles. Meanwhile, the core-shell structure deriving from polypyrrole in the composite can effectively buffer the volume change of silicon ingredient and avoid the direct contact with the electrolyte during the cycling process, leading to the improved structural stability and electrochemical performance. The outermost layer of graphene nanosheets is designed to enhance the electrical conductivity of the electrode. As a result, the synthesized Si/C/graphene composite exhibits a high capacity and excellent cycling performance. This work reveals that combining a threedimensional carbon substrate with a core-shell structure might be a promising solution for anode materials with obvious volume transformation.
One-Pot Synthesis Of Carbon Coated Fe3o4 Nanosheets With Superior Lithium Storage Capability

guoxin gao,shiyao lu,bitao dong,zhicheng zhang,yuansuo zheng,shujiang ding

DOI: https://doi.org/10.1039/c4ta05725b

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:Hybrid nanosheet structures based on carbon coated metal oxides still attract promising interest as high-performance electrode materials for next-generation lithium-ion batteries (LIBs). In this study, we develop a simple one-pot solution method to synthesize large-scale flat Fe3O4 nanosheet hybrid structures coated with an amorphous carbon overlayer (denoted as Fe3O4@C NSs) followed by a thermal annealing treatment. It is found that the refluxing temperature plays an important role in adjusting the morphology of the Fe3O4@C hybrid. Increasing the temperature from 140 degrees C to 200 degrees C will lead to flower-like hybrid structures constructed by Fe3O4 nanoflakes gradually growing, rupturing, and finally evolving into flat and completely separate nanoflakes with large size at 200 degrees C. When evaluated as an anode material for LIBs, the hybrid Fe3O4@C NSs demonstrate a high reversible capacity of 1232 mA h g(-1) over 120 cycles at a current density of 200 mA g(-1), and remarkable rate capability.
One-pot synthesis of ultrafine ZnFe2O4 nanocrystals anchored on graphene for high-performance Li and Li-ion batteries

jian xie,wentao song,gaoshao cao,tiejun zhu,xinbing zhao,shichao zhang

DOI: https://doi.org/10.1039/c3ra46904b

IF: 4.036

2014-01-01

RSC Advances

Abstract:A ZnFe2O4-nanocrystals/graphene-nanosheets (ZnFe2O4/G) nanohybrid has been prepared by a facile in situ hydrothermal route using Zn(NO3)(2)center dot 6H(2)O, Fe(NO3)(3)center dot 6H(2)O and graphite oxide (GO) as the precursors. Ultrafine ZnFe2O4 nanocrystals (below 10 nm) are confined by the few-layer graphene sheets reduced from GO, forming a unique sheet-like hybrid. In this structure, the direct restacking of the hydrophobic graphene sheets is refrained by loading ZnFe2O4 nanocrystals as the spacers and the aggregation of ZnFe2O4 nanocrystals is inhibited by the dispersing and confining effects of the graphene sheets. ZnFe2O4/G shows excellent rate capability and high-rate cycling stability for lithium storage. It also shows a high capacity when used as an anode for a ZnFe2O4/G-LiFePO4/C full cell.
Synthesis of Graphene-Wrapped ZnMn2O4 Hollow Microspheres As High Performance Anode Materials for Lithium Ion Batteries

Tong Zhang,Huijuan Yue,Hailong Qiu,Kai Zhu,Lijie Zhang,Yingjin Wei,Fei Du,Gang Chen,Dong Zhang

DOI: https://doi.org/10.1039/c5ra16667e

IF: 4.036

2015-01-01

RSC Advances

Abstract:A facile method for the synthesis of graphene-wrapped ZnMn2O4 hollow microspheres which show excellent electrochemical performance.
Nano electrochemical reactors of Fe2O3 nanoparticles embedded in shells of nitrogen-doped hollow carbon spheres as high-performance anodes for lithium-ion batteries.

Fangcai Zheng,Mengni He,Yang Yang,Qianwang Chen

DOI: https://doi.org/10.1039/c4nr06321j

IF: 6.7

2015-01-01

Nanoscale

Abstract:Iron oxides are extensively investigated as anode materials for lithium-ion batteries (LIBs) because of their large specific capacities. However, they undergo huge volume changes during cycling that result in anode pulverization and loss of electrical connectivity. As a result, the capacity retention of the iron oxide anodes is poor and should be improved for commercial applications. Herein, we report the preparation of ultrasmall Fe2O3 nanoparticles embedded in nitrogen-doped hollow carbon sphere shells (Fe2O3@N-C) by the direct pyrolysis of Fe-based zeolitic imidazolate frameworks (Fe-ZIF) at 620 degrees C in air. As an anode material for LIBs, the capacity retained was 1573 mA h g(-1) after 50 cycles at a current density of 0.1 C (1 C = 1000 mA g(-1)). Even undergoing the high-rate capability test twice, it can still deliver a remarkably reversible and stable capacity of 1142 mA h g(-1) after 100 cycles at a current density of 1 C. The excellent electrochemical performance is attributed to the unique structure of ultrasmall Fe2O3 nanoparticles uniformly distributed in the shell of nitrogen-doped carbon spheres, which simultaneously solve the major problems of pulverization, facilitate rapid electrochemical kinetics, and effectively avoid the aggregation of Fe2O3 nanoparticles during de/lithiation. The novel method developed in this work for the synthesis of functional hybrid materials can be extended to the preparation of various MOFs-derived functional nanocomposites owing to the versatility of links and metal centers in MOFs.
Layer-by-layer Self-Assembly of Graphene-Like Co3O4 Nanosheet/graphene Hybrids: Towards High-Performance Anode Materials for Lithium-Ion Batteries

Qian Yang,Jun Wu,Kai Huang,Ming Lei,Wenjun Wang,Shasha Tang,Peijie Lu,Yakun Lu,Jun Liu

DOI: https://doi.org/10.1016/j.jallcom.2016.01.136

IF: 6.2

2016-01-01

Journal of Alloys and Compounds

Abstract:We have successfully synthesized graphene-like Co(OH)(2) and fabricated sandwich-like Co(OH)(2)/graphene hybrids by the electrostatic self-assembly. After annealing at low temperatures, we further fabricated Co3O4 nanosheet/graphene hybrids, in which the thickness of graphene-like Co3O4 nanosheets is only similar to 5 nm. The as-prepared product exhibits a very high reversible lithium storage capacity up to 982.6 mAh g(-1) after 50 cycles, while pure Co3O4 nanosheets only show the discharge capacity of 108 mAh g(-1) after 50 cycles. Moreover, in comparison with the reported results, it exhibits an ultrahigh rate capability of 209.7 mAh g(-1) at 5000 mA g(-1). The greatly improved electrochemical performances may be ascribed to the sandwich-like structure of ultrathin Co3O4 nanosheet/graphene. (c) 2016 Elsevier B.V. All rights reserved.
Fe3O4 Contribution to Core–Shell Structured Si@C Nanospheres As High-Performance Anodes for Lithium-Ion Batteries

Yuxuan Zheng,Junkai Ma,Xinping He,Yongping Gan,Jun Zhang,Yang Xia,Wenkui Zhang,Hui Huang

DOI: https://doi.org/10.1007/s11664-022-10153-4

IF: 2.1

2023-01-01

Journal of Electronic Materials

Abstract:Silicon/carbon composites have been considered as the anode material of choice for improving the energy density of lithium-ion batteries (LIBs). The carbon-based matrices not only can provide a conductive network for Si, but can also mitigate the bulk expansion of Si. However, the Si/C anode also has obvious disadvantages, such as a complicated preparation process and unstable solid–electrolyte interface (SEI) film, which leads to low initial coulombic efficiency and poor cycle life. In this study, ferrocene was successfully used as the sole source of Fe 3 O 4 and carbon to prepare a core–shell structured Si@Fe 3 O 4 @C composite by wrapping a Fe 3 O 4 @C layer on the Si surface under hydrothermal action. The synthesized Si@Fe 3 O 4 @C composite exhibits excellent cycling stability (1026 mA h g −1 after 500 cycles at 1 A g −1 ) and rate performance (744 mA h g −1 at 4 A g −1 ). The good electrochemical performance can be ascribed to Fe 3 O 4 nanoparticles embedded into the carbon layer, which effectively improves the electronic conductivity and interfacial stability of Si@C anode materials.
Core-shell Mn3O4 Nanorods with Porous Fe2O3 Layer Supported on Graphene Conductive Nanosheets for High-Performance Lithium Storage Application

Mingyue Wang,Ying Huang,Yade Zhu,Meng Yu,Xiulan Qin,Hongming Zhang

DOI: https://doi.org/10.1016/j.compositesb.2019.03.037

2019-01-01

Abstract:In this study, a core-shell nanostructure Fe2O3 coated grass-like Mn3O4 supported on graphene has been designed and fabricated via a facile and convenient hydrothermal method and thermal treatment routes. The Fe2O3 coated Mn3O4 nanorods with diameter of 35-40 nm are convolved by flexible graphene, which form a three-dimensional conductive network. As an anode for lithium-ion batteries, the as-prepared composite delivers an initial discharge/charge capacity of 1939.2/1393.5 mAh g(-1) with a promising coulombic efficiency of 71.9% and a reversible specific capacity of 795.4 mA g(-1) after 400 cycles at a high current density, which exhibits an upward trend in the capacity after long-term cycling as well. Both of the cross-linked structure and the synergistic effect are contributed to the enhance lithium-storage performance and dynamic characteristic, which reveals that the electrode holds a great potential as an anode material for rechargeable Li-ion batteries.
Synthesis of interconnected mesoporous ZnCo2O4 nanosheets on a 3D graphene foam as a binder-free anode for high-performance Li-ion batteries

Xu Wang,Qi Chen,Pei Zhao,Miao Wang

DOI: https://doi.org/10.1039/C8RA05035J

IF: 4.036

2018-01-01

RSC Advances

Abstract:Interconnected mesoporous sheet-like ZnCo2O4 nanomaterials directly grown on a three-dimensional (3D) graphene film (GF) coated on Ni foam (NF) have been successfully synthesized via an effective chemical vapor deposition (CVD) method combined with a subsequent hydrothermal route. When the ZnCo2O4@3DGF@NF composite material with a high surface area of 46.06 m2 g−1 is evaluated as a binder-free anode material for lithium ion batteries, it exhibits a superior electrochemical performance with a high discharge capacity (1223 mA h g−1 at a current density of 500 mA g−1 after 240 cycles), and an excellent reversibility (coulombic efficiency of 97–99%). Such an outstanding electrochemical performance may be attributed to its unique mesoporous sheet-like nanostructure with a 3DGF supporting, which can facilitate the electrolyte penetration and accelerate the ion/electron transport, as well as buffer the volume variation during charge/discharge processes.
Facile synthesis 2D hierarchical structure of ultrahigh nitrogen-doped porous carbon graphene nanosheets as high-efficiency lithium-ion battery anodes

Yating Zhang,Kaibo Zhang,Kaili Jia,Guoyang Liu,Yongling Zhang,Wei Liu,Keke Li,Bochao Zhang,Peng Wang

DOI: https://doi.org/10.1016/j.matchemphys.2020.123043

IF: 4.778

2020-09-01

Materials Chemistry and Physics

Abstract:Ultrahigh N-doped porous carbon graphene nanosheets () with two-dimensional (2D) multilayer sandwich framework are elaborately designed from ZIF-8 nanoparticles in situ grown on graphene oxide (GO) with 2-methyimidazole and polyvinyl pyrrolidone added as nitrogen precursor through a facile one-step fast pyrolysis and explored in lithium-ion batteries (LIBs). As the process-enhanced anode material, the provide a high capacity of 906.6 mAh g−1 after 100 cycles at 0.5 A g−1, and an average capacity of 378.2 mAh g−1 after an extremely long cycling durability over 1000 cycles at 5 A g−1. It is worth noting that the superior electrochemical performance of the electrode as the anode for LIBs confirms the reliability of the sufficient "point and plane" 2D sandwich framework, and a portion of the micropores and a large number of preferred mesoporous channels help to facilitate rapid charge transfer, which indicates that is a vibrant material that plays a key role in contributing to the application in future energy storage.

materials science, multidisciplinary
A core-shell nanohollow-γ-Fe2O3@graphene hybrid prepared through the Kirkendall process as a high performance anode material for lithium ion batteries.

Hu, Jiangtao,Zheng, Jiaxin,Tian, Leilei,Duan, Yandong,Lin, Lingpiao,Cui, Suihan,Peng, Hao,Liu, Tongchao,Guo, Hua,Wang, Xinwei,Pan, Feng

DOI: https://doi.org/10.1039/c5cc01195g

2015-01-01

Abstract:We synthesized a core-shell structure with graphene as the shell and nano-hollow gamma-Fe2O3 as the core through a Kirkendall process at room temperature. When this hybrid is used as an anode material for lithium-ion batteries, it exhibits a remarkable electrochemical performance: a high reversible capacity of 1095, 833, and 551 mA h g(-1) at the current rates of 0.1 C, 1 C, and 2 C, respectively. When evaluated at 10 C, the capacity can still reach 504 mA h g(-1).

Synthesis of Graphene@fe3o4@c Core–shell Nanosheets for High-Performance Lithium Ion Batteries

Graphene-Wrapped Fe3O4 Anode Material for High-Performance Lithium Ion Batteries

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods with high reversible capacity in lithium-ion batteries.

Synergistic Ternary Composite (carbon/fe3 O4 @graphene) with Hollow Microspherical and Robust Structure for Li-Ion Storage.

Synthesis and Characterization of Fe@Fe2O3 Core-Shell Nanoparticles/graphene Anode Material for Lithium-Ion Batteries

Facile Synthesis of Fe@Fe2o3 Core-Shell Nanoparticles Attached to Carbon Nanotubes and Their Application As High Performance Anode in Lithium-Ion Batteries

Hybridization of Graphene Nanosheets and Carbon-Coated Hollow Fe3O4 Nanoparticles As a High-Performance Anode Material for Lithium-Ion Batteries

One-Pot High Temperature Hydrothermal Synthesis Of Fe3o4@C/Graphene Nanocomposite As Anode For High Rate Lithium Ion Battery

Active Fe2o3 Nanoparticles Encapsulated In Porous G-C3n4/Graphene Sandwich-Type Nanosheets As A Superior Anode For High-Performance Lithium-Ion Batteries

Preparation of Core-Shell Si/C/Graphene Composite for High-Performance Lithium-Ion Battery Anodes

One-Pot Synthesis Of Carbon Coated Fe3o4 Nanosheets With Superior Lithium Storage Capability

One-pot synthesis of ultrafine ZnFe2O4 nanocrystals anchored on graphene for high-performance Li and Li-ion batteries

Synthesis of Graphene-Wrapped ZnMn2O4 Hollow Microspheres As High Performance Anode Materials for Lithium Ion Batteries

Nano electrochemical reactors of Fe2O3 nanoparticles embedded in shells of nitrogen-doped hollow carbon spheres as high-performance anodes for lithium-ion batteries.

Layer-by-layer Self-Assembly of Graphene-Like Co3O4 Nanosheet/graphene Hybrids: Towards High-Performance Anode Materials for Lithium-Ion Batteries

Fe3O4 Contribution to Core–Shell Structured Si@C Nanospheres As High-Performance Anodes for Lithium-Ion Batteries

Core-shell Mn3O4 Nanorods with Porous Fe2O3 Layer Supported on Graphene Conductive Nanosheets for High-Performance Lithium Storage Application

Synthesis of interconnected mesoporous ZnCo2O4 nanosheets on a 3D graphene foam as a binder-free anode for high-performance Li-ion batteries

Facile synthesis 2D hierarchical structure of ultrahigh nitrogen-doped porous carbon graphene nanosheets as high-efficiency lithium-ion battery anodes

A core-shell nanohollow-γ-Fe2O3@graphene hybrid prepared through the Kirkendall process as a high performance anode material for lithium ion batteries.