Abstract:The development of a material with high ampacity to allow current to flow through narrow channels is one of the most promising ways to address the progressive miniaturization and light weight of electronic devices. The efficient synergistic electron transmission by compounding 1D/2D carbon materials with a metal matrix via various methods in recent years has attracted great research interest due to their potential utilization in electronics. In this study, a copper (Cu) matrix with a 3D nitrogen (N) doped-multi-walled carbon nanotubes (MCNTs) interface with prominent physical features is reported and fabricated, involving the use of nano-self-assembly-heat-modification by adopting polyethyleneimine-nano-Cu and carboxyl MCNTs. Young's modulus was enhanced from 28.8 to 92.2 GPa due to a higher efficiency of stress transfer and interfacial adhesion, and the hardness fitted by Gauss distribution was increased by ∼69% (∼39.7 HRC). Toward the stability after a modification of vacuum reduction sintering, the initial oxidation temperature (Td) was increased largely from 232 °C to 286 °C, and thermal conductivity was enhanced eminently from 358 to 548 W/(m K) due to more efficient electron/phonon motion. Moreover, synergistic electron transmission endowed the final Cu-N-CNTs with a higher ampacity (7.23–16.98 × 104 A cm−2), which could be further observed by the time-evolution of electrical resistivity under a constant current density. The improved physical features state that the assembled 3D N-CNTs interface possesses prominent characteristics and potential for directing the deep applications of 1D or 2D carbon materials in electronic science.

Copper-coated TiN nanofibers with high electrical conductivity: a new advance in conductive one-dimensional nanostructures

TiN nanofibers: A new material with high conductivity and transmittance for transparent conductive electrodes

Cu/Tin Nanofiber with Tunable Electrical Conductivity for Cost-Efficient Transparent Electrode

Copper Nanowires As Fully Transparent Conductive Electrodes.

A novel stretchable coaxial NiTi-sheath/Cu-core composite with high strength and high conductivity.

Fabricating and Strengthening the Carbon Nanotube/copper Composite Fibers with High Strength and High Electrical Conductivity

Facile synthesis of highly conductive Ag/TiN nanofibers for cost-saving transparent electrodes

N-doped Graphene-Based Copper Nanocomposite with Ultralow Electrical Resistivity and High Thermal Conductivity.

Solution electrowriting of highly stable TiN nanofiber pattern for transparent electrode under extreme environment

Copper Nanowire Based Transparent Conductive Films with High Stability and Superior Stretchability

Fabrication of High-Quality Copper Nanowires Flexible Transparent Conductive Electrodes with Enhanced Mechanical and Chemical Stability.

Fabrication of high-performance carbon nanotube/copper composite fibers by interface thiol-modification

Fabrication of Light‐Weight and Highly Conductive Copper–Carbon Nanotube Core–Shell Fibers Through Interface Design

Fast Fabrication Of Copper Nanowire Transparent Electrodes By A High Intensity Pulsed Light Sintering Technique In Air

Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers.

A Novel Strategy for High-Performance Transparent Conductive Films Based on Double-Walled Carbon Nanotubes.

Use of BN-coated copper nanowires in nanocomposites with enhanced thermal conductivity and electrical insulation

Meaningful improvements on structural-thermal-electronic properties of copper based on 3D nitrogen (N) doped-carbon nanotubes (CNTs) interface fabricated by nano-self-assembly-sintering-modification

Improved Electrical Conductivity of Copper and Nitrogen Functionalized Carbon Nanotubes

Unique Single-Crystal Tin1+X Nano-Rods: Synthesis, Electrical Transportation, and Electric Field Effect Conductivity

Enhanced electrical conductivity and hardness of Copper/Carbon Nanotubes composite by tuning the interface structure