Abstract:This article proposes a hierarchical collaborative reactive power and voltage control method aimed at meeting the internal voltage requirements of a coupled system composed of centralized new energy stations such as wind and solar power and traditional thermal power units, with particular attention paid to the reactive power regulation ability of power units in new energy stations. This method is implemented in two layers: At the transmission layer, the overall reactive power compensation capacity of thermal power units and stations on the transmission lines within the system is determined according to the engineering requirements of different node voltages in the coupled system, the regulation voltages of the high-voltage grid-connected points and the point of common coupling (PCC) of the stations are found, and the actual regulation voltages of the PCCs of the stations are given as commands. At the station layer, based on determining reactive power distribution between power units and continuous reactive power compensation devices within each station, voltage optimization is carried out using the voltage command issued by the transmission layer as a reference. At the same time, consistency coordination between the transmission layer and the station layer is achieved based on the Analytical Target Cascading (ATC) method at different layers. Finally, simulation analysis was conducted on a regional coupled system in Dalian. The results showed that the method proposed in this paper can effectively control the voltage safety requirements of each region and PCC in the coupled system and, to some extent, improve the economic efficiency of system operation.

Combined Control of Substation Voltage and Reactive Power Compensation by Microcomputer

A Method of Voltage & Reactive Power Fuzzy Control of Substation

Optimal Control of Generators and Series Compensators Within Multi-space-time Scale

Development of New Substations Voltage and Reactive Power Automatic Control Equipment

Control strategy designing of hybrid compensator based on APF and TSC

Discussion on Some Problems of the Intelligent Low-Voltage Reactive Power Compensation System

Anti-overcompensation control strategy in SVC based on steinmetz principle and instantaneous reactive power theory

Application and Improvement on Voltage and Reactive Power Control System Based on Substation Supervision System

Application of Virtual Instrument to SVC Control System

Collaborative Control of Reactive Power and Voltage in a Coupled System Considering the Available Reactive Power Margin

A New Control Strategy and Compensation Method on Hybrid System of Combining Apf with Shunt Capacitors

Multi-objective optimal control strategy design for substations in HAVC system

Overall design of 35 kV±200 Mvar STATCOM system

Multiobjective Coordinated Design Of Facts Controllers In Power Systems

Rule-Based Control for Statcom to Increase Power System Stability

Hybrid Automatic Voltage Control Strategy And Its Application To Northeast China 500kv Power Grid

Coordination of Continuous Variables and Discrete Variables in Automatic Voltage Control Part Two Coordinated Voltage Control among Power Plants and Substations

optimal reactive power control of the unattended substation based on SCADA systems

Development of a Fuzzy Rule-Based Multi-Objective Hybrid Controller for Static Synchronous Compensator

Coordinated Control of Multiple Dynamic Reactive Power Devices in Southern Jiangsu Power Grid

Study on Hybrid Automatic Voltage Control Strategy of Substation