Abstract:A formulation is presented for steady-state dynamic responses of rotating bending-torsion coupled composite Timoshenko beams (CTBs) subjected to distributed and/or concentrated harmonic loadings. The separation of cross section's mass center from its shear center and the introduced coupled rigidity of composite material lead to the bending-torsion coupled vibration of the beams. Considering those two coupling factors and based on Hamilton's principle, three partial differential non-homogeneous governing equations of vibration with arbitrary boundary conditions are formulated in terms of the flexural translation, torsional rotation and angle rotation of cross section of the beams. The parameters for the damping, axial load, shear deformation, rotation speed, hub radius and so forth are incorporated into those equations of motion. Subsequently, the Green's function element method (GFEM) is developed to solve these equations in matrix form, and the analytical Green's functions of the beams are given in terms of piecewise functions. Using the superposition principle, the explicit expressions of dynamic responses of the beams under various harmonic loadings are obtained. The present solving procedure for Timoshenko beams can be degenerated to deal with for Rayleigh and Euler beams by specifying the values of shear rigidity and rotational inertia. Cantilevers with bending-torsion coupled vibration are given as examples to verify the present theory and to illustrate the use of the present formulation. The influences of rotation speed, bending-torsion couplings and damping on the natural frequencies and/or shape functions of the beams are performed. The steady-state responses of the beam subjected to external harmonic excitation are given through numerical simulations. Remarkably, the symmetric property of the Green's functions is maintained for rotating bending-torsion coupled CTBs, but there will be a slight deviation in the numerical calculations.

Vibration Of Spinning Cantilever Beams Undergoing Coupled Bending And Torsional Motion

Vibration of Spinning Cantilever Beams With an Attached Rigid Body Undergoing Bending-Bending-Torsional-Axial Motions

Exact Frequency Analysis of a Rotating Cantilever Beam With Tip Mass Subjected to Torsional-Bending Vibrations

Transient Dynamics of an Axially Moving Beam Subject to Continuously Distributed Moving Mass

A new formulation and free vibration analysis of a nonlinear geometrically exact spinning Timoshenko beam

Nonlinear vibration, stability, and bifurcation analysis of unbalanced spinning pre-twisted beam

Dynamic modeling for rotating composite Timoshenko beam and analysis on its bending-torsion coupled vibration

Non-linear vibration of a traveling tensioned beam

Vibrational Characteristics of Rotating Soft Cylinders

Free vibration analysis of rotating composite Timoshenko beams with bending-torsion couplings

Dynamic Characteristics of a Rotating Tapered Cantilevered Timoshenko Beam with Preset and Pre-Twist Angles

An Analytical Model of a Rotating Radial Cantilever Beam Considering the Coupling Between Bending, Stretching, and Torsion

The coupled bending-torsional dynamic behavior in the rotating machinery: modeling, simulation and experiment validation

Dynamic modeling and coupling characteristics of rotating inclined beams with twisted-shape sections

Influence of flexural-torsional couplings and rotational effects on vibration behaviour of tapered thin-walled anisotropic biconvex beam

Analysis for the Free Vibration of Rotating Variable Cross-Section Beam

Vibration Modes of Centrifugally Stiffened Beams

Energy Expressions and Free Vibration Analysis of a Rotating Uniform Timoshenko Beam Featuring Bending—torsion Coupling

Beam modeling in a floating frame of reference for torsion dynamics of helicopter rotor blades

Dynamic Modeling and Vibration Control for a T-shaped Bending and Torsion Structure

Exact Solution of Free Vibration of A Uniform Tensioned Beam Combined with Both Lateral and Rotational Linear Sub-Systems