Modification of Lignin with Dodecyl Glycidyl Ether and Chlorosulfonic Acid for Preparation of Anionic Surfactant

Chang-Zhou Chen,Ming-Fei Li,Yu-Ying Wu,Run-Cang Sun

DOI: https://doi.org/10.1039/c4ra01873g

IF: 4.036

2014-01-01

RSC Advances

Abstract:Improving the surface activity of lignin through chemical modification for preparation of anionic surfactant.

What problem does this paper attempt to address?

Preparation and Surface Properties Investigation of Lignin-Phonls Non-Ionic Surfactant

Cui Ping Mao,Shu Bin Wu

DOI: https://doi.org/10.4028/www.scientific.net/amr.647.762

2013-01-01

Advanced Materials Research

Abstract:Surfactants from modified lignin have received growing attention recently. Lignin is an inevitable by-product of the chemical manufacturing processes for cellulose and pulping. Furthermore, this class of chemical has vast availability around the world. Due to the interactions of hydrophobic and hydrophilic groups on the interface, lignin modified surfactants present favorable surfactivity. In this paper, alkali lignin (AL) suffered the liquefaction treatment into liquefid alkali lignin (L-AL), of which major constituents were lignin-phenols. Hydrophilic modified L-AL was synthesized with epoxy chloropropane then with polyglycol. The surface tension, watersolubility and HLB value of the productions were characterized. Then the surfactant was applied to the experiments of foam properties, detergency and emulsifying power. The results showed that the modified surfactant had fine solubility in water, relatively higher HLB value of 16.26 and lower surface tention. The production had lower foaming power and foam stability. Though its decontamination performance was relatively weak，however the emulsifying power presented pretty well.
Synthesis and Characterization of an Amphiphilic Lignin-Based Cationic Surfactant

Qingyu Xu,Yayu Bai,Xin Zhao,Mingguang Ren,Shoujuan Wang,Fangong Kong

DOI: https://doi.org/10.1016/j.indcrop.2021.113376

IF: 6.449

2021-01-01

Industrial Crops and Products

Abstract:Based on the application of alkali lignin polymer modification, not only can the alkali lignin green treatment be realized, but also the dependence on petroleum-based materials can be effectively reduced, and the properties of the modified polymer can be enhanced. Therefore, in this study, ?-cinnamon group as the lipophilic group and diethylenetriamine group as the hydrophilic group were successfully introduced into alkali lignin to construct a lignin-based amphiphilic cationic surfactant. The lipophilic group introduced through the amine methylation reaction causes the lignin derivative to form a regular arrangement of lipophilic groups at the oil phase interface, and diethylenetriamine is introduced into the lignin through amine methylation reaction and ketoamine condensation reaction. Effectively enhance the hydrophilicity of the lignin derivative. The characterization of this lignin derivative is accomplished by different methods, such as elemental analysis, Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1HNMR) and X-ray photoelectron spectroscopy (XPS). The physical and chemical properties of the lignin derivative are tested by testing its stability in acidic solution, Zeta potential, surface tension, critical micelle concentration (CMC) and hydrophilic-lipophilic balance (HLB). Studies have shown that this amphiphilic cationic surfactant obtained by modifying alkali lignin has good performance, which means that it can be used as a W/O emulsion as an asphalt emulsifier, wetting agent, etc.
Preparation of A New Lignin-Based Anionic/Cationic Surfactant and Its Solution Behaviour

Mingsong Zhou,Wenli Wang,Dongjie Yang,Xueqing Qiu

DOI: https://doi.org/10.1039/c4ra10524a

IF: 4.036

2015-01-01

RSC Advances

Abstract:The lignin-based cationic/anionic surfactant CA-SLs have a stronger ability to lower the surface tension at the air/water interface compared with SL–PEG, but a weaker one than CTAB.
Synthesis of a Lignin-Based Surfactant Through Amination, Sulfonation, and Acylation

Jiubing Zhang,Yuanyuan Ge,Li Qin,Wenxing Huang,Zhili Li

DOI: https://doi.org/10.1080/01932691.2017.1385478

2017-01-01

Journal of Dispersion Science and Technology

Abstract:A simple and effective chemical method based on Mannich reaction, sulfonation, and acylation was adopted to anchor the hydrophilic sulfonic groups and lipophilic long carbon chains onto alkaline lignin. The obtained products were characterized by Fourier transform infrared spectroscopy (FTIR) and elemental analysis, and the surface activity was evaluated by interfacial tension, which was determined by a maximum bubble pressure method. The results demonstrated that the ASAL showed high surface activity in comparison to lignosulfonate and the interfacial tension reached 5.0 (10(-3)Nm(-1)) when the mass fraction of ASAL was 5%, in agreement with the properties of good surfactants.** [GRAPHICS] .
Preparation of Surface Active Lignin From Alkali Extracted Lignin

Wu Hui-ran,Chen Fan-geng,Qian Lei-lei

DOI: https://doi.org/10.19696/j.issn1671-4571.2011.05.007

2011-01-01

Abstract:A sulfonated lignin with enhanced surface activity was prepared from corn stalk alkali extracted lignin by oxidation,amination and sulfonation.The variation in structural characteristics of oxidized lignin was investigated.The impacts of amination and sulfonation on the solubility and surface activity were investigated.Experimental data indicated that the oxidation led to a reduced relative molecular mass and a narrower relative molecular mass distribution.Ionization difference UV spectra indicated that oxidation resulted in an increase of phenolic hydroxyl content.The surface tension of aqueous sulfonated lignin solution was reduced to a minimum of 41.2mN/m indicating that the sulfonated lignin exhibited good surface activity.
Synthesis and characterization of diethanolamine-based lignin nonionic surfactant.

Ai Qing,Fang Gui-zhen,Zhao YinFeng,Wang ChunHai,Ren Shixue

2009-01-01

Abstract:Alkaline lignin was classificated according to the method of acid precipitation.The classified lignin at pH value 4-6 was treated with epichlorohydrin and diethanolamine to prepare diethanolamine-based lignin nonionic surfactant.The structure of the product was characterized by FT-IR and determination of nitrogen content.The surface-active property and solubility were investigated by surface tension experiment and turbidity test.The results showed that solid content of the surfactant is 32.6%,nitrogen content is 1.99%,FT-IR spectrum showed the introduction of diethanolamine into lignin.Surface tension of aqueous solution decreased to 53.27mN/m,indicating the favorable surface activity in aqueous solution.The turbidity determination of blended solution of diethanolamine-based lignin nonionic surfactant(DLNS) with dodecyl sodium sulfate(SDS) showed low turbidity and superior effect in quite a wide range of V(SDS)∶V(DLNS)20∶3-20∶20.
Dual Effect of Nonionic Surfactants on Improving the Enzymatic Hydrolysis of Lignocellulose

Wen Wang,Xinshu Zhuang,Xuesong Tan,Qiong Wang,Xiaoyan Chen,Qiang Yu,Wei Qi,Zhongming Wang,Zhenhong Yuan

DOI: https://doi.org/10.1021/acs.energyfuels.8b00225

IF: 4.6541

2018-01-01

Energy & Fuels

Abstract:The mechanism of nonionic surfactants improving the cellulose conversion is still controversial. To protect enzyme stability and prevent unproductive adsorption of cellulase to lignin, which have been thought of as the chief factors for the improvement of nonionic surfactants on cellulolytic hydrolysis, were evaluated in this work. SDS-PAGE detection showed that the enzyme could not aggregate in the enzymatic hydrolysis process whether the polysorbates (Tweens) were present or not. Tweens had different capabilities to retain and even improve enzymes' activities, but these capabilities had little relation to enhancing the enzymatic hydrolysis of treated sugar cane bagasse (SCB). Tweens could increase the adsorption of cellulase to lignins and SCB samples, which was different from the current viewpoint that nonionic surfactants could impede the adsorption of cellulase to lignin. After discussion, it was proposed that the nonionic surfactants initially lubricated the access of cellulase to cellulose and subsequently combined with the free chemical groups released from lignin to impede the adsorption of cellulase to lignin with the enzymatic hydrolysis proceeding.
Research on synthesis and performance of novel modified lignosulfonate surfactants

焦艳华,徐志刚,乔卫红,李宗石,程侣柏

DOI: https://doi.org/10.3321/j.issn:1000-8608.2004.01.010

2004-01-01

Abstract:A series of modified lignosulfonates containing aliphatic amide residues were prepared from kraft lignin (wood and straw) via a modification route, including Mannich reaction with aliphatic polyamine, acylation by oleyl chloride and sulfomethylation. The interfacial tensions of products were measured and the effects on the interfacial tension were discussed. The results indicate that the products have the excellent interfacial activity between the Shengli crude oil and the solutions of products, so that without the addition of other surfactants the ultralow interfacial tension can be achieved within the wide range of surfactant concentration and sodium hydroxide. Therefore, the prepared modified lignosulfonates can be applied as surfactants in enhanced oil recovery.
Unraveling the Secrets of Harnessing a Surfactant-Modified Strategy in Organosolv Pretreatment of Lignocellulosic Biomass for Efficient Fermentable Sugar Production

Guojie Song,Hui Zhang,Meysam Madadi,Zhixiangpeng Chen,Hao Wang,Ao Xia,Abdolreza Samimi,Chihe Sun,Xianzhi Meng,Arthur J. Ragauskas,Fubao Sun

DOI: https://doi.org/10.1039/d4gc02775b

IF: 9.8

2024-01-01

Green Chemistry

Abstract:Alkaline-catalyzed organosolv pretreatment of lignocellulosic biomass affords excellent delignification, yielding a holocellulose-rich substrate for fermentable sugar production. However, complete lignin removal is impractical, and residual lignin also exacerbates negative effects on subsequent enzymatic hydrolysis. Herein, a novel strategy of developing surfactant-assisted organosolv pretreatment (Triton-X 100, AEO 9 and Tween 80) for in situ lignin modification was proposed to overcome this issue. The results indicated that the pretreated substrates showed considerable enzymatic hydrolyzability with a 15.7%-38.3% higher sugar yield compared to the control group without surfactants. Surfactants could graft on both residual and dissolved lignin through etherification, forming alpha-etherified lignin, though without significantly changing the component distribution and substrate-related properties. Quantum chemical calculations provided theoretical evidence of strong H-bonding and pronounced interaction energy between lignin and surfactants (maximally at -48.4 kcal mol(-1)). In particular, this surfactant modification decreased the aliphatic -OH and phenolic -OH contents of residual lignin by 16.0%-22.4% and 13.8%-28.8%, respectively. The reduction of -OH groups mitigated non-productive adsorption between lignin and cellulases via H-bonding interaction, which exhibited a significant correlation with the increased enzymatic hydrolyzability (>-0.9). Overall, this study offers valuable insight into the fundamental understanding of the mechanism involved in lignin modification during surfactant-assisted pretreatment and lignin-enzyme interaction during enzymatic hydrolysis. The new findings underscore the potential application of surfactants in organosolv pretreatment to achieve a feasible approach for developing an efficient enzyme-mediated lignocellulosic sugar platform.
Oxidation of Organosolv Lignin in a Novel Surfactant-Free Microemulsion Reactor.

Juanhua Kong,Lixia Li,Qiang Zeng,Zhenping Cai,Yingying Wang,Hongyan He,Sijie Liu,Xuehui Li

DOI: https://doi.org/10.1016/j.biortech.2020.124466

IF: 11.4

2020-01-01

Bioresource Technology

Abstract:Lignin is considered as a promising substitute for fossil resources, but its efficient conversion remains a huge challenge due to the structural complexity and immiscibility with typical solvents. Herein, a series of surfactant-free microemulsion reactors comprised of n-octane, water and n-propanol were designed and their corresponding phase behaviors alongside their ability to intensify oxidative depolymerization of lignin were explored. Experimental results show that the phenolic monomer yield improves substantially (40-500 wt%) by comparison with processes performed in a single solvent. Detailed characterizations also suggest that the above intensification is rationalized by the solubilization effect of microemulsion system and directional aggregation of lignin at the microemulsion interface.
Preparation of Surfactants for Enhanced Oil Recovery from Alkali Lignin Pretreated with Hydrogen Peroxide.

SHEN Shi-cheng,ZHOU Yu-jie,MI Jie,ZHANG Jian-an,DAI Ling-mei,LIU De-hua,CHOO Y M,LOH S K

DOI: https://doi.org/10.3969/j.issn.0253-2417.2014.01.010

2014-01-01

Abstract:The method for synthesis of surfactants for enhance d oil recovery, including pretreatment with H2 O2 , sulfonation, amination and alkylation, was studied with alkali lignin as feedstock. Firstly, the effects of pretreatment conditions on surface tension were investigated. The suitable pretreatment conditions were that mass ratio of H2 O2 to alkali lignin was 1:10 at 70℃ for 30 min. Under the pretreatment conditions, the surface tension of 0. 9 % surfactant solution could be reduced to 24 mN/m. The effects of surfactant and alkali concentration on oil-water interfacial tension of Gudao crude oil were also studied. The results showed that when both the surfactant concentration and NaOH concentration was 0. 4 %, the oil-water interfacial tension was decreased to 0. 07 mN/m. It was more stable than the control surfactants synthesized without H2 O2 pretreatment. Finally, Fourier Transform Infrared ( FT-IR) analysis indicated the structural characterization of lignin before and after modification.
Unraveling the secrets of harnessing surfactant-modified strategy in organosolv pretreatment of lignocellulosic biomass for efficient fermentable sugar production

Guojie Song,Hui Zhang,Meysam Madadi,Zhixiangpeng Chen,Hao Wang,Ao Xia,Abdolreza Samimi,Chihe Sun,Xianzhi Meng,Arthur J. Ragauskas,Fubao Sun

DOI: https://doi.org/10.1039/d4gc02775b

IF: 9.8

2024-08-26

Green Chemistry

Abstract:Alkaline-catalyzed organosolv pretreatment of lignocellulosic biomass affords excellent delignification, yielding a holocellulose-rich substrate for fermentable sugar production. However, complete lignin removal is impractical, and residual lignin also exacerbates negative effects on subsequent enzymatic hydrolysis. Herein, a novel strategy of developing surfactant-assisted organosolv pretreatment (Triton-X 100, AEO 9 and Tween 80) for in-situ lignin modification was proposed to overcome this issue. Results indicated that the pretreated substrates endowed considerable enzymatic hydrolyzability, with 15.7%–38.3% higher sugar yield compared to the control group without surfactants. Surfactants could graft on both residual and dissolved lignin through etherification, forming α-etherified lignin, though without significantly changing the component distribution and substrate-related properties. Quantum chemical calculations provided the theoretical evidence of strong H-bonding and pronounced interaction energy between lignin and surfactants (maximally at –48.4 kcal/mol). Particularly, this surfactant modification decreased the aliphatic –OH and phenolic –OH of residual lignin by 16.0%–22.4% and 13.8%–28.8%, respectively. The reduction of total –OH groups mitigated non-productive adsorption between lignin and cellulases via H-bonding interaction, which exhibited a significant correlation with the increased enzymatic hydrolyzability (–0.87–0.96). Overall, this study offers valuable insight into the fundamental understanding of the mechanism involved in lignin modification during surfactant-assisted pretreatment and lignin-enzyme interaction during enzymatic hydrolysis. The new findings underscore the potential application of surfactants in organosolv pretreatment to achieve a feasible approach for developing efficient enzyme-mediated lignocellulosic sugar platform.

chemistry, multidisciplinary,green & sustainable science & technology
Study On The Preparation And Deinking Efficiency Of The Modified Lignin-Phenols Surfactants

Cuiping Mao,Shubin Wu,Bo Li

2012-01-01

Abstract:In recent years, surfactants from modified lignin have received growing attention. Lignin is an inevitable by-product of the chemical manufacturing processes for cellulose and pulping. Furthermore, this class of chemical has vast availability around the world. Lignin modified surfactant is usually prepared by grafting various hydrophobic or hydrophilic groups onto the aromatic nucleus. Due to the interactions of hydrophobic and hydrophilic groups on the interface, lignin modified surfactants present favorable surfactivity, which may be potentially proper for the decontamination of secondary fiber recovery. In this paper, lignin materials, alkali lignin (AL) and lignosulphonate (LS), were prepared through liquefaction treatment into lignin-phenols products. Then, hydrophobic modified LS and hydrophilic modified AL were ordinal synthesized with epoxy chloropropane then with laurinol and polyglycol. The surface tension, watersolubility and HLB value of the productions were characterized. Then the surfactants were applied to the deinking of secondary fiber in flotation process under weak alkali conditions. And the experiments by using the lignin products combined with other nonionic and anionic surfactants were also carried out. Evaluation and comparison were made through the goals of brightness and deinking efficiency. The results showed that the increment of brightness for OMG flotation were 11.04 and 10.61% ISO and the deinking efficiency were 60.85% and 53.06% by individually taking modified AL and LS as deinking agent. Under the condition of the two lignin surfactants mixed with nonionic and anionic surfactants, the results would be improved. The brightness was increased 10.65 and 12.32% ISO and the ratio of deinking was 68.66% and 60.82%. Furthermore, the trials of adding mineral clay to the combined agents were investigated. It was found that it had no negative influence on the deinking results. But, the state of the deinking agent with clay was powder. That means it would be more convenient for the final products in transporting and quantificational application. The results of this study indicated that the surfactants from modified lignin-phenols were fitting to remove OMG ink in weak alkali conditions.
Synthesis of a lignin-based alcohol ether carboxylate surfactant and its application as cotton fiber detergent

Juhua Ou,Zhenxing Kong,Rui Yang,Zilin Dai

DOI: https://doi.org/10.1080/01932691.2021.1956323

2021-08-04

Journal of Dispersion Science and Technology

Abstract:Alkyl glycidyl ether and 3-chloropropionic acid were grafted onto alkaline lignin (KL) to obtain lignin-based alcohol ether carboxylate surfactant (KLS) and its structure, surface tension, emulsifying ability and detergency of cotton fiber were investigated. Then, the alkaline lignin was pretreated by using ultrasound to activate the KL molecular. The pretreated KL showed lower Mn and narrow molecular weight distribution. The absorbance ratio of A1125/A1600 and A1047/A1600 of pretreated KL increased as the time of the ultrasound increased, indicating that new phenolic hydroxyl groups were formed. Further study revealed that the Mn, surface tension and emulsifying ability were significantly affected by the reaction temperature and ultrasound treatment. The sample (KLSU) obtained at 70 °C with ultrasound pretreatment had a good surface activity and emulsifying ability. The critical micelle concentration of KLSU was 3.1 g/L and the corresponding surface tension was 29.1 mN/m. The KLSU was used as a novel surfactant for detergent and exhibited significant detergency property. The effect of different types of surfactant on the detergency, zeta potential, surface tension and particle distribution of mixture solution containing KLSU were investigated. The KLSU solution mixed with sodium dodecyl benzene sulfonate showed good detergency, surface tension and stability. This article highlighted the potential usage of lignin-based alcohol ether carboxylate surfactant in detergent.Graphical

chemistry, physical
Studies on A Novel Modified Lignin Surfactant

YH Jiao,WH Qiao,ZS Li,LB Cheng

DOI: https://doi.org/10.1515/tsd-2003-400204

2003-01-01

Tenside Surfactants Detergents

Abstract:A series of novel lignin surfactants were synthesized from Kraft lignin (straw and wood) via a new modified route. The surface tension was measured as a function of surfactant concentration. The critical micellar concentration (c.m.c.) and surface tension (gamma(cmc)) at c.m.c. of all the products were compared. Tests of surface properties showed that these novel modified lignin surfactants exhibited good surface activity.
Synthesis of Surfactants from Alkali Lignin for Enhanced Oil Recovery

Shuyan Chen,Shicheng Shen,Xiang Yan,Jie Mi,Gehua Wang,Jianan Zhang,Yujie Zhou

DOI: https://doi.org/10.1080/01932691.2015.1118703

2015-01-01

Journal of Dispersion Science and Technology

Abstract:With the cheap and abundant resource of alkali lignin as feedstock, surfactants for enhanced oil recovery were synthesized by amination and alkylation reaction of lignosulfonate. The effects of amination conditions, including the ratio of raw materials, amination reagent, temperature, and reaction time, on nitrogen contents and surface tension of the surfactants were investigated. The results showed that ethylenediamine was more suitable for amination, and the molar ratio of alkali lignin, ethylenediamine, and formaldehyde was 1:2:1.5 at 80 degrees C for 5 hours. The structure of synthesized products was characterized by Fourier transform infrared spectrometry. The HLB value of synthesized product was 10. The interfacial tension between Daqing crude oil and synthetic water could be decreased to 10(-2) mN/m with synthesized surfactant and NaOH at 45 degrees C. Moreover, the effects of molecular weight of surfactants on interfacial tension were also studied. The synthesized surfactant (M-w > 10,000) showed a better interfacial activity on Daqing crude oil.
Synergistic effects of lignin-phenol-based nonionic surfactant with anionic surfactants in aqueous solution

Cuiping Mao,Shubin Wu

DOI: https://doi.org/10.15376/biores.8.4.5025-5035

2013-01-01

BioResources

Abstract:Surfactants made from modified lignin are attracting growing attention; therefore, a lignin-phenol nonionic surfactant named ML-AL has been prepared by modifying liquefied industrial alkali lignin (L-AL). Its basic physical and chemical properties have been shown to be favorable. In this work, anionic surfactants of sodium fatty acid soap (carbon numbers 12, 16, and 18) and sulfur-containing anionic surfactants (sodium dodecyl sulfate and sodium dodecyl benzene sulfonate) were chosen to mix with ML-AL in water-soluble media. The surface properties of each binary mixed solution system with anionic surfactant were investigated. At the same time, the mixed micelles formed by ML-AL and each anionic surfactant were studied. Non-ideal mixed micelles were obtained via ML-AL and the tested anionic surfactant. The interaction parameter (beta(M)) and excess free energy (Delta G(excess)) were both negative. Meanwhile, the critical micelle concentration (CMC) values of mixed systems (formed by ML-AL and each anionic surfactant in aqueous solution) were lower than those of a single-component system (ML-AL or single anionic surfactant). There was an optimum dosage ratio of about 0.4 in terms of synergistic effects. This research could provide a foundation for practical applications of combinations with anionic surfactants in aqueous solution.
Modification of Sodium Lignosulfonate and Evaluation of its Potential Use as Detergent Builders

Juhua Ou,Jianhong Zhao

DOI: https://doi.org/10.1080/02773813.2016.1235589

2016-11-07

Journal of Wood Chemistry and Technology

Abstract:Sodium lignosulfonate (LS) was modified by polypropylene glycol diglycidyl ether (PPGDE) for the preparation of a surfactant (GLS), and firstly used for detergent builder. The effects of PPGDE content on the reaction and the properties of GLS were investigated. The structure of GLS was studied by Fourier transform infrared spectra (FTIR), ultraviolet spectrophotometer (UV), and gel permeation chromatography (GPC). The surface tension, critical micelle concentration (CMC), emulsifying ability, lime soap dispersing power (LSDP), and detergency were characterized. The results showed that GLS had higher surface activity and better emulsifying ability, LSDP, and detergency than that of LS. After decolorized by H2O2, the whiteness retention value of decolorized LS on white cloth reached 91.9%, while that of decolorized GLS increased up to 99.4%. These results suggested that the decolorized GLS may provide a new perspective for detergent builders.

materials science, paper & wood
Preparation of Aminated Lignin Through Etherification and Amination

ChangZhou Chen,BingXin Wang,YanRu Zhang,Ting Shi,Jun Liu,XiLuan Wang,YongMing Fan

DOI: https://doi.org/10.26599/pbm.2018.9260010

2018-01-01

Abstract:A new method for the preparation of aminated lignin（AEL） through etherification and amination reaction was presented. Chlorine atoms were firstly introduced into lignin through its etherification with epichlorohydrin. Then, hydrophilic amine groups were grafted to the modified lignin structure through amination with ethylenediamine to obtain AEL. Subsequent acidification of AEL led to the ionized aminated lignin（IAEL）. The results of our analyses showed that the nitrogen content of AEL was 6.9%. Foaming and emulsifying experiments indicated that AEL had better foamability and emulsifying properties than IAEL. Surface tension tests showed that AEL and IAEL had similar critical micelle concentration（CMC）. However, IAEL had lower surface tension（36.33 mN/m） than AEL（42.89 mN/m） at CMC. These results demonstrate the promising applicability of AEL as an emulsifier and that of IAEL as feedstock in the production of detergent and dispersant.
Preparation And Characterization Of Lignosulfonate From Alkali Extracted Lignin

Huiran Wu,Fangeng Chen

2011-01-01

Abstract:A lignosulfonate was prepared from alkali extracted lignin by oxidation and sulfomethylation. Lignin was treated by the mixture of hydrogen peroxide and ferrous sulfate, subsequently sulfomethylated by formaldehyde and sodium sulfite. The number average relative molecular mass of the resulting lignosulfonate was 1400, while that of alkali extracted lignin was 4600. The sulfonic group content of lignosulfonate increased with the increase in the consumption of sodium sulfite or the increase in the sulfonation time. The maximum content of sulfonic group in lignosulfonate achieved approximately 1.3mmol/g. The surface activity of lignin was improved after oxidation and sulfomethylation.

Modification of Lignin with Dodecyl Glycidyl Ether and Chlorosulfonic Acid for Preparation of Anionic Surfactant

Preparation and Surface Properties Investigation of Lignin-Phonls Non-Ionic Surfactant

Synthesis and Characterization of an Amphiphilic Lignin-Based Cationic Surfactant

Preparation of A New Lignin-Based Anionic/Cationic Surfactant and Its Solution Behaviour

Synthesis of a Lignin-Based Surfactant Through Amination, Sulfonation, and Acylation

Preparation of Surface Active Lignin From Alkali Extracted Lignin

Synthesis and characterization of diethanolamine-based lignin nonionic surfactant.

Dual Effect of Nonionic Surfactants on Improving the Enzymatic Hydrolysis of Lignocellulose

Research on synthesis and performance of novel modified lignosulfonate surfactants

Unraveling the Secrets of Harnessing a Surfactant-Modified Strategy in Organosolv Pretreatment of Lignocellulosic Biomass for Efficient Fermentable Sugar Production

Oxidation of Organosolv Lignin in a Novel Surfactant-Free Microemulsion Reactor.

Preparation of Surfactants for Enhanced Oil Recovery from Alkali Lignin Pretreated with Hydrogen Peroxide.

Unraveling the secrets of harnessing surfactant-modified strategy in organosolv pretreatment of lignocellulosic biomass for efficient fermentable sugar production

Study On The Preparation And Deinking Efficiency Of The Modified Lignin-Phenols Surfactants

Synthesis of a lignin-based alcohol ether carboxylate surfactant and its application as cotton fiber detergent

Studies on A Novel Modified Lignin Surfactant

Synthesis of Surfactants from Alkali Lignin for Enhanced Oil Recovery

Synergistic effects of lignin-phenol-based nonionic surfactant with anionic surfactants in aqueous solution

Modification of Sodium Lignosulfonate and Evaluation of its Potential Use as Detergent Builders

Preparation of Aminated Lignin Through Etherification and Amination

Preparation And Characterization Of Lignosulfonate From Alkali Extracted Lignin