Abstract:In central hot-spot ignition of inertial confinement fusion (ICF), a spherical capsule containing deuterium-tritium (DT) fusion fuel is imploded to a much smaller sphere so as to achieve high fuel density and high temperature in the central hot spot, triggering ignition and producing significant thermonuclear output. Low-adiabat (entropy) implosions maximize the fuel compression. Unfortunately, experiments on the National Ignition Facility has demonstrated that the hydrodynamic instability, which leads to hot-spot deformation, main-fuel-layer distortion and ablator mixing into the hot spot, is much prominent than expected [1]. High-foot high-adiabat implosions, with higher ablation velocities and larger density gradient scale lengths, are designed to reduce ablation-front Rayleigh-Taylor instability induced mixing of ablator material into the DT hot spot [2]. Nevertheless, the laser energy required for ignition is approximately proportional to the square of the fuel adiabat, and it seems hard to design a high-adiabat ignition target for the current mega joule laser facilities. In this report, we propose a design of a wedged-peak-pulse at late stage of the indirect drive, for a medium fuel adiabat. First, during the wedged-peak-pulse the radiation drive grows gradually creating a series of compression waves which compress the fusion fuel without significantly raising the fuel adiabat. Second, the compression waves merges as they travel into the hot spot forming a strong inward shock wave or compression wave, which prohibits the reflection of the outward rebounding shock (from the spherical center) at the interface of the hot spot and main fuel layer, thus stabilizing the deceleration stage hydrodynamic instability. With the wedged-peak-pulse, the fuel adiabat is kept at reasonable value such that the one-dimensional (1D) performance of the capsule is better than that of the high-foot implosions and comparable to that of the low-foot implosions. Meanwhile, the hydrodynamic instability, at both the ablator/fuel interface and hot-spot/main-fuel interface, are significantly reduced as compared with low-foot implosions. Simulations with the LARED-JC code indicate that the wedged-peak pulse is achievable with a (cylinder) hohlraum driven by a laser facility with energy of ~2.0MJ. Moreover, our scheme is also robust with respect to the maximum radiation temperature. We expect that the new type of design would be a good way for indirect-drive ICF on mega-joule laser facilities.

A Moderate-Gain Icf Model from Lte Ignition to Non-Lte Burn

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

The Volume Ignition For Icf Ignition Target

Amplifier scheme: driven by indirect-drive under 10 MJ laser toward inertial fusion energy

Physical Processes Of Volume Ignition And Thermonuclear Burn For High-Gain Inertial Confinement Fusion

Kinetic process analysis of volume thermonuclear ignition in high gain inertial confinement fusion

FLAIM: A reduced volume ignition model for the compression and thermonuclear burn of spherical fuel capsules

Design of an Indirect-Drive Pulse Shape for ∼1.6 MJ Inertial Confinement Fusion Ignition Capsules

A High-Resolution Integrated Model of the National Ignition Campaign Cryogenic Layered Experiments

Indirect-direct hybrid-drive work-dominated hotspot ignition for inertial confinement fusion

A wedged-peak-pulse design with medium fuel adiabat (entropy) for indirect-drive fusion

Optimizing Doping Parameters of Target to Enhance Direct-Drive Implosion

Numerical validation of a volume heated mixed fuel concept

A new ignition scheme using hybrid indirect-direct drive for inertial confinement fusion

Use of tritium-rich fuel to improve the yield of layered deuterium/tritium inertial fusion capsules

Burn Propagation in Magnetized High-Yield Inertial Fusion

Optimization of target compression for high-gain fast ignition via machine learning

Analysis of Growing Characteristics of Fuel Layer in ICF Cryogenic Target

Modelling the Effect Of3he in Direct Drive Capsule Implosions

Modeling of high energy laser ignition of energetic materials

Thermal Effect of N41 Nd:Glass Slab with 400 mm Aperture