Abstract:This study conducts an optimized design and a comprehensive high-frequency theoretical analysis on a T-shaped, four-period resonant slow-wave structure. By employing the image theory, the T-shaped waveguide unit was translated into an equivalent ridge waveguide configuration. The high-frequency characteristics of the equivalent ridge waveguide were analyzed using equivalent circuit theory, leading to a resonant frequency and structural analysis of the T-shaped waveguide. The analysis has confirmed that in the ridge waveguide, starting from the second-highest order mode, the frequency points of the even-order modes exhibit a strong correspondence with those of the T-shaped waveguide; however, the odd-order modes lack a corresponding mode in the T-shaped waveguide, as they do not fulfill the electric boundary conditions dictated by the image method. On this basis, a T-shaped four-period resonant slow-wave structure was constructed, and its dispersion characteristics were analyzed to determine the resonant modes and frequencies, as well as the range of mode synchronization voltages. Simulations were subsequently performed to validate the effectiveness of the relativistic extended interaction radiation source, which incorporated the novel T-shaped periodic resonant slow-wave structure. Advanced three-dimensional particle simulations, in conjunction with optimization techniques, facilitated the achievement of a high-power microwave output at a frequency of 9.8 GHz, delivering an average power of 71.4 MW. This output was attained under conditions of a 448 kV beam voltage, 400 A beam current, and a 0.4 T uniform axial magnetic field, which resulted in an electron efficiency of 39.8%. This structure, characterized by the T-shaped waveguide, was demonstrated to be capable of producing high-efficiency, high-power microwaves with fewer periods, presenting a compact and efficient solution for the generation of high-power microwaves in advanced scientific applications.

Optimization of a Broadband Millimeter-Wave Pulsed High Power Transmitter

Digital Predistortion of 75-110Ghz W-Band Frequency Multiplier for Fiber Wireless Short Range Access Systems

A 60-GHz power amplifier with efficiency enhancement at power back-off

A CMOS 135–150 GHz 0.4 dBm EIRP transmitter with 5.1dB P1dB extension using IF envelope feed-forward gain compensation

A 20 W W-band pulse solid-state transmitter using injection-locked compact cascaded power combining networks

Modulation Optimization for D-band Wireless Transmission Link

Analysis and Design of a W-band Coherent Pulsed Transmitter Using a New Timing Scheme

Pre-distortion Compensation for Optical-Based Broadband LFM Signal Generation System

Optimization of Slow-Wave Structure in High Power 0.34 Thz Radiation Source

A Broadband Doherty Power Amplifier Design by Optimizing Its Load Modulation Network

32.4 A 67.8-to-108.2ghz Power Amplifier with a Three-Coupled-Line-Based Complementary-Gain-Boosting Technique Achieving 442ghz GBW and 23.1% Peak PAE

Design and Implementation of DC-to-5~MHz Wide-Bandwidth High-Power High-Fidelity Converter

Optimization of High Power Terahertz Surface Wave Oscillator

High Power and High Pulse Repetition Frequency Transistorized Pulser by Time Base Stability Improvement and Power Synthesis Technique.

Analysis and simulation of X-band high-power microwave generation based on T-shaped four-period slow-wave structure

A Highly Linear Fully Integrated CMOS Power Amplifier with an Analog Predistortion Technique

Enhancing power capacity and performance of wide-drift-channel transit-time oscillators for long-pulse high-power microwave generation

A Wideband Power Amplifier in 65 nm CMOS Covering 25.8 GHz–36.9 GHz by Staggering Tuned MCRs

Synthesis of Broadband Oversized Smooth-Walled Horn for High-Power Millimeter Wave

Theoretical and experimental analysis of high-power frequency-stabilized semiconductor master oscillator power-amplifier system

Power Improvement of a Ho:YAG Power Amplifier and Its Application to a 150 W ZGP–OPO