Secondary emission property and microstructure analysis on molybdenum cathode doped with rare earth oxides made by spark plasma sintering
S Yang,ML Zhou,JS Wang,HY Li,TY Zuo
DOI: https://doi.org/10.3321/j.issn:1002-185X.2003.11.020
2003-01-01
Rare Metal Materials and Engineering
Abstract:The secondary emission coefficients, densities, microstructures for molybdenum cathodes have been determined. The cathodes doped with higher content of rare earth oxides were produced by SPS. The results were compared with one made by general sinter technique. It is shown that the molybdenum crystals doped with higher content of rare earth oxides are finer, and the secondary emission coefficients are higher than that of CIP-S, and their relative densities are 95.6% similar to 98.8%. Moreover, the temperature of SPS with a holding time of 3 minute is lower 180degreesC to 280degreesC than that of CIP-S. The reason is because that the film with a higher content of rare earth oxides is formed fast in activation and emitting. However, when the temperature is higher than 1600degreesC, the grain size of the cathode increases quickly with decrease of the secondary emission coefficients of the cathode.