Abstract:The steeply growing performance demands for highly power- and energy-constrained processing systems such as end-nodes of the internet-of-things (IoT) have led to parallel near-threshold computing (NTC), joining the energy-efficiency benefits of low-voltage operation with the performance typical of parallel systems. Shared-L1-memory multiprocessor clusters are a promising architecture, delivering performance in the order of GOPS and over 100 GOPS/W of energy-efficiency. However, this level of computational efficiency can only be reached by maximizing the effective utilization of the processing elements (PEs) available in the clusters. Along with this effort, the optimization of PE-to-PE synchronization and communication is a critical factor for performance. In this work, we describe a light-weight hardware-accelerated synchronization and communication unit (SCU) for tightly-coupled clusters of processors. We detail the architecture, which enables fine-grain per-PE power management, and its integration into an eight-core cluster of RISC-V processors. To validate the effectiveness of the proposed solution, we implemented the eight-core cluster in advanced 22nm FDX technology and evaluated performance and energy-efficiency with tunable microbenchmarks and a set of real-life applications and kernels. The proposed solution allows synchronization-free regions as small as 42 cycles, over 41 times smaller than the baseline implementation based on fast test-and-set access to L1 memory when constraining the microbenchmarks to 10% synchronization overhead. When evaluated on the real-life DSP-applications, the proposed SCU improves performance by up to 92% and 23% on average and energy efficiency by up to 98% and 39% on average.

Always-on Buffer Clustering Implementation in Low Power Physical Design of 28nm Process

Design Time Body Bias Selection for Parametric Yield Improvement.

A Cross-Layer Approach for Early-Stage Power Grid Design and Optimization.

Study on the Low Power Cache Design Technique

Research on low power technology based on Multi Bit Flip Flop

Low Power Clock Buffer Planning Methodology in F-D Placement for Large Scale Circuit Design.

Design Of Low Power Buffer Using Driver-Array For On-Chip Ips Interconnection

Adaptive Energy-Aware Design Of A Multi-Bank Flash-Memory Storage System

Implementation of Low Power Strategies in a Base-band Chip in 40nm CMOS Technologies

Towards ultra low-power MCU implementation through physical design based on improved multibit SRPG

Optimizing Buffer Usage For Networks-On-Chip Design

A Register Clustering Algorithm for Low Power Clock Tree Synthesis

Research On Circuit-Level Design Of High Performance And Low Power Fpga Interconnect Circuits In 28nm Process

A Design of the Loop Buffering for the Low Power ASIP

A 64×32bit 4-Read 2-Write Low Power and Area Efficient Register File in 65nm CMOS

Analyzing the Performance of 6T SRAM Cell and 64×64 Memory Array at Lower Technology Nodes for Low Power Design

Buffer Planning for Application-Specific Networks-on-chip Design.

A Power-Aware Adaptive Routing Scheme for Network on a Chip

Energy-Efficient Hardware-Accelerated Synchronization for Shared-L1-Memory Multiprocessor Clusters

An adaptive buffer regulating scheme for on-chip routers

DBU-PG: energy-efficient noc design using dual-buffering power gating