Dynamic measured system for hillslope runoff rate and sediment concentration based on time method and illumination method
Zeng Weijun,Zhang Yunwei,Chen Ling,Wang Dalong,Dong Xiaowei,Wang Yanjun
DOI: https://doi.org/10.3969/j.issn.1002-6819.2014.24.014
2014-01-01
Abstract:In the research of soil erosion and loss, slope runoff volume and sediment concentration are two important hydrodynamic parameters to forecast slope runoff variation, reveal soil erosion mechanism and find movement rule of soil on hill slope. There is still no special instrument which can be widely used to measure runoff rate and sediment concentration. In fact, slope runoff volume and sediment concentration should be obtained in one testing at the same time, and then the testing data can be valuable for scientific research. Therefore, it has significant meaning to develop on-line equipments to measure slope runoff and sediment concentration accurately and synchronously. In order to resolve this problem, an automatic testing device for detection of runoff rate and sediment concentration was designed based on time method and illumination method, which could overcome the shortage of traditional methods. Its working principles and electronic controlling section were described. The automatic testing device is composed of two parts, the mechanical device and the electronic testing component. The mechanical device consists of funnel-shaped device and sampling device. The electronic testing component includes three parts, i.e. runoff volume measure and control, sediment concentration measure and control, and digital display. Data acquisition and processing are performed by electronic testing component. The software design employed automatic cycle way to control SCM (single chip microcomputer) working. The testing data was saved in EEPROM of SCM. An additional experimental system was proposed for measuring sediment concentration by using above system. It is composed of measure device and testing circuit control. During the measurement of sediment concentration, keeping stirring solution is necessary to avoid silt sinking at bottom, and this is helpful to improve testing accuracy. Testing accuracy of sediment concentration is mainly affected by two factors:distance from light source to light sensor and sediment distribution uniformity in solution. A/D value output by light sensor changes along with sediment concentration. Through experiments of sediment concentration measurement, two conclusions were obtained by using least squares method and statistics theory. Firstly, the suitable rotation speed of electromotor is 428 r/min which can make sediment distribute uniformly in solution. Secondly, the best accuracy of sediment concentration measurement can be obtained when the distance from light source to light sensor is 30 mm. The variation trend between A/D value and sediment concentration can be expressed in fitted polynomial equation. At last, testing experiments were done to verify above theoretical analysis and equation by using proposed methods and parameters. The experiments included sediment concentration testing in fourteen groups of solution with different sediment concentrations. The deviation between actual value and measured value was obtained. The result shows the accuracy of sediment concentration is within 1% except the solution with 1-3 kg/m3 sediment concentration. This demonstrates the feasibility of sediment concentration measurement by light transmission method. Furthermore, experiments also indicate that the proposed automatic detection device system is able to get the values of runoff rate and sediment content synchronously, which overcomes the limitation of traditional measurement. The device can be used not only in laboratory studies of soil erosion, but also in field monitoring of runoff volume and sediment concentration. This study provides a reference to promote new method and technology improvement for soil and water conservation monitoring.