Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Platinum Nanoparticle–graphene Hybrids Synthesized by Liquid Phase Pulsed Laser Ablation As Cathode Catalysts for Li-air Batteries

Li-air rechargeable battery based on metal-free graphene nanosheet catalysts.

Platinum Nanocrystals Embedded in Three-Dimensional Graphene for High-Performance Li-O<sub>2 </sub>Batteries

Platinum Nanocrystals Embedded in Three-Dimensional Graphene for High-Performance Li-O 2 Batteries

Basal Nano-Suit of Graphite for High Energy Hybrid Li Batteries.

Platinum-Coated Hollow Graphene Nanocages As Cathode Used In Lithium-Oxygen Batteries

An Enhanced Electrochemical Performance of A Sodium-Air Battery with Graphene Nanosheets As Air Electrode Catalysts

Fe phthalocyanine supported by graphene nanosheet as catalyst in Li–air battery with the hybrid electrolyte

Graphite Nanoplates Firmly Anchored with Well-dispersed Porous Zn3V2O8 Nanospheres: Rational Fabrication and Enhanced Lithium Storage Capability

Hybrid Electrolyte Li-air Rechargeable Batteries Based on Nitrogen- and Phosphorus-Doped Graphene Nanosheets

In Situ Growth of Mesoporous NiO Nanoplates on a Graphene Matrix As Cathode Catalysts for Rechargeable Lithium–air Batteries

High density Co3O4 nanoparticles confined in a porous graphene nanomesh network driven by an electrochemical process: Ultra-high capacity and rate performance for lithium ion batteries

Novel pyrolyzed polyaniline-grafted silicon nanoparticles encapsulated in graphene sheets as Li-ion battery anodes.

Self-Assembly Of A Znfe2o4/Graphene Hybrid And Its Application As A High-Performance Anode Material For Li-Ion Batteries

Hierarchical porous yolk—shell Co-N-C nanocatalysts encaged ingraphene nanopockets for high-performance Zn-air battery

Pt Nanoparticles Confined in a 3D Porous FeNC Matrix as Efficient Catalysts for Rechargeable Li-CO2/O2 Batteries

Pencil-drawing on Nitrogen and Sulfur Co-Doped Carbon Paper: an Effective and Stable Host to Pre-Store Li for High-Performance Lithium–air Batteries

Embedding Co2P Nanoparticles in N-Doped Carbon Nanotubes Grown on Porous Carbon Polyhedra for High-Performance Lithium-Ion Batteries

Confined Growth of Li4ti5o12 Nanoparticles in Nitrogen-Doped Mesoporous Graphene Fibers for High-Performance Lithium-Ion Battery Anodes

Nanosulfur/polyaniline/graphene composites for high-performance lithium–sulfur batteries: One pot in-situ synthesis

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries