Abstract:An accurate determination of the contact pressure and local sliding in a cold rolling process is an essential step towards the prediction of the roller’s life due to wear damage. This investigation utilized finite element analysis to quantify the local contact pressure and local sliding over the rolling bite in a plate cold rolling process. It was the first study to quantify the local sliding distance in a rolling process using the Finite Element Analysis (FEA). The numerical results indicate that the local contact pressure over the rolling bite demonstrates a hill profile, and the peak coincides with the neutral plane. The local sliding distance over the rolling bite demonstrates a double-peak profile with the two peaks appearing at the forward slip and backward slip zones respectively. The amplitude of sliding distance in the backward slip zone is larger than that in the forward slip zone. A stick zone was confirmed between the forward slip and backward slip zones. According to a parametric study, the local contact pressure and sliding distance decrease when the thickness reduction is reduced or the diameter of the roller is decreased. The location of the neutral plane always presents at the rolling exit side of the rolling bite’s center. The size of the stick zone enlarges and the sizes of slip zones shrink significantly when the friction coefficient is increased. Finally, a novel concept of wear intensity was defined to examine the wear of the roller based on the local contact pressure and local sliding distance. The results show that a two-peak wear response exists in the backward and forward slip zones. The magnitude of the wear in the backward slip zone is larger than that in the forward slip zone. For a given roller and blank material combination, using a smaller thickness reduction, a smaller diameter roller and a higher friction coefficient condition can reduce the wear of the roller for a single rolling cycle. The current paper develops an understanding of rolling contact responses to the wear of the roller in rolling process. The research method can also be applied to study other rolling or sliding wear problems.

Contact Deformation Analysis of Elastic–Plastic Asperity on Rough Roll Surface in a Strip Steel Mill

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

Experimental and Finite Element Analysis on an Elastic–Plastic Hemispherical Asperity Contact Against a Rigid Flat in Plane Strain with Bilinear Hardening

Elastic-Plastic Finite Element Analysis of Multi-Asperity Contacts

Experimental and Finite Element Analysis of Plastic Domain Evolution of Rough Surfaces during Contact

Finite Element Analysis of Contact Stresses on the Backup Roll of CVC Hot Rolling Mills

Mechanic Analysis of Two-dimensional Elasto-plastic Contact with Multi-asperity Coating Surfaces

New Analytical Model of Elastic-Plastic Contact for Three-Dimensional Rough Surfaces Considering Interaction of Asperities

Advances in Studies on Asperity Peak Contacts

Analytical modeling of through depth strain induced by deep rolling

A Numerical Study on Contact Condition and Wear of Roller in Cold Rolling

Contact Analysis Between Rough Surfaces Considering the Size-Affected Deformation Behaviour of Multi-Scale Asperities

A Frictionless Normal Contact Model for Flattening Elastoplastic Single Asperity Considering Yield Plateau and Strain Hardening

A Review of Elastic–Plastic Contact Mechanics

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

Analysis of the Influence of Contact Stress on the Fatigue of AD180 High-Carbon Semi-Steel Roll

Modeling for Normal Contact of Rough Surface Based on Stress Distribution of Asperity Contact

Elasto-Plastic Asperity Contacts of Layered Media

Finite Element Analysis of Temper Rolling Process

Inelastic Contact Behaviors of Nanosized Single-Asperity and Multi-Asperity on Α-Fe Surface: Molecular Dynamic Simulations

Experimental and Finite Element Analysis of Plastic Domain Evolution of Wavy Surfaces During Contact