Abstract:This paper discusses the pulse signal of a highly sensitive lateral deformable optical microelectromechanical systems (MEMS) displacement sensor based on Wood's anomalies and its corresponding tolerance. The optical reflection amplitude of the device changes with the displacement of the nanostructured grating elements. Unexpectedly, the device's original sinusoidal signal develops into a new signal form (i.e., a pulse signal), when the air gap between the two layers of gratings decreases. Since the slope of the pulse signal, namely 2.5%/nm (i.e., 0.65 dB/nm), is eight times higher than that of the original signal form, namely 0.3%/ nm (i.e., 0.03 dB/nm), the sensitivity of the structure improves by eight times. However, this device is very sensitive to parameters such as its wavelength, period, duty ratio, and air gap. In this paper we used rigorous coupled wavelength analysis (RCWA) to analyze and optimize the respective influence of each parameter on the device's performance. We have introduced two methods to search for the optimal setting and have demonstrated the optimal settings of different incident lights. The simulation results indicate that it is close to 85% possible to achieve an actual device with the highest slope superior to 0.5%/nm and it is 64% possible that the highest slope of an actual device falls in the interval ranging from 1.0%/nm to 2.0%/nm. All the simulated data helped us better understand the tolerance of the pulse signal and guide us toward the development of an actual device. (C) 2015 Optical Society of America

Small-displacement Measurements Using High-Order Hermite-Gauss Modes

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

Axial nano-displacement measurement with high resolution and wide range based on asymmetrical illumination.

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

Axial nanodisplacement measurement based on the double-helix point spread function generated using radially polarized beams with vortex phase modulation

Efficient optical beam displacement measurements using high-order Hermite-Gaussian modes

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

Superresolution Confocal Technology For Displacement Measurements Based On Total Internal Reflection

High-Order Mode-Matching-Based Single-Cavity Coaxial Transducer for Broadband Measurement of Complex Permittivity

High Resolution Displacement Measurement by a Novel Michelson Laser

An ultracompact high-resolution displacement sensor based on self-interference effect of single optical nanograting

Study on Measurement of Dispersive Characteristics of Higher Order Mode Lamb Waves

A Small-Displacement Sensor Using Total Internal Reflection Theory and Surface Plasmon Resonance Technology for Heterodyne Interferometry

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of Dual-Axis Absolute and Relative Displacement

Experimental demonstrations of alignment and mode matching in optical cavities with higher-order Hermite-Gauss modes

Twin-beam-enhanced displacement measurement of a membrane in a cavity

Precise Displacement Measurement in Single-Beam Interferometry Employing Photonic Metamaterial with Effective Zero-Index.

Measurement of small displacement based on surface plasmon resonance heterodyne interferometry

Small-tilt measurement based on weak-value-amplification with balanced homodyne detection

A Novel Permittivity Measurement Method Using Multiple TM mn0 Modes of Cylindrical Cavity