Abstract:A cold plasma brush is generated at atmospheric pressure with low power consumption in the level of several watts (as low as 4W) up to tens of watts (up to 45W). The plasma can be ignited and sustained in both continuous and pulsed modes with different plasma gases such as argon or helium, but argon was selected as a primary gas for use in this work. The brush-shaped plasma is formed and extended outside of the discharge chamber with typical dimension of 10–15mm in width and less than 1.0mm in thickness, which are adjustable by changing the discharge chamber design and operating conditions. The brush-shaped plasma provides some unique features and distinct nonequilibrium plasma characteristics. Temperature measurements using a thermocouple thermometer showed that the gas phase temperatures of the plasma brush are close to room temperature (as low as 42°C) when running with a relatively high gas flow rate of about 3500ml∕min. For an argon plasma brush, the operating voltage from less than 500V to about 2500V was tested, with an argon gas flow rate varied from less than 1000to3500ml∕min. The cold plasma brush can most efficiently use the discharge power as well as the plasma gas for material and surface treatment. The very low power consumption of such an atmospheric argon plasma brush provides many unique advantages in practical applications including battery-powered operation and use in large-scale applications. Several polymer film samples were tested for surface treatment with the newly developed device, and successful changes of the wettability property from hydrophobic to hydrophilic were achieved within a few seconds.

A Dielectric-Barrier Discharge Enhanced Plasma Brush Array At Atmospheric Pressure

A 30 Mm Wide Dc-Driven Brush-Shaped Cold Air Plasma Without Airflow Supplement

Study on DC-Driven Air Cold Plasma Brushes Generated Without Airflow Supplement

Cold Plasma Brush Generated at Atmospheric Pressure

An atmospheric-pressure plasma brush driven by sub-microsecond voltage pulses

Characterization of Stable Brush-Shaped Large-Volume Plasma Generated at Ambient Air

Development of A Stable Dielectric-Barrier Discharge Enhanced Laminar Plasma Jet Generated at Atmospheric Pressure

Study on the Influence of Dielectric Barrier Materials on the Characteristics of Atmospheric Plasma Jet in Ar

Generation of large-scale, barrier-free diffuse plasmas in air at atmospheric pressure using array wire electrodes and nanosecond high-voltage pulses

Studies on the electrical characteristics of a radio-frequency atmospheric-pressure plasma jet array

Nanosecond Pulsed Array Wire-to-Wire Surface Dielectric Barrier Discharge in Atmospheric Air: Electrical and Optical Emission Spectra Characters Influenced by Quantity of Electrodes

Characteristics Of Atmospheric Room-Temperature Argon Plasma Streams Produced Using A Dielectric Barrier Discharge Generator With A Cylindrical Screwlike Inner Electrode

Integrated experimental and zerodimensional numerical analysis of an atmospheric pressure reactive argon plasma jet generated by dielectric barrier discharges

Electrical and Optical Properties of a Radio-Frequency Atmospheric Pressure Dielectric-Barrier Discharge in Argon and Argon-Oxygen Gases

Study of Dielectric Barrier Townsend Discharge in Air at Atmospheric Pressure

Investigation of Nanosecond Pulsed Dielectric Barrier Discharge Using Plate-to-plate Electrode with Asymmetric Dielectric Arrangement in Airflow

Discharge Characteristics of an Atmospheric Dielectric-Barrier Discharge Jet

The research on atmospheric pressure glow-like discharge plasma

Atmospheric-Pressure Dielectric Barrier Plasma Jets Elongated by Elevating External Electric Field

An Atmospheric‐pressure Microplasma Array Produced by Using Graphite Coating Electrodes

Production of Atmospheric Pressure Diffuse Nanosecond Pulsed Dielectric Barrier Discharge Using the Array Needles-Plate Electrode in Air