Abstract:Stirling-type pulse tube cryocoolers (SPTCs) working at liquid-helium temperatures are attractive in space applications because they have advantages of high reliability, compactness, etc. However, the refrigeration efficiency is as low as 0.5% of Carnot efficiency or less. A method of increasing the cross-sectional area of the regenerator at the colder part is proposed in this paper, so as to reduce the heat-associated enthalpy flow at the cold end and improve the performance of the regenerative refrigerators at liquid-helium temperatures, and it is verified through experiments for the first time. Two kinds of variable cross-sectional structures are used in the experiments, which both increase the volume of the regenerator at the colder part. The no-load temperature of the refrigerator reaches 3.87 K, which is about 0.14 K lower than that of the refrigerator with a uniform cross-sectional regenerator under the same working conditions, and the coefficient of performance (COP) is increased by 66% at 4.2 K, and the precooling temperature is 16 K in this case. Theoretical analyses show that there are several reasons for reducing the heat-associated enthalpy flow at the cold end, including: (1). increase of the heat transfer area between the working fluid and the matrix; (2). increase of the total heat capacity of the matrix at the cold end. It is found that the lower the refrigeration temperature, the more serious the real gas effect, resulting in a more significant improvement. However, the increase in the cross-sectional area causes some side effects of reducing both the impedance of the regenerator and the flow rate of the working gas, resulting in a lower heat transfer coefficient. A smaller benefit is got as the refrigeration temperature rises, and the improvement of the COP tends to vanish at about 6 K. It is also found that the performance improvement is more significant when the regenerative efficiency is lower. This new method should provide a reference for further improving the performance of the regenerative refrigerator at liquid-helium temperatures.

An Electrocaloric Refrigerator Without External Regenerator

An Electrocaloric Refrigerator with Direct Solid to Solid Regeneration

A full solid-state conceptual magnetocaloric refrigerator based on hybrid regeneration

Simulation of Chip-Size Electrocaloric Refrigerator with High Cooling-Power Density

A Chip Scale Electrocaloric Effect Based Cooling Device

Performance optimization on the irreversible regenerative Ericsson refrigeration cycle using electrocaloric materials as the working medium

Numerical Modeling of an Active Elastocaloric Regenerator Refrigerator with Phase Transformation Kinetics and the Matching Principle for Materials Selection

Numerical Investigation of Room Temperature Magnetic Refrigerator Using Microchannel Regenerators

Self-oscillating polymeric refrigerator with high energy efficiency

Concept Design And Numerical Evaluation Of A Highly Efficient Rotary Electrocaloric Refrigeration Device

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

Solid-state electrocaloric cooler controlled by a thermal switch

Varying Cross-Sectional Area of Regenerator for Improving Efficiency of 4 K Pulse Tube Refrigerator

Compact Cooling Devices Based on Giant Electrocaloric Effect Dielectrics

A self-regenerative heat pump based on a dual-functional relaxor ferroelectric polymer

Electromagnetic-driven Electrocaloric Cooling Device Based on Ternary Ferroelectric Composites

Giant temperature span and cooling power in elastocaloric regenerator

A novel electrochemical system with adiabatic pre-charging and pre-discharging processes for efficient refrigeration

High cooling performance in a double-loop electrocaloric heat pump

Modelling of elastocaloric regenerators with enhanced heat transfer structures

Development of an Experimental Rotary Magnetic Refrigerator Prototype