Abstract:Medical Infrared (IR) Imaging has become an important diagnostic tool over recent years. However, one underlying problem in medical diagnostics is associated with accurate quantification of body surface temperatures. This problem is caused by the artifacts induced by the curvature of objects, which leads to inaccurate temperature mapping and biased diagnostic results. Therefore, in our study, an experiment-based analysis is conducted to address the curvature effects toward the 3D temperature reconstruction of the IR thermography image. For quantification purposes, an isothermal copper plate with flat surface, and a cylindrical metal container filled with water are imaged. For the flat surface, the tilting angle measured from camera axis was varied incrementally from 00 to 60, such that the effects of surface viewing angle and travel distance on the measured temperature can be explored. On the cylindrical curved surface, the points viewed from 0' to 900 with respect to the camera axis are simultaneously imaged at different temperature levels. The experimental data obtained for the flat surface indicate that both viewing angle and distance effects become noticeable for angles over 40. The travel distance contributes a minor change when compared with viewing angle. The experimental results from the curved surface indicate that the curvature effect becomes pronounced when the viewing angle is larger than 60. The measurement error on the curved surface is compared with the simulation using the non-dielectric model, and the normalized temperature difference relative to 0' viewing angle was analyzed at six temperature levels. These results indicate that the linear formula associated with directional emissivity is a reasonable approximation for the measurement error, and the normalized error curves change consistently with viewing angle at various temperatures. Therefore, the analysis in this study implies that the directional emissivity based on the non-dielectric model can be applied for the calibration of measurement error. The normalized error curve serves as a consistent basis to correct the measurement error due to curvature artifacts.

Inductive Pulsed Phase Thermography for Reducing or Enlarging the Effect of Surface Emissivity Variation

Reducing the Effect of Surface Emissivity Variation in Eddy Current Pulsed Thermography

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

Thermal Emissivity Measurement with Two-temperature Method

Electrostatic Induction Thermography

Comparison of several infrared image enhancement algorithms

Theoretical and Experimental Study on Nondestructive Pulse Phase Infrared Thermography Testing Technology

Infrared Image Defect Diagnosis Through LAB Space Transformation

Curvature Effect Quantification For In-Vivo Ir Thermography

PHASE DETECTION AIDED THERMOMETRY AND ITS APPLICATION TO NATURAL CONVECTIVE SUBCOOLED FLOW BOILING IN A NARROW GAP

Study of Phase Detection in Lock-in Thermography Nondestructive Testing

The Image Processing of Phase Change Thermography

Enhancement of Thermal Diagnostics on Tumors Underneath the Skin by Induced Evaporation

A Physical-Constrained Decomposition Method of Infrared Thermography: Pseudo Restored Heat Flux Approach Based on Ensemble Bayesian Variance Tensor Fraction

Phase Detection Aided Thermometry (pdat) for Two-Phase Flow

Research on the technique of accurately measuring temperature with infrared thermal imagers

HEAT TRANSFER ANALYSIS AND FINITE ELEMENT SIMULATION OF PHASE INFRARED NONDESTRUCTIVE TESTING

Impact of the thermal afterglow effect on infrared thermography data evaluation methods

Study on Method for Measuring Coating Emissivity by Applying Active Irradiation Based on Infrared Thermal Imager

Infrared Polarization Imaging-based Non-destructive Thermography Inspection

Defect Automatic Identification of Eddy Current Pulsed Thermography