Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Microalloying Boron Carbide with Silicon to Achieve Dramatically Improved Ductility.

Improved Ductility of Boron Carbide by Microalloying with Boron Suboxide

Local amorphization in boron carbide at finite temperature: Strategies toward improved ductility

First Principles Predicting Enhanced Ductility of Boride Carbide Through Magnesium Microalloying

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Atomistic Origin of Brittle Failure of Boron Carbide from Large-Scale Reactive Dynamics Simulations: Suggestions Toward Improved Ductility.

Strengthening Boron Carbide Through Lithium Dopant

Enhanced Fracture Toughness of Boron Carbide from Microalloying and Nanotwinning

Improved Ductility of B-12 Icosahedra-Based Superhard Materials Through Icosahedral Slip

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Shear-Induced Brittle Failure along Grain Boundaries in Boron Carbide.

Boron‐dependent Microstructural Evolution, Thermal Stability, and Crystallization of Mechanical Alloying Derived SiBCN

Improving the mechanical properties and oxidation resistance of Nb-16Si-20Ti alloys with B 4 C addition

Addressing Amorphization and Transgranular Fracture of B4C Through Si Doping and TiB2 Microparticle Reinforcing

Effects of Carbon and Boron Addition on Microstructure and Mechanical Properties of TiAl Alloys

Ductility in Crystalline Boron Subphosphide (b12p2) for Large Strain Indentation

Toughened (ti0.2zr0.2hf0.2nb0.2ta 0.2)B2-Sic Composites Fabricated by One-Step Reactive Sintering with a Unique SiB6 Additive

Addressing amorphization and transgranular fracture of B 4 C through Si doping and TiB 2 microparticle reinforcing

Structure and Mechanical Properties of Boron-Rich Boron Carbides

3D Porous Metallic Boron Carbide Crystal Structure with Excellent Ductility

Thermostructural evolution of boron carbide characterized using in-situ x-ray diffraction