Abstract:1 General Introduction A key to the realization of effective microwave tunable devices, among others, is to develop adaptive materials with superior adjustability of electromagnetic parameters. Since there are two fundamental electromagnetic parameters, namely, permittivity and permeability, the tunable property can then be readily approached by manipulating (i) permittivity directly via the electric field, such as in ferroelectrics and conducting polymer [1, 2], or (ii) permeability via magnetic field, such as in ferromagnetic materials [3], or (iii) permittivity (permeability) indirectly by magnetic field (electric field) such as in multiferroics [4]. A unique class of composite materials is considered here to realize such tunable properties: ferromagnetic microwires with excellent soft magnetic properties and giant magnetoimpedance effect [5,6] were introduced into a polymer matrix material so that an indirect control of permittivity can be tuned by the magnetic field. The principle is that the magnetic field can induce significant variation of the impedance via the skin effect at high frequency. The current distribution along the wire then changes accordingly and induces the dipolar polarization [7]. There have been a few relevant studies on this subject in the open literature. Panina et al. [8] and Acher et al. [9] used the microwire arrays to realize the left-hand materials and tunable properties in the presence of magnetic field. Starostenko et al. [10] gave an in-depth discussion of the magnetic bias effect on the permittivity for random wire composites and proved the feasibility of using the wire composites to control attenuation. Di et al. [11], Marin et al. [12] and Zhang et al. [13] have demonstrated the perspective of microwire composites as microwave absorbers. In addition, our previous studies have shown that this kind of composite prove to be multifunctional for a wide range of potential engineering applications such as sensing and structural health monitoring (see e.g. [14-16]). The aim of this paper is to utilize instrumentation [17] dedicated to precise in-situ measurements of electromagnetic parameters to characterize the microwire composites over a broad frequency range and the field effect on the microwave behaviors of the wire composites for potential structural health monitoring (SHM) application.

Stress tunable microwave absorption of ferromagnetic microwires for sensing applications

Magnetic Field and Mechanical Stress Tunable Microwave Properties of Composites Containing Fe-based Microwires

Tunable Microwave Electric Polarization in Magnetostrictive Microwires

Giant Magnetoimpedance Effect in a Co-Based Microwire for Quick-Response Magnetic Sensor Applications

Smart Composites With Short Ferromagnetic Microwires For Microwave Applications

Stress-Induced Magnetic Hysteresis in Amorphous Microwires Probed by Microwave Giant Magnetoimpedance Measurements

In Situ Microwave Characterization Of Microwire Composites Under Mechanical Stress

Field/stress Tunable Behaviour of Composites Containing the Combined Current-Modulation Annealed Ferromagnetic Microwires

The role of internal stresses in microwires on their soft magnetic and microwave absorbing characteristics

Ferromagnetic Microwires Enabled Polymer Composites for Sensing Applications

Magnetic anisotropy and stress-magnetoimpedance (S-MI) in current-annealed Co-rich glass-coated microwires with positive magnetostriction

Evolution of the Magnetic Anisotropy and Magnetostriction in Co-based Amorphous Alloys Microwires Due to Current Annealing and Stress -Sensory Applications

Microwave tunable composites with melt-extracted magnetic microwires

Temperature Dependence of the Off‐diagonal Magnetoimpedance in Sensor Configuration Utilizing Co‐rich Amorphous Wires

Optimization of magnetoimpedance and stress-impedance effects in single-microwire polymer composites for stress monitoring

Co-Based Magnetic Microwire and Field-Tunable Multifunctional Macro-Composites

Optimizing the Nano-structure of Magnetic Micro-wires for Multifunctional Macro-composites

Effects of Wire Properties on the Field-Tunable Behaviour of Continuous-Microwire Composites

Stress-Dependent Magnetization Processes in Cobalt-Based Amorphous Microwires

Stress effect on magnetoimpedance (MI) in amorphous wires at GHz frequencies and application to stress-tunable microwave composite materials

Novel Magnetic Microwires-Embedded Composites for Structural Health Monitoring Applications